PDA

View Full Version : Original Lazer ZX advice please


schmoov3
02-02-2013, 08:31 PM
Hello Everyone. This is my first post here as have been away from the hobby for many years. You know normal stuff. house, kids, money, no time etc. Anyway, I have recently been helping my dad sort out his loft and i found my old RC gear. A Tamiya Hornet from the early eighties which isn't in the best of shape, and my Lazer ZX from 1989. This is in very good shape apart from some bodywork damage due to how it was stored. To be honest, the car wasn't used a great deal and was never raced. All original with an old speedmaster silver star ESC. My first thought was to sell it if I'm honest, but when I showed it to my daughter she was very eager to get it going again which would be great for old times sake and I would like to get back into again. No heavy bashing. Just running it on car parks and flat beaches. I have been reading many threads over the last few weeks regarding these cars but there are a few questions I would love some help with if you could please. This forum seems to be full of people with vast knowledge and always willing to help people when needed so any responses would be gratefully received.
1. Wheels and tyres; From what I have read it seems that people can use the mad rat range as they are a direct fit?
2. Bodyshell; Would the parma tomcat repro be a perfect fit from Kamtec and do they sell the under body?
3. Modern Electronics; I would like to run a brushless setup. Would this be safe to do so? If so what modifications, if any, would I need to do, and what would be your recommendation on the brushless power and lipo setup.
4. Spares; It seems a lot of spares are still readily available but are there any parts which are extremely hard to come by?

Thanks again for your time in reading this.

Crashtest33
02-02-2013, 11:35 PM
Hi there!
I did the kids thing too so know how you feel! Used to race the ZX-R back in 1992 as a 10 yr old!
Anyways.
The ZX is fine to run on modern electrics but dont go lower than a 10.5 turn brushless motor (unless you're racing you wouldn't need to).
Any modern Kyosho 1/10 4wd wheels will be a direct fit and most people use the Schumacher Yellow pins or mini-spike tyres with chubby foam inserts.
Keep the original wheels if you can as in good condition they're worth a lot!
With regard to a shell, just buy an original repro from team bluegroove.
Most parts are hard to come by but if you're willing to part with serious dough you can get most stuff.
If I were you tho, if I had no interest in vintage RC I would wash/clean it, fit a repro shell n graphics and sell the lot to a collector for 300 notes and buy a RTR kit for a ton!

Hope this helps
Nick

schmoov3
03-02-2013, 12:33 AM
Hi Nick. Thanks very much for the quick response. Looking on ebay only boxed zx's seemed to be getting serious cash. I am really surprised its worth that much. It is very tidy though and I have some of the old kyosho motors to put with it. decisions time it is then. If I did sell I would be tempted for a 1:8 RTR buggy. Don't know what to do now!

terry.sc
03-02-2013, 12:58 AM
Hi and welcome back. Many of us are old racers who have come back into the hobby, and some of us just never stopped.

1. Wheels and tyres; From what I have read it seems that people can use the mad rat range as they are a direct fit?The 12mm hex drive is one of two modern wheel standards, so there are plenty of options. The Mad Rat wheels are a direct fit, there are 5 spoke wheels made for the old Lazer from JC Racing (http://www.jcracingproducts.co.uk/products/), Tamiya Dark Impact wheels, modern Kyosho wheels and many others.

2. Bodyshell; Would the parma tomcat repro be a perfect fit from Kamtec and do they sell the under body?They don't sell the underbody. If you want the underbody you will have to buy the Lazer ZX-R underbody from Team Bluegroove (http://www.ebay.co.uk/itm/KYOSHO-LAZER-ZXR-ZX-R-UNDER-COWL-laser-/150681666977?pt=US_Character_Radio_Control_Toys&hash=item231553c5a1). Team Bluegroove also do Lazer ZX (http://www.ebay.co.uk/itm/KYOSHO-LAZER-ZX-BODY-AND-WING-laser-optima-/150419134837?pt=US_Character_Radio_Control_Toys&hash=item2305add975) and ZX-R (http://www.ebay.co.uk/itm/KYOSHO-LAZER-ZX-R-ZXR-BODY-vintage-optima-gallop-/150790839770?pt=US_Character_Radio_Control_Toys&hash=item231bd59dda) bodies.

3. Modern Electronics; I would like to run a brushless setup. Would this be safe to do so? If so what modifications, if any, would I need to do, and what would be your recommendation on the brushless power and lipo setup.The Lazer can handle most motors, certainly anything you would be looking at if you aren't talking about serious racing, at which point you would be looking at a modern car anyway. We used to race with the equivalent of down to a 7.5 brushless, but even a 13.5 will be fast enough if you aren't racing.

4. Spares; It seems a lot of spares are still readily available but are there any parts which are extremely hard to come by?Lots of spares are readily available, the problem is the wishbone mounts and the front gearbox are the parts which always break and they are almost impossible to find. If you have a set of the alloy wishbone mounts that were available at the time that's on eproblem fixed, and the gearbox can be better supported by replacing the front shock mount with one with a top brace to stop it twisting, such as this one by Fybre-Lyte. (http://www.fibre-lyte.co.uk/fl/cars/kyosho/kylaz1.html)

terry.sc
03-02-2013, 01:06 AM
Hi Nick. Thanks very much for the quick response. Looking on ebay only boxed zx's seemed to be getting serious cash. I am really surprised its worth that much.If it's been built and run it's not worth anywhere near £300. Depending on condition used it would fetch anywhere between £50-100, maybe up to £120 with electrics. Adding a repro body won't make much difference to the price at all.

schmoov3
03-02-2013, 02:06 AM
Hi Terry. Thanks very much for the comments. Looking at my options then it seems selling it as it is now is not really of great benefit to me. Even if I got £120 for the lot am I going to get a better modern car for the money? I definately feel the urge to get back into the hobby so do I cut my losses and strip this one down, re-build and add what parts need adding? If the wishbone mounts broke is there anywhere I could get a replacement? I have already looked at the carbon-fibre front and rear shock mounts from fibre-Lyte and they look fantastic so I would buy those straight away. Would I need a slipper clutch if I ran something like this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310 or this http://www.modelsport.co.uk/fusion-exceed-sport-brushless-combo-13.5t/rc-car-products/34302 Thanks again to both of you for taking the time to offer your advice.

keithrc
03-02-2013, 08:34 AM
I use an Ez Run 13T brushless combo in my Lazer ZX, seems to go pretty well and they come with the wires pre soldered to the motor.

http://www.ebay.com.au/itm/HOBBYWING-EZRUN-3000KV-13T-Brushless-Motor-60A-ESC-Speed-Controller-LED-Card-/200821134997?pt=LH_DefaultDomain_0&hash=item2ec1df5695

If you wanted something newer the Lazer ZX-5 RTR's are pretty good for the money, and there's a brushless version.


Keith ;)

Welshy40
03-02-2013, 01:29 PM
Yes Mad Rat wheels are a direct fit and the correct width as per the manufacturers design hence why is my preferred choice. It also looks stunning and the wheels are designed better so are less prone to buckle / bend on impact.

I would recomend buying the Kamtec ZXS shell as it comes with an undertray. At the moment the only avalable under tray is made in Canada and its flimsy and gets damaged far too easily. The Kamtec ZXS shell is a tight fit with a little mod to the servo (buy the servo attachment arms for the B4 so you bolt the servo to that with the extender as well to push further into the chassis and would recommend a kimbrough large servo saver for protection as your daughter will be driving it) the shell will fit. You will need to work out how to cut it as the lines will be for a ZXS and not the ZX/ZXR

Spares, you can buy belts on ebay worldwide from a German company, they are not as good as the originals so you will have to replace more than the originals but still work reasonably well. Chassis, top deck, motor plate, servo plate, L brace, steering plate and shock towers can be bought from fibrelyte in carbon fibre.

Ujs can be bought but will be ZX-5 versions however a couple of pages at the end of the ZXR thread the part numbers are posted there.

Hope this helps.

Welshy40
03-02-2013, 01:33 PM
Hi Terry. Thanks very much for the comments. Looking at my options then it seems selling it as it is now is not really of great benefit to me. Even if I got £120 for the lot am I going to get a better modern car for the money? I definately feel the urge to get back into the hobby so do I cut my losses and strip this one down, re-build and add what parts need adding? If the wishbone mounts broke is there anywhere I could get a replacement? I have already looked at the carbon-fibre front and rear shock mounts from fibre-Lyte and they look fantastic so I would buy those straight away. Would I need a slipper clutch if I ran something like this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310 or this http://www.modelsport.co.uk/fusion-exceed-sport-brushless-combo-13.5t/rc-car-products/34302 Thanks again to both of you for taking the time to offer your advice.

Slipper clutch, hold that thought for at least a month as ive been designing a layshaft for this car, to use the new associated VTS slipper clutch, ive already designed one for the B4 slipper but want to have the option of a tight fit and the possibility to run either slipper clutches so dont buy anything until I have the proto type in my hands and fit and test. When I am happy (hopefully it will be perfect) I will let you know who to buy it from.

The slipper makes the car handle more usable plus can handle the power better.

schmoov3
03-02-2013, 02:40 PM
Hi Welshy. I was hoping you would reply to this thread as I have followed the other lazer threads and you have always been really helpful and knowledgable. Out of the two motor/esc combos I posted earlier in the thread which would be most suitable do you think? I will wait on the slipper clutch until your design is finished. Will it be safe to use brushless as standard for the moment? I will be buying the front and rear shock towers from fibre Lyte when I buy the other bits.

terry.sc
03-02-2013, 02:40 PM
If the wishbone mounts broke is there anywhere I could get a replacement? LA-30 parts come up on ebay every so often, and they can sell for anywhere between £4 and £40 depending on demand at that time. I believe Fibre-Lyte make replacements but really you want to try and find the alloy parts. It's useful to look at Lazers for sale on Ebay, I have bought real dogs of a car because you can see the upgrades in the pictures. A cheap supply of spares as well.Would I need a slipper clutch if I ran something like this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310 or this http://www.modelsport.co.uk/fusion-exceed-sport-brushless-combo-13.5t/rc-car-products/34302 The Lazer can handle that motor no problem. An old school trick to get around the terrible centre diff and lack of slipper is to just remove the balls from the spur gear, wash all the grease off then bolt everything back together. The washers running against the spur gear will grip but still allow it to give under a shock loading. With something as relatively mild as a 10.5T there is no need to upgrade to a proper slipper.

terry.sc
03-02-2013, 02:47 PM
I would recomend buying the Kamtec ZXS shell as it comes with an undertray. The Kamtec ZXS shell is a tight fit with a little mod to the servo (buy the servo attachment arms for the B4 so you bolt the servo to that with the extender as well to push further into the chassis and would recommend a kimbrough large servo saver for protection as your daughter will be driving it) the shell will fit.
Unless Kamtec have modified the ZXS undertray it will not fit the Lazer ZX as the Lazer chassis is wider than the Optima Mid chassis the ZXS undertray came from. As Welshy says, the 'little mod' is that you have to relocate the servo, plus cut back the sides of the chassis plate to get the ZXS undertray to lie flat.

It's so much simpler fitting a ZX or ZX-R body from Team Bluegroove.

schmoov3
03-02-2013, 04:06 PM
Thanks Terry. If i got the ZX repro body from team bluegroove would the parma tomcat shell fit straight onto the under body? Would you say the the lowest motor/esc combo for this transmission would be 10.5t? What sort of runtimes would I get on a 5000mah 2s lipo? Thanks again for all great comments guys.

terry.sc
03-02-2013, 04:57 PM
Thanks Terry. If i got the ZX repro body from team bluegroove would the parma tomcat shell fit straight onto the under body? No, you need the ZX-R undertray for the Tomcat body.Would you say the the lowest motor/esc combo for this transmission would be 10.5t? What sort of runtimes would I get on a 5000mah 2s lipo? Thanks again for all great comments guys.
Considering we used to run 10-12 turn brushed motors in them it will handle a 10.5T easily. If you aren't planning on racing with it you don't need anything faster. Depending on gearing and where and how you are running it you could get up to 20-30 minutes from a 5000mah pack, a lot less runtime if you are running it hard and stopping and starting a lot.

schmoov3
03-02-2013, 05:50 PM
I think i may just get the repro of the original shell to start with. Do you think this combo would be a good choice. http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310

Welshy40
03-02-2013, 06:00 PM
Hi Welshy. I was hoping you would reply to this thread as I have followed the other lazer threads and you have always been really helpful and knowledgable. Out of the two motor/esc combos I posted earlier in the thread which would be most suitable do you think? I will wait on the slipper clutch until your design is finished. Will it be safe to use brushless as standard for the moment? I will be buying the front and rear shock towers from fibre Lyte when I buy the other bits.

Tbh either, as terry suggested is a cheap starting point and does work well so long as you gear it so the motor comes off luke warm.

10.5 and 13.5 are suggested as too much power and the rear belt may snap. My gearbox is a proto and has tensioners to stop this.

Welshy40
03-02-2013, 06:09 PM
Thanks Terry. If i got the ZX repro body from team bluegroove would the parma tomcat shell fit straight onto the under body? Would you say the the lowest motor/esc combo for this transmission would be 10.5t? What sort of runtimes would I get on a 5000mah 2s lipo? Thanks again for all great comments guys.

Youd get 15 mins at least, but thats a guess. Tbh you wouldnt be able to fit any lipos bigger than 4400 as the design of the rear top deck mount means you cant fit the batt wires in to the inner batt for larger powered cells.

I would advise getting three undertrays for the zxr from bluegroove so have spares and the tomcat shell from kamtec. May also be a good idea to buy the associated chassis protector layer that you can cut to shape and stick to the undertray. Still a good idea to reposition the servo with kimbro servo saver, since i came up with the idea ive had a better balanced car and never broken a servo

schmoov3
03-02-2013, 06:19 PM
Which esc/motor combo would you suggest? Don't particulary fancy snapping drive belts! Would it be wiser sticking to a brushed setup instead? Maybe a 19t? Really fancy going brushless though. Is the zxr body/undertay a perfect fit on the ZX with no modifications. Really fancy that tomcat shell with the ZXR undertray.

terry.sc
03-02-2013, 07:55 PM
The ZX and ZX-R use the same chassis, the ZX-R undertray fits exactly on the ZX. As for Team Bluegrooves lexan being fragile, well the first bodies were produced in PETG and would easily split. The latest products by all accounts are using a high quality polycarbonate and now come with overspray film.

For motors my basher ZX-R runs with a 10 turn brushed motor in it. Still running the original 18 year old belts in there and it doesn't just get gentle running. http://www.tamiyaclub.com/tc_userimages/6167/img6167_09032007202719_5.jpg
The reason I use brushed is purely because it's what has been in it for many years and as it's not being raced to goes for ages before needing any maintenance.

For bashing I would probably recommend a 13.5 turn, a bit slower but you will get a lot more runtime from your battery pack, ideal for running for fun and more useful for someone learning.

The Lazer belts might be more susceptible to damage if it's an original due to age, but the belts used in modern cars are exactly the same 3mm type and they can handle brushless no problem.

Welshy40
03-02-2013, 07:59 PM
Which esc/motor combo would you suggest? Don't particulary fancy snapping drive belts! Would it be wiser sticking to a brushed setup instead? Maybe a 19t? Really fancy going brushless though. Is the zxr body/undertay a perfect fit on the ZX with no modifications. Really fancy that tomcat shell with the ZXR undertray.

I would opt for Terrys suggestion of the ezrun and i would opt for a 10.5, which is possibly a 15 single brushed. Gearing im insure but team novak have a ratio chart thats useful to get a ratio starting point and go from there.

I gave kamtec the tomcat shell to copy and the dragon shell is mine, if he still uses it on his site. Thats a perfect fit with zxr undertray from blue groove on your chassis.

schmoov3
03-02-2013, 09:14 PM
Thanks again guys. I think i'm decided on the tomcat body on the zxr underbody. Welshy your shell is still used in the picture on kamtec. Lovely looking shell. One more question regarding the esc/motor. Should i go sensored or unsensored. Was quite keen on this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310

Welshy40
04-02-2013, 06:24 AM
Thanks again guys. I think i'm decided on the tomcat body on the zxr underbody. Welshy your shell is still used in the picture on kamtec. Lovely looking shell. One more question regarding the esc/motor. Should i go sensored or unsensored. Was quite keen on this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310

I use sensored as its a more smoother refined run compared to a rough unsensored esc. If you feel the modelsport one is the way to go then why not. Price isnt that high.

Welshy40
04-02-2013, 08:51 AM
In hitting the Maritime raceway in Kent on 7th April, if you live near then maybe worth popping in.

schmoov3
04-02-2013, 12:11 PM
I live in torbay, devon Welshy but may bring the family up for a day out. Just pricing up everything and its way over my budget. Isn't it always lol! May have to do it in stages. If my speed controller still works I could go with a brushed motor for the time being I suppose. Do you know of any brushless bargains at the moment?

RichieZXR
04-02-2013, 12:28 PM
Speed passion are doing great combos of motor and esc... Modelsport have them as do schumacher its the revention you want to go for ;)

http://www.modelsport.co.uk/speed-passion-reventon-pro-esc-grey-v3.0-10.5r-combo/rc-car-products/371988

I use one and they really are a fantastic unit.

terry.sc
04-02-2013, 01:46 PM
One more question regarding the esc/motor. Should i go sensored or unsensored. Was quite keen on this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310
Any racer will tell you sensored is the only way to go, which if you are on the track is true. But if you aren't racing and you don't need accurate throttle control then you won't really notice the difference and you will find many more non racers happy with sensorless than you will find racers insisting on sensored. I used to race an F1 car with sensorless and had none of these 'rough' control problems sensorless are supposed to have.

After saying that, a sensored system usually gives you more options for tuning, so you can limit the power delivery to help the Lazers drivetrain. This one (http://www.modelsport.co.uk/speed-passion-reventon-stock-club-race-13.5-combo-comp-v3-motor/rc-car-products/370352)is a better one than the Etronix combo for the same price. For £20 more than that Etronix system, you could buy this motor (http://www.giantshark.co.uk/xerun-135t-blue-2500kv-p-407540.html) and this ESC (http://www.giantshark.co.uk/xerun60asd-brushless-competitive-p-405855.html) for a cheap fully programmable sensored system.

Even if your ESC doesn't work, old racers brushed systems go for pennies on ebay. Old top spec race ESCs sell for around £10, and the same for motors. Most of us could probably dig out an old brushed motor if needed to get your daughter started.

schmoov3
04-02-2013, 02:27 PM
Cheers Terry. In the box of bits that i found I came across some of my old motors. A 240st, le mans espirit, demon tweeks and a TMS. Will have to strip them down and see if they work. I think I would still like to go brushless as it will be me using it mostly lol! If I don't go brushless straight away I was thinking of this http://www.modelsport.co.uk/orion-sv2-formula-pro-bb-12x1/rc-car-products/23591 is that a good brushed choice? Am I right in thinking that my old speedmaster silverline can take lipo if I used a lipo voltage alarm?

Welshy40
04-02-2013, 04:40 PM
If you buy brushed the main problem is maintaining the motor. I will have a look and see what I find for you today.

schmoov3
04-02-2013, 04:54 PM
Cheers Welshy. Been having a crafty look at work today. Best deals I have seen are ezrun combos on ebay. About £50 but they're sensorless and fom Hong Kong.

schmoov3
04-02-2013, 06:40 PM
I can get a discount from www.jperkinsdistribution.co.uk but unfortunately all their motor/esc seem to be for aircraft.

Welshy40
04-02-2013, 08:02 PM
Well TBH Richie is spot on and the speed passion is the one to get however it may not fit under the top deck with a fan. Yes it pricey but its good quality. But if you were to be serious that would be the best one to have otherwise get the one you were on about. Go with a 10.5 version of that as it does appear to be the best out there for the money and people have said its good.

Servo wise I would opt for a faster version but would advise buying a kimbrough large (they only do three sizes and the middle version is Large for 1/10th) and use to protect the servo you buy. Get a faster one so ask around on what they would recommend for cheap medium speed servo.

Batts, you cannot really use anything bigger than 4400's in this car and is down to you to decide on whats being used, saddle or stick? Stick you will need to figure out how its going to stay still as with saddles all thats needed is some foam on the batt plates so when attached and clipped in the foam compresses the cells into place.

schmoov3
04-02-2013, 09:16 PM
The speed passion is a bit too pricey for me. I think I'm going to have to do this in stages. This month a complete strip down and rebuild. Clean and lube everything that needs it. Front and rear shock towers from Fibre Lyte. Mad rat wheels and tyres. Parma Tomcat shell with ZX-R undertray. Then next month will be radio gear and electronics. I had another look on www.jperkinsdistribution.co.uk (http://www.jperkinsdistribution.co.uk) and they do the brushless esc/motor combo for the rocket pro on there. With 40% off it would be £60. Part numbers are E014D 90A Brushless ESC and E029 Brushless motor 3600kv. I can't find much info on them so not sure if they are any good. Regarding shock oil what would you recommend for mainly road and light beach running?

RichieZXR
04-02-2013, 10:30 PM
dont run it on the beach you will destroy the car.... pending on dampers I would say 30wt in the front and 40wt in the rear (thats what I ran anyways) if the car is not for racing then I recommend getting one of the turnigy trackstar ESCs from www.hobbyking.com (http://www.hobbyking.com)

schmoov3
04-02-2013, 11:01 PM
Thanks Richie. Funny you should mention Hobbyking. Just looking on their site now. Prices seem too good to be true! http://www.hobbyking.com/hobbyking/store/__29551__Turnigy_TrackStar_120A_Brushless_Short_Co urse_Truck_ESC_UK_Warehouse_.html

Suitable? or http://www.hobbyking.com/hobbyking/store/__29643__Turnigy_Brushless_ESC_35A_CAR_ESC_UK_Ware house_.html

All of the turnigy motors available at the UK warehouse seem to be sensored though and these escs' are sensorless. Are EZ-RUN worth considering?
http://www.hobbyking.com/hobbyking/store/__31781__Hobby_King_Brushless_Car_ESC_100A_w_Rever se_Upgrade_version_UK_Warehouse_.html

and would this motor be safe to use or go with the 12t?
http://www.hobbyking.com/hobbyking/store/__28157__EZ_RUN_Brushless_Motor_9T_4300Kv_UK_Wareh ouse_.html

terry.sc
04-02-2013, 11:03 PM
Cheers Terry. In the box of bits that i found I came across some of my old motors. A 240st, le mans espirit, demon tweeks and a TMS. Will have to strip them down and see if they work. I think I would still like to go brushless as it will be me using it mostly lol! If I don't go brushless straight away I was thinking of this http://www.modelsport.co.uk/orion-sv2-formula-pro-bb-12x1/rc-car-products/23591 is that a good brushed choice? Am I right in thinking that my old speedmaster silverline can take lipo if I used a lipo voltage alarm?
That motor is a good choice, but too much for the Speedmaster. The 19 turn version would be a decent amount of speed and much more battery life. As long as your old motors haven't got a worn out commutator or soft magnets they can all be rebuilt, I still run brushed so still rebuild motors for others.
Any old ESC will work with lipo as long as you don't let the voltage get too low, and a low voltage alarm will work fine with it.


If you buy brushed the main problem is maintaining the motor.Really the problem with brushed was people ragging every last bit of performance out of them. Using softer brushes and backing off the timing and gearing you can get weeks or even months of use before rebuilding. For bashing most are just run until the brushes wear out.

RichieZXR
04-02-2013, 11:06 PM
I got this one for my son who is running a 10.5t sensored motor

http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html

it is programable too... remember the prices are in US dollars so its cheaper again !

remember you can mount it on its side... smaller ones could be mounted on the top deck (where the receiver normally goes) pending on your shell of course..

schmoov3
04-02-2013, 11:29 PM
Unfortunately that isn't in stock at the UK warehouse :( These are the ones that are. Is there anything worth going for out of this lot?

http://www.hobbyking.com/hobbyking/store/__418__182__Speed_Controllers-Car_ESC.html

terry.sc
04-02-2013, 11:41 PM
Thanks Richie. Funny you should mention Hobbyking. Just looking on their site now. Prices seem too good to be true! http://www.hobbyking.com/hobbyking/store/__29551__Turnigy_TrackStar_120A_Brushless_Short_Co urse_Truck_ESC_UK_Warehouse_.html

Suitable? or http://www.hobbyking.com/hobbyking/store/__29643__Turnigy_Brushless_ESC_35A_CAR_ESC_UK_Ware house_.html

All of the turnigy motors available at the UK warehouse seem to be sensored though and these escs' are sensorless. Are EZ-RUN worth considering?
http://www.hobbyking.com/hobbyking/store/__31781__Hobby_King_Brushless_Car_ESC_100A_w_Rever se_Upgrade_version_UK_Warehouse_.html

and would this motor be safe to use or go with the 12t?
http://www.hobbyking.com/hobbyking/store/__28157__EZ_RUN_Brushless_Motor_9T_4300Kv_UK_Wareh ouse_.html
With Hobbyking you are basically buying direct from the manufacturer, so the prices are cheap. I would guess at my club there are more Turnigy lipo packs being used than all the other makes put together.

EZ-Run systems are made by Hobbywing, not Hobbyking, and Hobbywing are one of the worlds biggest brushless ESC manufacturers, making OEM ESCs for several other companies such as Speed Passion and Orion. There are very few racers at my club who are not using one of Hobbywings race ESCs and the cheaper EZ-Run systems are by far the most popular for non racers.


For beach running 30wt oil is a good start, and beach running won't 'destroy' a Lazer. I regularly beach bash many of my old cars and even if you don't rinse off the salt water you will just get some surface rust on steel parts. After many years beach running my Lazer still runs fine with slightly rusty driveshafts.

RichieZXR
04-02-2013, 11:42 PM
I still buy mine from global stock they usually get them to you within a week and on small purchases there is seldom duty to pay ;-)

schmoov3
04-02-2013, 11:58 PM
Thanks Terry and Richie. Much appreciated. I think I would like the sensored setup so http://www.hobbyking.com/hobbyking/store/__23361__Turnigy_TrackStar_10_5T_Sensored_Brushles s_Motor_3250KV.html

would go perfectly with?
http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html

I think I will be getting all my electronics from here. Crazy prices. I wonder what the shipping would be on a £120= order from the global warehouse and if I'd get stung for import tax?

Welshy40
05-02-2013, 06:49 AM
Thanks again guys. I think i'm decided on the tomcat body on the zxr underbody. Welshy your shell is still used in the picture on kamtec. Lovely looking shell. One more question regarding the esc/motor. Should i go sensored or unsensored. Was quite keen on this http://www.modelsport.co.uk/fusion-exceed-race-brushless-combo-10.5t/rc-car-products/34310

Whats wrong this one? Id advise on this as it good value. Zero maintenance means more work on the car.

schmoov3
05-02-2013, 01:45 PM
Which would be the better choice between these two?
http://www.hobbyking.com/hobbyking/store/__23361__Turnigy_TrackStar_10_5T_Sensored_Brushles s_Motor_3250KV.html

http://www.hobbyking.com/hobbyking/store/__21956__Turnigy_TrackStar_10_5T_Sensored_Brushles s_Motor_3730KV.html

I am just compiling a list of parts to complete the build based on all of your helpful advice. I will post it later so you can have a look and give opinions before I order. I had to go with hobbyking for electronics as wouldn't have been able to complete the build otherwise !

Welshy40
05-02-2013, 05:59 PM
Your based in the UK yes. Ok if you want to race with this are these two motors BRCA legal, if yes toss a coin and go with whatever as they both look good.

I would suggest in buying a really good esc first and then getting a 10.5 motor. I do like this esc at the moment. Ok get one with a reverse. I am going for one of the below but doubt you would need one of these

http://www.hpiracing.co.uk/piw.php?partNo=101830

as well as the LRP flow which is listed most places. Unsure which to go with.

schmoov3
05-02-2013, 06:27 PM
I will be getting the esc which goes with these motors. Richie suggested it a few posts back. Will post my full list later and see what you think.

schmoov3
05-02-2013, 08:20 PM
Right Guys. This is a preliminary list of parts for the build. If you could have a look and see what you think. Electronics wise I have gone with Hobbyking to keep costs down.

Electronics

1. Servo : http://www.hobbyking.com/hobbyking/store/__29593__BMS_631_Super_Fast_Servo_5_0kg_10sec_43g_ UK_Warehouse_.html
2. Batteries :
http://www.hobbyking.com/hobbyking/store/__31942__Turnigy_4000mAh_2S_30C_hardcase_pack_ROAR _APPROVED_UK_Warehouse_.html (http://www.hobbyking.com/hobbyking/store/__31942__Turnigy_4000mAh_2S_30C_hardcase_pack_ROAR _APPROVED_UK_Warehouse_.html)
3. Radio :
http://www.hobbyking.com/hobbyking/store/__23165__Turnigy_GTX3_AFHDS_2_4ghz_3_Channel_Radio _System.html
4. ESC :
http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html (http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html)
5. Motor :
http://www.hobbyking.com/hobbyking/store/__23361__Turnigy_TrackStar_10_5T_Sensored_Brushles s_Motor_3250KV.html
6. Programming Card :
http://www.hobbyking.com/hobbyking/store/__29659__Turnigy_TrackStar_ESC_Programing_Card_UK_ Warehouse_.html
7.Charger :
http://www.hobbyking.com/hobbyking/store/__28156__IMAX_B6_AC_Charger_Discharger_1_6_Cells_G ENUINE_UK_Warehouse_.html

Bodywork

1. Shell :
http://www.kamtec.co.uk/index.php?page=shop.product_details&category_id=8&flypage=flypage.tpl&product_id=503&option=com_virtuemart&Itemid=53&vmcchk=1&Itemid=53 (http://www.kamtec.co.uk/index.php?page=shop.product_details&category_id=8&flypage=flypage.tpl&product_id=503&option=com_virtuemart&Itemid=53&vmcchk=1&Itemid=53)
2. Under cowl :
http://www.ebay.co.uk/itm/KYOSHO-LAZER-ZXR-ZX-R-UNDER-COWL-laser-/150681666977?pt=US_Character_Radio_Control_Toys&hash=item231553c5a1

Wheels & Tyres

1. Mad Rat front rim
http://www.modelsport.co.uk/ansmann-racing-front-rim-2-x-mad-rat/rc-car-products/37239
2. Mad Rat rear rim
http://www.modelsport.co.uk/ansmann-racing-rear-rim-2-x-mad-rat/rc-car-products/37240
3. Front Tyres
http://www.modelsport.co.uk/fastrax-1-10-turf-ripper-4wd-front-tyre-t1-compound/rc-car-products/37029
4. Rear Tyres
http://www.modelsport.co.uk/fastrax-1-10-turf-ripper-rear-tyre-t1-compound/rc-car-products/37027

Shock Oil
http://www.modelsport.co.uk/associated-shock-oil-30-wt/rc-car-products/23757

Diff Lube
http://www.modelsport.co.uk/schumacher-silicone-diff-lube/rc-car-products/18466

Fibre-Lyte Mods

Front mount
KYZX03
Rear Mount
KYZX04

Welshy40
05-02-2013, 10:54 PM
Shell, undertray, wheels perfect, unsure on the tires though. Esc looks good but whats the cost? I will go over a bit more tomorrow as im a bit stunned by Oosh123's death so will be more with it tomorrow.

DanB4
06-02-2013, 04:42 AM
Shell, undertray, wheels perfect, unsure on the tires though. Esc looks good but whats the cost? I will go over a bit more tomorrow as im a bit stunned by Oosh123's death so will be more with it tomorrow.

Oosh123's death?? :cry: that's horrible news :(

schmoov3
06-02-2013, 08:59 AM
Esc is £36. Really sorry to hear that sad news.

Welshy40
06-02-2013, 11:00 AM
Commenst listed below against the red wording

Electronics

1. Servo : Looks good
http://www.hobbyking.com/hobbyking/store/__29593__BMS_631_Super_Fast_Servo_5_0kg_10sec_43g_ UK_Warehouse_.html
2. Batteries :
http://www.hobbyking.com/hobbyking/store/__31942__Turnigy_4000mAh_2S_30C_hardcase_pack_ROAR _APPROVED_UK_Warehouse_.html (http://www.hobbyking.com/hobbyking/store/__31942__Turnigy_4000mAh_2S_30C_hardcase_pack_ROAR _APPROVED_UK_Warehouse_.html)
3. Radio : Looks good, you also have sticks avaialable if you prefer
http://www.hobbyking.com/hobbyking/store/__23165__Turnigy_GTX3_AFHDS_2_4ghz_3_Channel_Radio _System.html
4. ESC : For the cost is great, make sure it has reverse and brake
http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html (http://www.hobbyking.com/hobbyking/store/__27211__Turnigy_TrackStar_100A_1_10th_Scale_Senso red_Brushless_Car_ESC_Car_ESC.html)
5. Motor : Yes also looks good
http://www.hobbyking.com/hobbyking/store/__23361__Turnigy_TrackStar_10_5T_Sensored_Brushles s_Motor_3250KV.html
6. Programming Card : Good idea
http://www.hobbyking.com/hobbyking/store/__29659__Turnigy_TrackStar_ESC_Programing_Card_UK_ Warehouse_.html
7.Charger : Ok bit concernd about the comment made about not many been returned, so be careful with this and investigate further
http://www.hobbyking.com/hobbyking/store/__28156__IMAX_B6_AC_Charger_Discharger_1_6_Cells_G ENUINE_UK_Warehouse_.html

Bodywork

1. Shell : Yes good choice
http://www.kamtec.co.uk/index.php?page=shop.product_details&category_id=8&flypage=flypage.tpl&product_id=503&option=com_virtuemart&Itemid=53&vmcchk=1&Itemid=53 (http://www.kamtec.co.uk/index.php?page=shop.product_details&category_id=8&flypage=flypage.tpl&product_id=503&option=com_virtuemart&Itemid=53&vmcchk=1&Itemid=53)
2. Under cowl : Get at least three, and maybe some associated undertray tape, but will do.
http://www.ebay.co.uk/itm/KYOSHO-LAZER-ZXR-ZX-R-UNDER-COWL-laser-/150681666977?pt=US_Character_Radio_Control_Toys&hash=item231553c5a1

Wheels & Tyres

1. Mad Rat front rim - I use these and are good quality
http://www.modelsport.co.uk/ansmann-racing-front-rim-2-x-mad-rat/rc-car-products/37239
2. Mad Rat rear rim - I use these and are good quality
http://www.modelsport.co.uk/ansmann-racing-rear-rim-2-x-mad-rat/rc-car-products/37240
3. Front Tyres - Unsure, check out schumacher tires as I use them
http://www.modelsport.co.uk/fastrax-1-10-turf-ripper-4wd-front-tyre-t1-compound/rc-car-products/37029
4. Rear Tyres - Unsure, check out schumacher tires as I use them
http://www.modelsport.co.uk/fastrax-1-10-turf-ripper-rear-tyre-t1-compound/rc-car-products/37027

Shock Oil - You cant go wrong with this brand, get 40 weight as well
http://www.modelsport.co.uk/associated-shock-oil-30-wt/rc-car-products/23757

Diff Lube - I would opt for Nuclear thrust and diff lube. Links below in my name tag.
http://www.modelsport.co.uk/schumacher-silicone-diff-lube/rc-car-products/18466

Fibre-Lyte Mods

Front mount - best tower for your daughter to drive, it strengthens the front a lot so should save the gearbox
KYZX03
Rear Mount - good choice as well.
KYZX04[/QUOTE]

schmoov3
06-02-2013, 11:33 AM
Cheers for that Welshy. Top bloke. I think I will get two sets of mad rat wheels and use one set for off road and one set for off road. Which schmacher tyres would you recommend for that? I will double check on all the points you listed. Will be ordering bits tonight. Feel like a right big kid at xmas :lol:

Welshy40
06-02-2013, 08:33 PM
Tires for sand I would recommend the full spikes. The blocks I suppose would be good for tarmac but wont be super grippy. Shcumacher used to do onroad wheels for buggies but cant seem to find them and if you can get yellow as green didnt work for me. If you go to team schumacher on google and look on their site they make and sell directly to you.

T650 Full Spike - Rear Tyres - Soft CAT (pr) (£8.50)
T652 Full Spike - Front Tyres - Soft CAT (pr) (£7.99)
T692 Block - Rear Tyres - Blue - CAT (pr) (£8.99)
T693 Block - Front Tyres - Blue - CAT (pr) (£8.50)

I forgot batteries, if you go stick then you may find the car handles a bit back wards so before you buy have a good think about it as you will need to fix it so it doesn't move around on the chassis, left or right. Maybe someone who has done this may have the answer on the ZXR section.

schmoov3
06-02-2013, 11:20 PM
Cheers for that info. The battery that i put in the link is exactly the same dimensions as the nicad that i took out of the car so hopefully should be fine. Had a look on hobbyking earlier and some of the bits I wanted are out of stock at the moment. I'm not too kean on ordering from the international warehouse so will wait until the uk one has them back in stock. Regarding the motor/esc I linked earlier, it is not available from the uk site. I know I would be better off with sensored which that is but would this esc and motor be ok for the time being? would the car cope ok with the power of the 9t motor?
http://www.hobbyking.com/hobbyking/store/__31781__Hobby_King_Brushless_Car_ESC_100A_w_Rever se_Upgrade_version_UK_Warehouse_.html?strSearch=es c%20100
http://www.hobbyking.com/hobbyking/store/__28157__EZ_RUN_Brushless_Motor_9T_4300Kv_UK_Wareh ouse_.html

rondoolaa
06-02-2013, 11:31 PM
I'm not too keen on ordering from the international warehouse so will wait until the uk one has them back in stock.

if they have it in the german ( DE Warhouse ) they are good and fast, i buy from them regularly, choose the cheapest postage if you do as its as quick as the next dearest post,

terry.sc
06-02-2013, 11:34 PM
Right Guys. This is a preliminary list of parts for the build. If you could have a look and see what you think. Electronics wise I have gone with Hobbyking to keep costs down.

...


Most look good. Personally not a fan of dish wheels so would go for the JC Racing 5 spokes myself.

the Turf Rippers are decent tyres, for non racing use I would choose them over Schumachers as the bigger spikes and firmer rubber are a good size for general use. The tyres will need foam inserts, the inserts aren't included with the Turf Ripper tyres. If you want to go for the Turf Rippers I have a spare set of 4 NIP I could sell at £9 posted.

A saddle pack battery might be a better choice, use some stick on wheel balancing weights on the bottom of the saddle lipos and you can use the standard battery holders to hold it in place. Saying that, I do use stick pack lipos in my Lazer, it fits inside no problem but you might have to be a bit creative in fitting it in as they are a bit taller than nimh packs. I run mine pushed against the bulkhead in front of the motor, helps move the weight back in the chassis. It's held in place by the battery straps raised up with some washers between the posts and chassis and some servo tape under the pack to stop it moving forwards.


7.Charger : Ok bit concernd about the comment made about not many been returned, so be careful with this and investigate further
http://www.hobbyking.com/hobbyking/store/__28156__IMAX_B6_AC_Charger_Discharger_1_6_Cells_G ENUINE_UK_Warehouse_.html
It's because most Imax B6 chargers on ebay are cheap because they are copies. It's well documented that while the originals are correctly calibrated and reliable a lot of the cheap clones can overcharge your lipos and aren't known for lasting too long thanks to cheap components used. When you've seen a few it's easy to identify the copies and I've told several club members to get their money back from the seller when they have turned up with a clone.



T650 Full Spike - Rear Tyres - Soft CAT (pr) (£8.50)
T652 Full Spike - Front Tyres - Soft CAT (pr) (£7.99)
T692 Block - Rear Tyres - Blue - CAT (pr) (£8.99)
T693 Block - Front Tyres - Blue - CAT (pr) (£8.50)

All those tyres are for 2 inch wheels as used originally on the ZX. They don't fit 2.2" wheels. The tyres are original CAT tyres.

I run regularly on the beach and while my Optima uses worn Optima full spikes (http://www.tamiyaclub.com/tc_userimages/297/img297_5172004121304_1.jpg)my Lazer and anything newer runs on minispikes. If you want to run full spikes then the ones you want are Schumacher part numbers U6595 and U6596.

schmoov3
07-02-2013, 08:48 AM
Cheers Terry and rondoola. Unfortunately the german hobbyking warehouse doesn't have the motor and esc. I have read some really bad reviews of getting stuff from their international warehouse so will try to stick with the uk or german one. For that reason would these be ok? Sensorless so not ideal. A very good price and its something I could upgrade later on.

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=31781
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28157

Is this charger any good?
http://www.modelsport.co.uk/overlander-lipo-battery-balance-charger-ac-dc-rc-6s-80-watt/rc-car-products/371014

Welshy40
07-02-2013, 01:45 PM
Terry they were on the schumie site and originals wouldnt be listed as soft, also they dont look like 2inch, still full spikes are perfect for sand. Also cant seem to find the treaded road tyres that I usrd to have and use on my lazer on a tarmac track, any ideas?

schmoov3
08-02-2013, 12:06 PM
Just ordered the shock oil and diff lube so will start stripping down the car next week and rebuilding. It will give me a chance to see what condition gear parts and belts are in before I place a big parts order.

Welshy40
11-02-2013, 06:43 AM
Have a look on the zxr thread last page as the stick pack adaptors are up for grabs if interested

terry.sc
11-02-2013, 07:38 PM
Terry they were on the schumie site and originals wouldnt be listed as soft, also they dont look like 2inch, still full spikes are perfect for sand. Also cant seem to find the treaded road tyres that I usrd to have and use on my lazer on a tarmac track, any ideas?
The Schumacher tyres with a three figure number code are the originals, which used to be available first in soft and hard compounds, then in green, blue and yellow compounds. The U650/652 tyres are in yellow compound. I know what size they are as I have a pile of them here for my early Cats, Procats and Mids.

The treaded road tyres were usually Schumacher Road and Track tyres. (http://www.racing-cars.com/sp/category/Product_Category/subcategory/Wheels_Tyres_and_Inserts/templateid/12/searchbox7/1-10_Buggy_On_Road_Tyres.html) All the ones listed are now for 2.2" wheels. if you are happy running rear wheels all round the Venom 88 tyres are probably the best of the lot.

As for beach running tyres, I've come across some large spike tyres (http://www.jcracingproducts.co.uk/user/_images/00eb7e6fb5f34245df4266605437484d/00eb7e6fb5f34245df4266605437484d_X_310_0.jpg) from JC Racing (http://www.jcracingproducts.co.uk/products/), they are tucked away in their 1/10th buggy wheels section.

Welshy40
11-02-2013, 08:19 PM
Terry, apologies yes I found my old Cat tyres and are soft. The Schumie track tyres are superb and I have used them. Unsure why I couldn't find those but nice find and will be buying a set shortly. Cheers..:thumbsup:

schmoov3
15-02-2013, 09:35 AM
Car is all stripped to kit form and every part has been cleaned. Apart from a rusty diff its in fantastic condition. The diff has cleaned up fine and it now buttery smooth. I have ordered most of the parts apart from bodyshell and shock towers which I will get next month. I Managed to tidy up the original bodyshell and under cowl so hopefully will look ok until I get the replacements. I ended up going for the 10t etronix brushless system in the end as it was the best value and came with a programming card. Will start building the car tonight and will post pictures when complete. Thanks to everyone who has taken the time to help me out. Much appreciated.

schmoov3
21-02-2013, 12:25 AM
Car is now finished but I am having trouble with the mad rat front wheels. Any sort of tightening causes binding and when on full steering lock the wheels grind on the hub. Putting washers on has eased it a bit but not greatly. Any ideas? I thought these wheels were a direct fit but when looking at the inner rim the spokes sit much closer to the hub than the original lazer wheels.

terry.sc
22-02-2013, 09:57 PM
Never tried Mad Rat wheels myself, but welshy40 insists it's what he uses. I would just trim back the internal ribs until they clear the wishbones. As they are dish wheels as long as you don't cut the internal ribs out completely they will still add strength to the wheel. The original ZX-R wheels were just plain dish wheels with no internal ribbing.

Of the modern wheels available, personally I prefer the JC Racing 5 spokes as they were designed for the old Lazer.

Welshy40
23-02-2013, 10:47 AM
Car is now finished but I am having trouble with the mad rat front wheels. Any sort of tightening causes binding and when on full steering lock the wheels grind on the hub. Putting washers on has eased it a bit but not greatly. Any ideas? I thought these wheels were a direct fit but when looking at the inner rim the spokes sit much closer to the hub than the original lazer wheels.

As terry says, may be the hexes, bet u the grinding is only when full lock is used. Simple solution as terry says is to cut a tiny section from the wheel inner section, the web area, mind u i dont have any binding on mine at all on my zxr or zxs.

schmoov3
24-02-2013, 01:15 PM
I used a scalpel to trim the inner spokes and all is fine now. Had my first run yesterday and car went really well apart from the 2.4ghz radio gear my nephew had lent me. Got about twenty metres away and lost signal. Just ordered a flysky so should be here tuesday. One thing I did notice is that when on full steering lock and power the lazer front diff makes quite a lot of noise. Is this ok? I put plenty of diff lube in there. I will post some pictures this week. Was great to see it going again.

Welshy40
24-02-2013, 10:37 PM
Unsure but would advise looking at the uj ends to see if the cups rubbing on the uj, its easy to notice, otherwise im unsure why its making noise unless that is the back end is loose and the front wheel is coming off the ground.

schmoov3
09-03-2013, 02:28 AM
A few pics of the Lazer. Getting nearly 30mins runtime per battery so will look at gearing to get more speed. Really impressed with the car though. Goes exactly where you want it to go and is so quiet.

schmoov3
13-03-2013, 04:15 PM
Sorry guys. Had to re-size pictures to get them attached.

schmoov3
13-03-2013, 04:51 PM
Without undertray, wing and bodyshell. Mad rat wheels and turf ripper tyres.

Welshy40
14-03-2013, 06:22 PM
Looks really nice, the wheels do make a difference.

mintzant
14-03-2013, 07:36 PM
In my lazer zxr I use with some modifications FTW associated b4.1 "night fox" xl body...
Super beautiful...

schmoov3
15-03-2013, 09:04 AM
How did you get that to fit?