New kit....

[discothesnake]

Looks interesting. Wish I'd kept my B44.1......

http://www.redrc.net/2013/01/azarashi-grayseal-b44-conversion-kit/#more-61450

[jayst]

how much is it gonna be darren @ dms ???

[discothesnake]

I know the Durango version is €299 so I'd imagine about the same.

Crazy money but interesting.

[Spencer Mulcahy]

And me please how mucho Dazo need a new 4wd.

[Rayzerp]

That motor/lipo layout looks like it would make a great DB1 style 2wd....but as a 4wd is all the weight too far back?

[SamRCRacing]

just take out the front diff and driveshaft :p :thumbsup:

[Darren Boyle]

Hi all....

Thanks for te interest. The first prototype version arrived with us on friday and was built up over the weekend. The car is ready minus wheels/tyres and electrics, just waiting for the body to come back from being painted and it will get its first run maybe this weekend or into next week now.

There are several more pictures of the car on our X-Factory facebook page and also from there severl of the big news websites have been reporting on it today also incluidng Area 52 and Red RC, there is a full info page now up on the Team Azarashi website too.

We will be doing a small press release on it tommorow confirming a few detials too, we are also hoping we may have the confirmed price for the UK by then also, but if not it will be ASAP. I expect the full RRP to fall betwwen £200/250 (but individual dealer prices will no doubt vary) but bare in mind it is of the highest quality and from Japan so dont expect it to be too cheap......

The motor is actualy back by about 2/3rd of a motor length, since the stubby LIPO is longer than a normnal saddle, the weight balance is actually quite inetersting and overall it is a VERY light car that requires ballast to make it up to the weight limit (and there is handy pocket for that ballast to sit right in the front half of the chassis) ;) keeping the front to rear bias in check.

As for a good 2wd conversion, I dont think so, not in my opinion...

More news as we get it.

[jayst]

cheers for the info darren :thumbsup:

[Steven Forster]

Hi all....

Thanks for te interest. The first prototype version arrived with us on friday and was built up over the weekend. The car is ready minus wheels/tyres and electrics, just waiting for the body to come back from being painted and it will get its first run maybe this weekend or into next week now.

There are several more pictures of the car on our X-Factory facebook page and also from there severl of the big news websites have been reporting on it today also incluidng Area 52 and Red RC, there is a full info page now up on the Team Azarashi website too.

We will be doing a small press release on it tommorow confirming a few detials too, we are also hoping we may have the confirmed price for the UK by then also, but if not it will be ASAP. I expect the full RRP to fall betwwen £200/250 (but individual stire prices will no doubt vary) but bare in mind it is of the highest quality and from Japan so dont expect it to be too cheap......

The motor is actualy back by about 2/3rd of a motor length, since the stubby LIPO is longer than a normnal saddle, the weight balance is actually quite inetersting and overall it is a VERY light car that requires ballast to make it up to the weight limit (and there is handy pocket for that ballast to sit right in the front half of the chassis) ;) keeping the front to rear bias in check.

As for a good 2wd conversion, I dont think so, not in my opinion...

More news as we get it.

Is this a conversion for a b44.1 or is it a full kit ???

cheers

[lcpvcce]

Is this a conversion for a b44.1 or is it a full kit ???

cheers

Conversion kit only and first of all you need have B44 or B44.1 but not B44.2
...................;)

[Chrislong]

Looks very stylish! :thumbsup:

[buggy#0]

Just out of interest, why won't it work with a b44.2?

[Richard Lowe]

I'd imagine it's be the wider slipper and bulkhead spacing on the 44.2.

[tisher]

wow £250 plus stubby lipo plus low profile servo plus ballast weight gonna be expensive for the average b44.1 owner to convert

[Darren Boyle]

Just out of interest, why won't it work with a b44.2?

Rich is correct, the centre bulkhead spacing to accomodate the VTS slipper is too wide for this car, only the original B44 or B44.1's are suitable.

However in my opinion that may not be a bad thing.... anyone who has just spent out good money on a B44.2, "probably" wants to run it as just that..a B44.2, but owners of older B44's or B44.1's who fancy a change or a freshen up may just see the Grayseal as the option for them and in most cases it will still be cheaper than buying an all new 4wd car....

[Darren Boyle]

wow £250 plus stubby lipo plus low profile servo plus ballast weight gonna be expensive for the average b44.1 owner to convert
Indeed, coming from Japan we knew it would never be cheap, it looks likely that we are homing in on a UK RRP of £235 (still to be confirmed and set in stone) however a TLR22 kit is RRP £235 and they are widely avialable for anything from £185+ in the shops....

Stubbies, many people now own already with the current crop of 2wd's, similair for low profile servos

The full conversion will include;

Carbon Fibre slimline main chassis
Carbon Fibre slimline front top deck
Carbon Fibre slimline rear top deck
Carbon Fibre (4mm thick) front shock tower
Carbon FIbre (4mm thick) rear shock tower - that can take AE B44 or Yokomo BMax wing mount options
Carbon Fibre battery strap
Low profile servo mounts and mounting hardware
Clear Lexan "Grayseal" ultra low bodyshell
Clear lexan undertray
Titanium countersunk screw kit for underside of car
Azarashi Grayseal decal sheet
Instruction manual

[D20MCK]

Looks interesting. Wish I'd kept my B44.1......

http://www.redrc.net/2013/01/azarashi-grayseal-b44-conversion-kit/#more-61450

Xray for sale soon then Dave?

[lcpvcce]

Just out of interest, why won't it work with a b44.2?

due to +8mm problem.........;)

[Spencer Mulcahy]

Just waiting for the chassi now. (And the money for it)

[Toyman]

What is the conversion going to improve?

[Oliv996]

That motor/lipo layout looks like it would make a great DB1 style 2wd....but as a 4wd is all the weight too far back?

I'm working on DB1 like as you mentionned. Please have a look on the following link. Sorry it's in French language: HERE (http://www.rc4ever.com/phpBB3/viewtopic.php?f=135&t=7623)

[lcpvcce]

I'm working on DB1 like as you mentionned. Please have a look on the following link. Sorry it's in French language: HERE (http://www.rc4ever.com/phpBB3/viewtopic.php?f=135&t=7623)

Wow ......... mid42 is coming ............ :woot: