PDA

View Full Version : DURGA, THANKS.......


cbrook01
12-06-2008, 10:41 AM
:thumbsup:
Many thanks (especially to the 'administrator' for the advice on my problem with my Durga and it's slow acceleration. I've tightened the diff and WOW, what a massive change, rapid acceleration and a whopping top speed. really appreciated. Just a quick query, the kit came with 2 gears to choose between for the motor, will the larger of the 2 gears speed things up considerably? the track we're on is very smooth with a few tasty jumps along the way.

Thanks again for you essential advice.

Cbrook01

ps... think I'll reinstall the slipper clutch...

DCM
12-06-2008, 10:44 AM
depends on the motor, and if it can pull the bigger pinion.

And I think we are all more than willing to help those who are willing to listen :woot:

cbrook01
12-06-2008, 03:11 PM
hi, the motor is a GT3 Turbo 17x2 28.100rpm... does that help?

thanks

cbrook01

sosidge
12-06-2008, 04:13 PM
The only motor that could pull the 23T pinion in the kit is the slow one Tamiya recommend for it - any serious motor just can't pull that kind of pinion in a buggy without cooking itself alive!

I ran a 19 turn motor on a 19 or 20 pinion in the Durga - I would run roughly the same with that LRP thing too.

4 been evil
12-06-2008, 07:21 PM
I've run an 25t pinion on a HPI 17x2 motor for med size indoor track. Was quicker then a brushless 6.5 powered Durga. Was getting warm at end of 5mins but not cooking hot.