PDA

View Full Version : Double Slipper Clutch?


DaveG28
17-06-2008, 09:28 AM
New hopup on Tam USA for the 501x, a centre shaft for double slipper clutch, WTF?

Anyone any ideas, was wondering if it would be to set different slip on the front than the back, ie have the slipper on each of the 18t pulley's?

jimmy
17-06-2008, 09:38 AM
could be one of Tamiya's famously daft wordings - like the belt tensioners which aren't. :thumbsup:

bigred5765
17-06-2008, 09:58 AM
or it could just mean a new centre shaft for the exsiting slipper

DaveG28
17-06-2008, 10:24 AM
Looked some more, they are releasing a DB01 double slipper clutch, the shaft is to use that on a 501x. The DB01 already had a slipper set so it must be different in some way?

craigosh
17-06-2008, 10:35 AM
There's a center one-way listed so it aint that. Weird...!

sim
17-06-2008, 02:52 PM
Maybe the old slipper didnt work with the centre one way, so they need a new one.

DaveG28
17-06-2008, 03:46 PM
It uses a different centre shaft again from the one way one though, so I don't think this relates to the one way, not sure though!

DCM
17-06-2008, 04:15 PM
the only thing I can think of is a slipper either side of the spur gear, with the inner plates indexed to the spur gear to maybe give the slipper more 'feel'

Welshy40
17-06-2008, 08:51 PM
Well it seems that the only logical explanation is that the two slipper pads could be the meaning for double slipper clutch.


New hopup on Tam USA for the 501x, a centre shaft for double slipper clutch, WTF?

Anyone any ideas, was wondering if it would be to set different slip on the front than the back, ie have the slipper on each of the 18t pulley's?

DaveG28
17-06-2008, 09:56 PM
Well it seems that the only logical explanation is that the two slipper pads could be the meaning for double slipper clutch.

Which would mean it's nothing new, and that Jimmy was probably right at the start of this thread, that it's just badly worded!

Have been wondering if (regardless of this part) there's any advantage to having separate front/rear slippers? I would think possibly but it's a pretty blunt instrument, in terms of sending more power to one end than the other.

DCM
17-06-2008, 10:26 PM
I dunno, as they already released the slipper, I reckon it is as I described, some whacky Tamiya lateral thinking going on.....

Peasey
18-06-2008, 08:24 AM
My guess/hope would be that it's a regular slipper with an adjustable centre one-way slipper.

DaveG28
18-06-2008, 09:34 AM
Either way, I am glad to see some new parts for the 501X becoming available, even though most are mainly for the Durga, I was worried now they've had the worlds in Japan that Tamiya would drop out of the competitive side again, but this suggests they're hanging about :thumbsup:

Jimmy, do you know if they've kept an offroad team in Japan, and anywhere else?

Welshy40
18-06-2008, 04:33 PM
I agree, as you already have a rear ball diff which can be used as a slipper, and if the layshaft one way comes along then the diff at the front can be used as well.

Which would mean it's nothing new, and that Jimmy was probably right at the start of this thread, that it's just badly worded!

Have been wondering if (regardless of this part) there's any advantage to having separate front/rear slippers? I would think possibly but it's a pretty blunt instrument, in terms of sending more power to one end than the other.

Welshy40
18-06-2008, 04:35 PM
Either way, I am glad to see some new parts for the 501X becoming available, even though most are mainly for the Durga, I was worried now they've had the worlds in Japan that Tamiya would drop out of the competitive side again, but this suggests they're hanging about :thumbsup:

Jimmy, do you know if they've kept an offroad team in Japan, and anywhere else?

Well the Euro champ who won for Tamiya is still driving for them so TRF is still in development as far as I know.

Chris
04-07-2008, 08:58 AM
Also announced for the DB01:
54061 RC DB01 Double Slipper - Clutch Set

Toonz
04-07-2008, 09:40 AM
as if the car is not heavy enough:confused:

Nike
20-07-2008, 12:53 PM
@Toonz:The car isn't so heavy,if you use the new lightweigth chassis.There you've got the possibility,to leave the motor heatsink away(better for indoor) and get so a bit less weight.

The new Double-Slipper seems to be more expensive than the normal one,so it has to be more than only another Slipper Clutch.Till now i couldn't find any pics of that part.

Chris
04-08-2008, 09:41 AM
It is released, but what does it do?

http://www.1999.co.jp/dbimages/user/hobby/itbig/10072659.jpg

DCM
04-08-2008, 09:47 AM
are they in any of the shops?

jimmy
04-08-2008, 09:53 AM
Tamiya are really quite bad at showing off their wares :o- I've no idea what this is until someone does Tamiyas job for them and gets some photos out.

DCM
04-08-2008, 09:58 AM
I got this feeling that it is adjustable front and rear, but not to sure, looking at the parts list on TamiyaUSA.... as soon as someone find one online, let me know, I will buy it!

GRIFF55
04-08-2008, 10:12 AM
How is there no support/team in the uk for Tamiya? Bit strange considering we are one of the strongest nations for 10th offroad.
Or is there one?:eh?:

DCM
04-08-2008, 10:23 AM
the distributor, Hobby Co, don't support a team, they barely support the TRF cars, and parts support is nearly nil...... so everyone shops abroad for their stuff mostly, mores the shame!

jimmy
04-08-2008, 10:45 AM
I'm the support team at Nationals - ask Damo! :woot:

Chris
04-08-2008, 11:10 AM
are they in any of the shops?

It is in the shops, but you also need: 84034 TRF501X DOUBLE SLIPER CLUTCH CENTER SHAFT

DCM
04-08-2008, 11:45 AM
what shops??

GRIFF55
04-08-2008, 12:41 PM
:pcalm down mate!!

DCM
04-08-2008, 12:47 PM
it's a new Tamiya Part lol, can't, got to find one, GOT TO HAVE ONE!!!

Valium please....

Hows the car after yesterday dude? lol

GRIFF55
04-08-2008, 01:05 PM
SUUUPER FAST!!!! Went to play with the nitro nearer home after!

DCM
04-08-2008, 01:09 PM
hope you didn't nose dive that beast then dude!

AaronR
04-08-2008, 10:33 PM
http://www.tamiyausa.com/product/item.php?product-id=54061

$87 MSRP! yikes! ... and not compatible with the new center one-way.

So, wtf, this thing is able to handle 3.5 brushless motors? bmag needs one, go tell him. :P

DaveG28
04-08-2008, 11:08 PM
God knows what this does, someone buy one!!

Looks like the centre shaft comes with it.

jimmy
04-08-2008, 11:28 PM
it sounds ACE - no one knows what it is or what it does - but it's expensive and the standard slipper is already good. :thumbsup:
Agreed tho, someone buy one so we can see what the chuff it is.:D

bender
05-08-2008, 10:39 AM
By the looks of it it will also be available for the 501 as Tamiya are also releasing:

TRF501X Center Shaft for Double Slipper Clutch
Item No.84034

DCM
06-08-2008, 11:37 AM
I got one coming!!

Recycle
08-08-2008, 10:05 AM
As claimed by Tamiya(Japan), when front and rear slipped same time, such as land after jump or a bumpy surface, the acceleration will be a bit late.
But the new slipper allow front and rear drive train to slip independently, therefore to maintain maximum traction and more quick acceleration.

mog ruith
10-08-2008, 06:43 PM
wow tamiya really is creative on making hop ups for their kits eh??
a budget kit with expensive hop ups
well anyway i still love my durga trying to spend as little hop up as possible on this kit and maximise the full potential of it :thumbsup:

Yuri
11-08-2008, 06:58 AM
Hi guys, I've found some image of this thing, but it's disassembled :(

DCM
11-08-2008, 06:31 PM
Right, just finished building my Double slipper clutch, and what a clever design indeed.

Right, here we go, the outer plate drives the layshaft, which in turn, is connected to the front belt pullet. The inner plate is, in turn, connected to the rear belt pulley, the rear pulley hub sits on a bearing, which sits on the laysheft, so it is supported but is able to rotate at a different speed to the layshaft.

So, in effect, it is a slipper which can slip the front and rear belts seperately..... see how it goes on the weekend me thinks....

Pics to follow.

DCM
11-08-2008, 09:42 PM
http://i82.photobucket.com/albums/j271/DCM71/double%20slipper%20db-01/DSC00049.jpg

http://i82.photobucket.com/albums/j271/DCM71/double%20slipper%20db-01/DSC00051.jpg

http://i82.photobucket.com/albums/j271/DCM71/double%20slipper%20db-01/DSC00052.jpg

http://i82.photobucket.com/albums/j271/DCM71/double%20slipper%20db-01/DSC00054.jpg

http://i82.photobucket.com/albums/j271/DCM71/double%20slipper%20db-01/DSC00055.jpg

Chris
12-08-2008, 09:55 AM
The new slipper spring, look likes the losi diff spring... Should be an improvement.

Is the TRF501X shaft available?

millzy
12-08-2008, 09:57 AM
have you run this yet steve?

id like to see how the car drivers with this new unit

keep me posted

DCM
12-08-2008, 11:30 AM
if you look at the instruction sheet, it shows the 501X and DB01....

Chris, I am trying it this weekend (weather permitting)

The Hoff
12-08-2008, 11:49 AM
Were did you get it from dcm ?.

DCM
12-08-2008, 11:51 AM
rainbow ten, 6000yen, 1500yen EMS shipping

millzy
12-08-2008, 12:18 PM
if you look at the instruction sheet, it shows the 501X and DB01....

Chris, I am trying it this weekend (weather permitting)

Shame im away this weekend with Jay for the 8th national

DCM
12-08-2008, 01:21 PM
leave the big girl to play with his smelly stuff and come be my pit bitch in Cardiff lol

millzy
12-08-2008, 01:26 PM
haha as much as i would like to come and play with the durga in cardiff, ive been booked for this 2 months ago...plus i have his car so he needs me there.

i think you going to get rained out on sunday any way

DCM
12-08-2008, 01:30 PM
if it is persisting it down, I ain't going to have to clean four buggies when I get home!!

millzy
12-08-2008, 01:34 PM
well just think even if it is i had a smelly rc8 to clean 7 times in one day

Northy
12-08-2008, 01:46 PM
Don't run it toooo slack, at will work like a diff and just transmit power to the end with least grip :(

G

DCM
12-08-2008, 02:00 PM
the spring that comes with it wont allow it to run slack, and it really works like a slipper, just that it splits the drive to the layshaft and a hub, rather than just the layshaft, will let you know how it goes.

Northy
12-08-2008, 02:46 PM
I know how it works fella, same as D4 worlds one, trust me on the advice ;)

G

DaveG28
26-08-2008, 08:15 PM
Did you manage to run it DCM? What did you think?

DCM
26-08-2008, 08:30 PM
not had a chance to run it yet.... August has been a washout. got a meeting on the weekend, will run it then.... weather permitting.

DaveG28
28-08-2008, 12:03 AM
Wonder what part number that spacer is thats mentioned for the trf501x? If it isn't with the centre shaft then I don't think its available, meaning you can't use it with the 501x yet!

Fredrik Emilsson
30-08-2008, 10:19 PM
The spacer is included with the new centre shaft.

bombman
20-09-2009, 06:24 AM
I there any update regarding the double slipper?
Someone tried it?

Shadow
03-11-2009, 12:54 PM
is the double slipper compatible with the 511X ?

Fredrik Emilsson
04-11-2009, 08:38 AM
Iīve used this season. Yes, it fits the 511.

I have not compared it with the regular slipper, so I canīt give you any feedback. Will do when I get the chance (when our new track is ready;))

T4miy4 Guy
05-11-2009, 11:36 PM
Just after some advice regarding the double slipper!

I have this fitted to my DB-01 and the front and rear diff`s are upgraded to 501 out drives with ceramic balls.

From a hard start off the line at full throttle my DB-01 pulls frantically to the right... is this the fact that the slipper is set wrong ie to lose or is it that one of my diff`s is to lose or to tight?

Any advice lads?

Cheers Andy

dimblum
06-11-2009, 06:09 PM
Just after some advice regarding the double slipper!

I have this fitted to my DB-01 and the front and rear diff`s are upgraded to 501 out drives with ceramic balls.

From a hard start off the line at full throttle my DB-01 pulls frantically to the right... is this the fact that the slipper is set wrong ie to lose or is it that one of my diff`s is to lose or to tight?

Any advice lads?

Cheers Andy

The double slipper won't do this since it is a drivetrain part. Look to your diffs or your tires for the problem..

Your right wheels must be adding more traction than the left.. A problem with your diff could explain this.. A few causes that comes to mind are:

- One of the diff plates is slipping while the other is not
- The wrong grease or too much grease was used
- The diff screw has become bent

Your tires can also be at fault if they were glued uneven causing one of them to break free.. Uneven wear on the tires could do this as well - say if the left one was very worn while the right one still had good tread.

Check this stuff out and you might find your problem.

Alex H
06-11-2009, 06:36 PM
deleted.

T4miy4 Guy
07-11-2009, 01:21 AM
The double slipper won't do this since it is a drivetrain part. Look to your diffs or your tires for the problem..

Your right wheels must be adding more traction than the left.. A problem with your diff could explain this.. A few causes that comes to mind are:

- One of the diff plates is slipping while the other is not
- The wrong grease or too much grease was used
- The diff screw has become bent

Your tires can also be at fault if they were glued uneven causing one of them to break free.. Uneven wear on the tires could do this as well - say if the left one was very worn while the right one still had good tread.

Check this stuff out and you might find your problem.
Thanks for the reply, i`ll let you know, think the rear diff is too loose..

Andy

bombman
07-11-2009, 05:34 AM
Just after some advice regarding the double slipper!

I have this fitted to my DB-01 and the front and rear diff`s are upgraded to 501 out drives with ceramic balls.

From a hard start off the line at full throttle my DB-01 pulls frantically to the right... is this the fact that the slipper is set wrong ie to lose or is it that one of my diff`s is to lose or to tight?

Any advice lads?

Cheers Andy

It most likely the arms height, check that the front arms are exactly in the same height.
Also, if one of the shocks lacking some oil it can cause this problem.

chrispattinson
19-02-2010, 10:17 AM
Did anyone end up getting the double slipper / running it?
I do like the transmission to have a little bit of slip in it, and I keep wearing out slipper pads and pressure plates.
I think the problem is, that when the pads wear, the slipper spring stops applying pressure to the pressure plates, due to the step in the layshaft.
More shims against the bearing is probably the solution, does anyone else have issues with the slipper?

dimblum
19-02-2010, 08:22 PM
Did anyone end up getting the double slipper / running it?
I do like the transmission to have a little bit of slip in it, and I keep wearing out slipper pads and pressure plates.
I think the problem is, that when the pads wear, the slipper spring stops applying pressure to the pressure plates, due to the step in the layshaft.
More shims against the bearing is probably the solution, does anyone else have issues with the slipper?

I have been using the single sipper (since I also run a center-one-way). I have not had any trouble with the slipper pads wearing down quickly; in fact I am still using the same pads after one year of club racing with a Novak 6.5T.

I am using the default Tamiya build and settings for the slipper clutch. I run my spring tension between 3-4mm (this is shown as a 3-4mm gap between the nylock nut and the end of the threaded layshaft assembly). This tension has always worked great, I'm just careful to ensure that the spring is perfectly centered so the tension is equal.

DCM
19-02-2010, 08:52 PM
the pads don't wear, they glaze over, which need to then either be replaced or scraped.

I use the double slipper.

samd
19-02-2010, 09:39 PM
Advantages of a double slipper over a standard type anyone??

94eg!
19-02-2010, 10:22 PM
Advantages of a double slipper over a standard type anyone??

Allows the front axle to slip independent of the rear axle. The theory is that this allows you to get back on power quicker than standard slipper. It also adds further protection to the drivetrain.

Say your landing on your rear wheels first. The impact will not transmit the shock to the front diff. And likewise, the rear diff does not have to accelerate the mass of the front axle. Pretty cool design actually...

DCM
19-02-2010, 10:30 PM
it is on landings really, that you gain the advantage, it doesn't squirm as much under power off a jump.

RBX
20-02-2010, 03:27 AM
Theres a thread in the kyosho forum about a new type of slipper for the lazer it seems to work the same way as the double slipper, but you can change the slipper pad compound to alter the slip amount between F & R.

artica
02-04-2010, 08:06 AM
Any chance of the double slipper fitting in the ta05?
I'd like to get a chance at counter steering for Drift.
I've heard that the Yokomo D-max has a slipper clutch that
allows you to set the slippage differently, front to rear.
Let's say that if it does, would I be able to set it so the front slips much more than the rear?

sim
17-10-2011, 05:42 PM
So what is the lowdown on the B4/DB01 pad combo? Which pad slips more, the Tamiya or the B4? Am I right in thinking I want the rear to slip more than the front? Thanks.