PDA

View Full Version : Which Kyosho Optima is it??


Durango
21-12-2012, 03:48 PM
Hi Guys,

Got that Kyosho Optima today...tought it was a Optima Mid Custom Special, but now I'm not so sure because of the body. Can someone help me to identify this chassis?

What's the difference between the Mid Custom Special and the Turbo Optima Mid Special?

If someone has parts, just let me know by pm...thx!

PS: yes, i know, the body ist simply beautyful... :)

http://666kb.com/i/ca0hbyw3lba5atipp.jpg

http://666kb.com/i/ca0hcbexwefafvr3x.jpg

http://666kb.com/i/ca0hez0ypdkhu2a65.jpg

http://666kb.com/i/ca0hgrcffru3d318d.jpg

http://666kb.com/i/ca0hhsemw4qdfg5bx.jpg


Cheers - Daniel

oli4ke
21-12-2012, 04:09 PM
That's a LWB optima mid custom with FRP chassis and a lazer ZX-R bodyshell!

Brand new genuine OT-93 bumper you can find here ==> http://www.benl.ebay.be/itm/GENUINE-Kyosho-OT-93-Bumper-Optima-Mid-Series-Lazer-ZX-ZXR-ZXRR-FREE-SHIPPING-/110983494211?pt=LH_DefaultDomain_123&hash=item19d721ba43

Durango
21-12-2012, 04:22 PM
Thank you! How do you recognize it? And what's the difference between all these Optima's?

Naushad
21-12-2012, 04:55 PM
Wait for terry s.c.'s reply!

Durango
21-12-2012, 08:14 PM
Ok, i'll wait...

Would be interesting to see the differences between all these optima cars because I don't know it. I was sure that it was an Optima Mid Custom Special...

Cheers - Daniel

terry.sc
21-12-2012, 10:03 PM
As I've been mentioned, here we go.

The buggy is an Optima Mid Custom Special, with Schumacher rear shocks and longer Schumacher ball joints on the front shocks. The body is a Racecraft Lazer ZX-R body, identified as a Racecraft shell as it includes the gear cover moulded in and has less detail on the front of the body. Wheels are HPI Super Star. The front anti roll bar is a Kyosho option part.

It is a Custom Special, not just a Custom, because it has Kyosho gold shocks, universals in front instead of dogbones all round, turnbuckles and the FRP brace above the motor.


What's the difference between the Mid Custom Special and the Turbo Optima Mid Special?The Mid Custom Special was the high spec production version of the long wheelbase Mid, the Turbo Optima Mid Special was a limited edition version that came with every option available at the time.

The Custom Special has a black fibreglass chassis, front universals, gear diffs and one piece wheels with the standard Mid tyres. The Turbo Optima Mid Special has a carbon fibre chassis and top deck, universals all round, anti roll bars, ball diffs and includes two sets of Kyoshos Turbo Optima three piece wheels with two sets of Option House tyres. The Turbo Optima Special has a body that is almost the same as the Mid Custom body, but without the bubble moulded in the side pod to clear the servo arm for the mechanical speed controller.

Durango
22-12-2012, 11:51 AM
Wow, someone seems to know what he's talking about! Thank you for the detailed explenation!

So as you see i will need some parts:

- front bumper
- new upper deck
- new wing mount
- wheel set + tires
- ...

Already I've got brand new shocks! If you have some parts to trade/sell, just let me know by pm please...

How could I clean the alloy parts (motor plate...)?

Cheers - Daniel

Naushad
22-12-2012, 03:06 PM
Wire wool with a bit of wd40 on it then wet and dry sanding paper. Finish with autosol polish

Durango
22-12-2012, 07:43 PM
Ok, thx, I'll try it... Autosol Aluminium Polish?

oli4ke
22-12-2012, 09:50 PM
If you need a new genuine front bumper Ot-93 you can find the eBay link in my previous post.

Naushad
22-12-2012, 10:33 PM
Ok, thx, I'll try it... Autosol Aluminium Polish?

Yep!

Durango
25-12-2012, 12:52 PM
Ok thanks!

Already ordered some parts and they are on the way to me:

- OT-69 Suspension arms
- OT-55 C-hubs
- OT-45 Rear hubs
- OTW-6 Upper Deck
- complete set of original Kyosho gold shock, front + rear

...all this parts are brand new, nip :)

Do someone has a link for the appropriate screws?

Cheers - Daniel

Durango
27-12-2012, 03:22 PM
Could someone give me the rigt part number of the FRP chassis plate (for Optima Mid Custom Special)?

OT-122 was the alloy plate from the Optima Mid Custom, right?

Cheers - Daniel

terry.sc
27-12-2012, 03:57 PM
OT-122 is the alloy chassis
OT-128 is the fibreglass chassis
OTW-5 is the carbon fibre chassis in the Turbo Mid Special

Naushad
27-12-2012, 05:22 PM
Finding the original screws may be hard to source...

Try eBay. You may find an intact Kyosho screw box set (small blue box), otherwise I would measure up the metric screws and source stainless steel hex equivalents. However, finding the small diameter ones e.g. 2.6 mm, may be difficult.

Ok thanks!

Already ordered some parts and they are on the way to me:

- OT-69 Suspension arms
- OT-55 C-hubs
- OT-45 Rear hubs
- OTW-6 Upper Deck
- complete set of original Kyosho gold shock, front + rear

...all this parts are brand new, nip :)

Do someone has a link for the appropriate screws?

Cheers - Daniel

Durango
27-12-2012, 08:34 PM
Thank you guys for your help!

Will try at my local dealer for the screws... I remind as I once bought a smal kyosho philips screw set from him, but it wasn't specific for a kyosho car...

Cheers - Daniel

richie.
27-12-2012, 10:51 PM
very interesting, I'm now beginning to think what I thought was my Lazer ZX is now actually an optima! is there much noticeable differences between the two? I will grab it from the loft and post pics

terry.sc
27-12-2012, 11:12 PM
The Mid and Lazer can look similar at a quick glance, but they are very different. There's almost nothing the same between them, but a lot of parts are interchangeable.

A quick at a glance way of telling is the Mid has short wishbones as seen above, the Lazer wishbones are longer and go right inside the wheels. Now the Lazer suspension can fit on a Mid and the absolute guarantee of which car you have is the layshaft end. The Mid has a flat end on the layshaft with a large E-clip holding the bearing in place, the Lazer has a threaded end with a nut holding the one way in place.

richie.
27-12-2012, 11:39 PM
The Mid and Lazer can look similar at a quick glance, but they are very different. There's almost nothing the same between them, but a lot of parts are interchangeable.

A quick at a glance way of telling is the Mid has short wishbones as seen above, the Lazer wishbones are longer and go right inside the wheels. Now the Lazer suspension can fit on a Mid and the absolute guarantee of which car you have is the layshaft end. The Mid has a flat end on the layshaft with a large E-clip holding the bearing in place, the Lazer has a threaded end with a nut holding the one way in place.


Thanks for that, from this I'd say it is a Lazer but Ill post some pics up. I'd like some advice on where to start in a restoration and general clean up as it was never the work of art condition wise that some guys had theres in at the club.

richie.
30-12-2012, 10:51 PM
Heres some pics of my Lazer is there anything that can be said on the parts that may or may not have been added to make it to unorigonal? Id also like to ask if you guys experienced poor steering lock with these and if theres anything that would indicate why that is on mine? I came accross this manual in my pit box so unless its just been thrown in when my dad bought it, its looking like a zx

thanks rich.

http://i1115.photobucket.com/albums/k551/stonboy/photo-47.jpg
http://i1115.photobucket.com/albums/k551/stonboy/photo-46.jpg
http://i1115.photobucket.com/albums/k551/stonboy/photo-44.jpg
http://i1115.photobucket.com/albums/k551/stonboy/photo-42.jpg
http://i1115.photobucket.com/albums/k551/stonboy/photo-41.jpg
http://i1115.photobucket.com/albums/k551/stonboy/photo-48.jpg

keithrc
30-12-2012, 11:11 PM
Looks like a ZX-R to me, aside from the body and wing there's no belt cover.


Keith;)

richie.
30-12-2012, 11:28 PM
Looks like a ZX-R to me, aside from the body and wing there's no belt cover.


Keith;)


It had a real shoddy old looking body and wheels which I updated about ten years ago so that bit is down to me. If I remember correctly it did have an opening in the shell with seperate spur cover. I did notice the belt cover in the manual and on the current optima restorations going on at the moment, it has never had the cover for as long as i have owned it but guessing the previous owner could have thrown it?

terry.sc
31-12-2012, 12:17 AM
That's a Lazer ZX-R, with a GPM front shock mount and a Kyosho Lazer ZX rear shock mount. Alloy wishbone mounts are SRM Racing ones.
The only Lazer that had a belt cover was the ZX, with a huge moulded plastic chassis spine that meant the top deck had to be in two pieces. The first thing any racer did was throw away the belt cover and fit a one piece top deck to stiffen up the chassis. You can find the correct manual here. (http://www.retromodelisme.com/manuel_page/52/lazer-zx-r-kyosho.html)

The lack of steering lock will be down to the steering "upgrade" that has been done to it. The servo has been turned round by 90 degrees, it should be mounted on an alloy plate that's missing which prevents it being mounted as it should. Then a Tamiya servo saver has been used which is smaller than the Kyosho one, so you will get less throw from it anyway, but because of the step in the servo saver preventing the servo moving properly with the link fastened in the centre the link has been screwed onto it off centre so limiting the amount of movement.

Replace the servo saver so you can centre the linkage properly. Ideally with one with a longer arm. I use a large Kimbrough saver, but you will need to lift the servo off the chassis with spacers under the servo mounts. If you still haven't got enough throw move the servo linkage inwards on the steering arm to get the steering to swing further.

oli4ke
31-12-2012, 01:58 AM
That's a Lazer ZX-R, with a GPM front shock mount and a Kyosho Lazer ZX rear shock mount. Alloy wishbone mounts are SRM Racing ones.
The only Lazer that had a belt cover was the ZX, with a huge moulded plastic chassis spine that meant the top deck had to be in two pieces. The first thing any racer did was throw away the belt cover and fit a one piece top deck to stiffen up the chassis. You can find the correct manual here. (http://www.retromodelisme.com/manuel_page/52/lazer-zx-r-kyosho.html)

The lack of steering lock will be down to the steering "upgrade" that has been done to it. The servo has been turned round by 90 degrees, it should be mounted on an alloy plate that's missing which prevents it being mounted as it should. Then a Tamiya servo saver has been used which is smaller than the Kyosho one, so you will get less throw from it anyway, but because of the step in the servo saver preventing the servo moving properly with the link fastened in the centre the link has been screwed onto it off centre so limiting the amount of movement.

Replace the servo saver so you can centre the linkage properly. Ideally with one with a longer arm. I use a large Kimbrough saver, but you will need to lift the servo off the chassis with spacers under the servo mounts. If you still haven't got enough throw move the servo linkage inwards on the steering arm to get the steering to swing further.


I love your knowledge terry.sc :thumbsup::D

richie.
02-01-2013, 11:27 PM
That's a Lazer ZX-R, with a GPM front shock mount and a Kyosho Lazer ZX rear shock mount. Alloy wishbone mounts are SRM Racing ones.
The only Lazer that had a belt cover was the ZX, with a huge moulded plastic chassis spine that meant the top deck had to be in two pieces. The first thing any racer did was throw away the belt cover and fit a one piece top deck to stiffen up the chassis. You can find the correct manual here. (http://www.retromodelisme.com/manuel_page/52/lazer-zx-r-kyosho.html)

The lack of steering lock will be down to the steering "upgrade" that has been done to it. The servo has been turned round by 90 degrees, it should be mounted on an alloy plate that's missing which prevents it being mounted as it should. Then a Tamiya servo saver has been used which is smaller than the Kyosho one, so you will get less throw from it anyway, but because of the step in the servo saver preventing the servo moving properly with the link fastened in the centre the link has been screwed onto it off centre so limiting the amount of movement.

Replace the servo saver so you can centre the linkage properly. Ideally with one with a longer arm. I use a large Kimbrough saver, but you will need to lift the servo off the chassis with spacers under the servo mounts. If you still haven't got enough throw move the servo linkage inwards on the steering arm to get the steering to swing further.

Thanks for the info terry! I have found the missing metal plate in my parts bag, is it better off restoring the origonal servo positionin or is the current 'upgrade' position better once fitted up properly?

richie.
04-01-2013, 09:35 PM
So I've done a bit more digging into the history of my cars origins. What I've came accross is the fact my car has the short gold front shock absorbers whereas the zxr had the updated long versions, although my car seems to have some zxr characteristics Would it not seem unlikely to replace them with the old design suggesting this is a tweaked zx?

terry.sc
05-01-2013, 01:05 AM
Well it could have started as either, but it does have the ZX-R top deck and steering centre link. Looking again at the pictures the one that would decide it is blurred so you can't see the spur gear clearly.

If it has front and rear gear diffs and a ball diff inside the spur gear it was a ZX, if it has front and rear ball diffs and a slipper clutch on the spur gear it was a ZX-R.

richie.
06-01-2013, 12:34 AM
Well it could have started as either, but it does have the ZX-R top deck and steering centre link. Looking again at the pictures the one that would decide it is blurred so you can't see the spur gear clearly.

If it has front and rear gear diffs and a ball diff inside the spur gear it was a ZX, if it has front and rear ball diffs and a slipper clutch on the spur gear it was a ZX-R.

Jackpot, from that info I downloaded a zxr manual and compared the exploded view from both cars and I can clearly see the differences of what you have pointed out on the spur, its a ZX. Funny thing is I always thought it had a slipper! I cant understand how the miniscule changes between the diagrams make the difference although when I strip it apart it should make more sense. As for the gear diffs it remains to be seen if they were upgraded!

Thanks again Terry