View Full Version : DB02 Leonis
Aussie Top Force
14-01-2013, 11:45 AM
Picked this one up from Stella for our daughters B'day! She was very happy. Should be an interesting build and a good car to get her to learn racing with. She was happy to meet Jimmy and Vicky at St Ives last year too!
I'll be happy post some build pictures as we progress.:)
Aussie Top Force
19-01-2013, 09:12 AM
The 'Leonis' was an interesting build. The centre gearbox is probably one of the most technical gear boxes I've ever had to build for a 1/10th Off Road buggy. It is very unique. Further, I added the optional slipper clutch as this car will see some racing and 'big' jumps.
However now that it is built, the 'on the table' tests as a roller provides some interesting analysis. The car will definitely require the optional universal shafts in both the front and rear suspension. The dog-bone set up includes o-rings in the diff housing drive cups to keep the dog bones in place. The result is they bind up the suspension travel, a lot! Thus the universals will be ordered very soon along with the metal drive cups for the drive shafts between the gear boxes.
As the car is for my daughter to learn and race with, the CVA shocks wont be replaced for a while yet.
The front gear box is identical to the 502X however the rear gearbox has a different housing halves to the 502X as to obtain the angle so the drive shaft sits over the battery.
MHeadling
19-01-2013, 10:08 AM
Nice one, glad to see someone is racing the DB02, I think jimmys got one?
Cool looking car if you ask me!
Let us know how it goes on track
Aussie Top Force
19-01-2013, 10:41 AM
Nice one, glad to see someone is racing the DB02, I think jimmys got one?
Cool looking car if you ask me!
Let us know how it goes on track
Will do!
taomo
19-01-2013, 01:09 PM
Nice car! lots of fun will give you!
How about the electronics for it?
Universal shafts are required. You can buy the WO Universal Shafts (#54118 & #54119) for the 502x and put the 502x ones to the DB02 :thumbsup:
I see the rear suspension mount is in plastic. Could be interesting to buy the aluminum one (#54441) or protect it as I do (for example photo 1 (http://imageshack.us/a/img841/3669/02rearsuspensionmountpr.jpg) & photo 2 (http://imageshack.us/a/img692/7897/01rearsuspensionmountprx.jpg)) if big jumps are wanted (I broke one in a short jump in my 502x and loose the suspension ball and the spacer...).
Hope we will see the Leonis in the track soon! :)
Aussie Top Force
19-01-2013, 11:26 PM
Nice car! lots of fun will give you!
How about the electronics for it?
Universal shafts are required. You can buy the WO Universal Shafts (#54118 & #54119) for the 502x and put the 502x ones to the DB02 :thumbsup:
I see the rear suspension mount is in plastic. Could be interesting to buy the aluminum one (#54441) or protect it as I do (for example photo 1 (http://imageshack.us/a/img841/3669/02rearsuspensionmountpr.jpg) & photo 2 (http://imageshack.us/a/img692/7897/01rearsuspensionmountprx.jpg)) if big jumps are wanted (I broke one in a short jump in my 502x and loose the suspension ball and the spacer...).
Hope we will see the Leonis in the track soon! :)
I haven't settled on the electrics yet. The car will be run in novice class and stock for some time. So I'm looking at stock combo deals (ROAR Legal). I don't want to spend a fortune at this stage, i.e. LRP Reedy, like I did for the 502X.
That said the LRP and Reedy combination in the 502X is awesome, but this is a beginners car, on a budget. The radio will likely be an entry level Sanwa/Airtronics.
jimmy
19-01-2013, 11:41 PM
I will publish my review of the Leonis soon - it won't be kind :bored:
djmcnz
19-01-2013, 11:44 PM
I will publish my review of the Leonis soon - it won't be kind :bored:
:confused::o
How can it be that bad! :(
jimmy
19-01-2013, 11:49 PM
I've never completed a qualifying run with it :lol:
Aussie Top Force
21-01-2013, 06:31 AM
Any mods Jimmy?
I've ordered universals front and rear (suspension) and metal drive cups (inner driveshafts). May even need to get the universals for front rear centre driveshafts where they enter the gear boxes. 502X ones wont fit:thumbdown:
With all those mods in place it should be as bullet proof as a 502X:confused:
MHeadling
21-01-2013, 07:31 AM
Thats a shame Jimmy, it's such a cool design, unlike tamiya to design a unreliable car.
The Durga was a fantastic car from what iv seen, a great beginners car and capable race car too.
Iv been looking at the Db02 on line and all the hop ups, could have saved me some dosh!
Aussie Top Force
02-02-2013, 10:24 AM
Here it is all painted up. I've also installed some hop up options on the centre drive shafts, the universal system, similar to 502X upgrade. Still waiting on universals to replace dog bones in the suspension arms? They were ordered before the centre drive shafts?
I've also installed a 'Team Powers' ESC and 17.5T motor combo from Stella for a huge $72.00 (bargain). Was very well packed and presented. Will be interesting to see how it goes soon. I just need to order a new radio unit and a servo.
silver vtec
02-02-2013, 01:16 PM
congratulations! Nice car!
taomo
02-02-2013, 03:01 PM
Nice car! you know how to paint well your cars! I want to see it in action ;)
DaveG28
24-02-2013, 04:05 PM
Edit: Ah, now I get it!
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.