PDA

View Full Version : losi not working


thedarkside69
26-12-2012, 06:37 PM
the steering works but the engine wont move any ides where to start

rondoolaa
26-12-2012, 06:43 PM
you say engine but some younger rc peeps may say that when meaning motor,

is it a nitro car or an electric car, ?

which model is it, ?

Shaun_TLR
26-12-2012, 06:58 PM
sounds like somethings wired incrrectly. or something stupid.... like battery dead?

thedarkside69
26-12-2012, 07:08 PM
sorry new to the terms lol i call everything an engine is losi 22 brushless motor just going over the wires now and cleaning ect

racingdwarf
26-12-2012, 07:26 PM
Hi mate, was it yours that was gogging sunday?, gogging is stuttering when trying to pull away and sounding rough.

Is your setup sensored or sensor less?

Dufty07
26-12-2012, 07:26 PM
try unplugin and clean sensor lead
or reset speedo

mattr
26-12-2012, 08:44 PM
"cogging"
try setting the esc back to factory settings, one you've checked that all the leads are where they are meant to be.
check the tx and rx are set up correctly (end points etc)
what radio/esc/motor do you have?

thedarkside69
26-12-2012, 08:48 PM
Hi mate, was it yours that was gogging sunday?, gogging is stuttering when trying to pull away and sounding rough.

Is your setup sensored or sensor less?wasnt mine im gonna leave it till i come downt he track friday it sort of spun up then stopped and the esc had red and green lights light up

racingdwarf
26-12-2012, 09:13 PM
Ok, good plan I hope to be there for an hour or so so we can have a play with it, if your getting lights and somthing happening I suspect it is somthing we can get to the bottom of:)

thedarkside69
26-12-2012, 10:10 PM
Ok, good plan I hope to be there for an hour or so so we can have a play with it, if your getting lights and somthing happening I suspect it is somthing we can get to the bottom of:)excellent see you then :D