b4.1 to losi 22?

[racer11]

would the electrics (servo, motor, esc) work and fit ok in a losi22? with the mid motor setup obviously the battery would not but really need to know?:confused:

[buggy#0]

If your talking about the rtr upgrade the servo to a metal geared one, put that one in my sv2 and shredded immediately. I've recommended the alturn aas750mg to everyone its SO cheap for the spec, £18! Apart from that you are ok.

[racer11]

ok, so if i were to put that alturn servo in would it fit with this stubby lipo pack???

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=23134

[buggy#0]

Yes, some people find the 22 a tight squeeze on electrics but everything should go in nice. A few mount their esc or rx on the plate above the motor.

[rollingon4]

+1 on the Alturn servos, I've had an AAS752MG in my cougar for almost a year and its still going strong despite having ripped the front end off the car on a few occasions. Not the fastest servos by a long stretch but great on a budget.

[Robby]

would the electrics (servo, motor, esc) work and fit ok in a losi22? with the mid motor setup obviously the battery would not but really need to know?:confused:

Shouldn't be that big of an issue.
Too many people have 22's for it to have been a problem.

The car's snug, for sure, without the use of sidepods - but I was able to make standard-sized electronics fit in my first 22.