View Full Version : Hupo's TRF501X
Chris
13-07-2008, 09:59 PM
Is tamiya releasing the body that Hupo used at the EC?
And the cvd's?
jimmy
13-07-2008, 10:07 PM
The body is the DB01 Baldre body - you can already buy it seperately and I think DCM on here has bought several for his own fleet of DB01 cars. Once I upload the big gallery you can see it closer and see how he adapted the undertray from the 501X to fit. Not sure if Tamiya will release an alternate undertray for this shell on the 501X but it would be nice.
I think the way Tamiya work is that they send out these development parts to their overseas race team to test - but the real stuff goes on out of sight in Japan. Hupo wasn't sure if the CVD's would be coming or not, he assumed so, but so far I've never heard about their availability.
I think I wrote about the CVD's in the worlds report - so I don't remember their exact reason for this change, but its about performance.
There's rumour of a shaft car and even a 2WD, but still nothing much confirmed.
it isn't a Baldre shell Jimmy, different side pods etc.... it is a new shell.
jimmy
13-07-2008, 10:20 PM
Ah ok, Hupo told me it was a Baldre I think but maybe I got confused somewhere and since I don't have one I didn't realise this, thanks DCM. This must be the shell from the rumoured new shaft car then :thumbsup: There was no undertray and the body was brand new and only cut out at the event so I guess it had only arrived recently from Japan.
Chris
13-07-2008, 10:29 PM
Thanks for the information!
I also noticed different coating on the shocks (same as hotbodies wce shocks).
Jimmy, did you get Hupo's set-up?
Did he use the front or center one way?
I think it is designed to give better clearance to brushless units....
jimmy
13-07-2008, 10:42 PM
When I asked hupo, I assumed it was the Baldre, he said I guess NO it's from the new car - showing how he thought it was for shaft drive. I assumed he meant they made the Baldre shell specially to adapt for the new car (since I still thought it was the baldre and not an entirely new shell) - make of it what you will, I smell a new car coming at some point - can't see it replacing the 501X tho.
TB02 based buggy?? hmm, very interesting, as long as it is better than the DF03....
jimmy
13-07-2008, 10:50 PM
I think Hupo was referring to a possible TRF buggy - but like all Tamiya drivers outside Japan he gets the latest stuff, but not told about it until he gets it.
DaveG28
14-07-2008, 12:03 AM
By not replacing the 501x, do you mean like they do tourers, where you have trf416, and TRF'd ta05's, and then tb Evo's?
If so it'll be a nightmare for me, I'm soo Tamiya's bitch, any new trf I'll have to get!!
DaveG28
14-07-2008, 01:09 AM
Actually, this is probably the best thread for this, what were the ball cups and turnbuckles Hupo was using?
TB02 based buggy?? hmm, very interesting, as long as it is better than the DF03....
Heheh. I'm actually hoping they'd come up with a DF-03 but longer with the weight further back and a bigger wing and better material and more tuning options and ... hmm, you're right, forget it.
jarkkom
14-07-2008, 07:07 PM
I understand the new axles... I've snapped more than enough of rear axles (and belts) this season. I'm going to try HB axles next. Also if the new ones are more robust, their design looks like to handle more droop.
MHeadling
18-07-2008, 06:09 PM
I have a 501 x on the way, just looking at hupo's car, he is using losi main gear,slipper pads and xxx bk2 slipper spring, does any one know the part numbers?
Is this is a bolt on mod?
Also what spares are worth having for it? arms,belts,pulleys?
jimmy
18-07-2008, 07:12 PM
Its the XXX BK2 diff spring he's using not the slipper spring.
Centre pulleys and belts are always a good idea to have around but with very little in the way of support in the UK it's hard to keep everything you might need. shock towers, shock shafts - things like that seem to suffer in crashes. The suspension arms are generally pretty tough, I've done a couple of rear but never a front.
kenooze
21-07-2008, 03:29 PM
Hi Guy's, abiut the set-up used by Hupo, that's looks to be the same than in Finland, excepted harder oil and blue sway bar in front and rear !
About the slipper, Hupo used machined Losi slipper plate (Prototypes from Optimized) and losi slipper pad with 86 kevlar spur gear !
About shock coating, Hupo looks surprise about the color, no more informations !
If you have more questions :p
Chris
22-07-2008, 02:00 PM
Did he run a 6,5 LRP? sintered or bonded?
Did he use a front diff or one way?
jimmy
22-07-2008, 02:10 PM
As Reto from LRP (who was sat next to Hupo) said - "no one runs bonded any more - do they?" so sintered it was.
He ran a diff up front.
MHeadling
22-07-2008, 02:52 PM
Duev are optimized going to brining out the slipper pads, or do a whole conversion to use losi main gear/slipper?
Why does Hupo do this? is the 501 slipper not very good?
stefke
22-07-2008, 02:55 PM
If I look at the pictures from Hupo's car : was he running prototype rear hubs with 0.5° extra toe in ?
He has marked them as "0.5R" and "0.5L"
jimmy
22-07-2008, 02:59 PM
The Losi slipper pads and spur fit on the B4 - the B4 stuff fits on the 501X, so I would guess the Losi things fit on the 501X with no modifications. I'm not sure what the slipper plates are all about but I'm sure Cedric will spill the beans! :drool:
The 501X slipper is great :thumbsup:
MHeadling
22-07-2008, 03:26 PM
Just had a look at Hupos car, what blue turn buckles are they? are they associated ones? if any one knows what ones to use or part numbers that would be great!
I have swapped my BJ4WE for a 501 hence me posting in tamiya section!
oh and i love blue bits!!:thumbsup:
Welshy40
22-07-2008, 07:57 PM
Blue bling - yup its addictive isnt it.
Just had a look at Hupos car, what blue turn buckles are they? are they associated ones? if any one knows what ones to use or part numbers that would be great!
I have swapped my BJ4WE for a 501 hence me posting in tamiya section!
oh and i love blue bits!!:thumbsup:
MHeadling
22-07-2008, 09:44 PM
whilst on the subject, hope someone comes up with answer for the turnbuckles (i.e I want some blue ones) but my question is, do the J concepts white ball joints fit the tamiya ball joints and turnbuckles?
jarkkom
23-07-2008, 08:43 AM
whilst on the subject, hope someone comes up with answer for the turnbuckles (i.e I want some blue ones) but my question is, do the J concepts white ball joints fit the tamiya ball joints and turnbuckles?
Yes they look like AE/Lunsford turnbuckles. If you want to use JConcepts ball cups you need to have smaller ball studs. A set of Hot Bodies studs is what I did. Part numbers are HB-61581 and HB-61582.
Just remember that AE blue and tamiya blue are different, if you mix them it may look cack. (not used that word for ages)
My guess is that Hupo got Cedric from Optimised rc to anodise them in tamiya blue ;)
kentech
23-07-2008, 09:58 AM
The blue turnbuckles are more than likely from the new TRF blue titanium turnbuckle series.
These should have been released last month by Tamiya but has been delayed 'til August.
We should have these in stock once they're available from Tamiya. Sorry...shameless plug! :p
RC Wrench for Blue Titanium - Turnbuckle Shaft
Item #42122 (COMING SOON)
RC 3x45mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42121 (COMING SOON)
RC 3x42mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42120 (COMING SOON)
RC 3x38mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42119 (COMING SOON)
RC 3x32mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42118 (COMING SOON)
RC 3x23mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42117 (COMING SOON)
RC 3x10mm Blue Titanium - Turnbuckle Shaft (2 pcs)
Item #42116 (COMING SOON)
http://www.tamiyausa.com/product/category.php?sub-id=72000&page=51
MHeadling
23-07-2008, 02:18 PM
thanks for the replys guys, i have gone with hb ball joints, j concepts white ball links and lunsford turn buckles, that should do it!
yes i know what you mean about tamiya blue and associated blue, cack! good word!
jarkkom
23-07-2008, 06:59 PM
The blue turnbuckles are more than likely from the new TRF blue titanium turnbuckle series.
Wow, I need these...
kenooze
24-07-2008, 12:14 PM
The new TRF light blue turnbuckles was Lunsford product !
The 0.5 rear hubs was prototypes from TRF, but you could use Rayspeed 0.5 hubs for yokomo car, they are available but may-be difficult to find !
Hupo use 6.5 motor with 23 tooth pinion and 86 tooth spur gear ! (around 8.5 gear ratio :drool:)
The slipper plate from the Losi looks to fit a bigger diameter than the original TRF and fit perfectly the Losi pad ;)
stefke
24-07-2008, 12:21 PM
The new TRF light blue turnbuckles was Lunsford product !
The 0.5 rear hubs was prototypes from TRF, but you could use Rayspeed 0.5 hubs for yokomo car, they are available but may-be difficult to find !
Hupo use 6.5 motor with 23 tooth pinion and 86 tooth spur gear ! (around 8.5 gear ratio :drool:)
The slipper plate from the Losi looks to fit a bigger diameter than the original TRF and fit perfectly the Losi pad ;)
Thanks mate.
I would REALLY like those hubs to use on some low traction tracks here. As you said : the Yok hubs aren't easy to find.
23/86 on a 6.5 !!!!!!!!! THAT'S INSANE !! :confused::confused:
I would fry everthing using that gearing.
Depending of the brand, brushless motors can be very different gearing-wise, although the winds are the same.
That's why it's not very useful to ask, say, 'gearing for a 6.5' if you don't give the brand, rotor size, sintered or not, etc.
When I first tried a brushless motor (Orion 6.5 with 13mm rotor), I used the conservative recommended gearing. It was so slow!:bored: It's only when I geared it with 4 more teeth on the pinion :wtf: that it came to life.
mole2k
26-07-2008, 05:15 PM
Has anybody tried Hupo's wishbone mod to add flex, would this mod work for indoors on polished wood to help increase the level of grip with more flex?
I have to admit chassis flex is not something I particularily understand, I've also been looking at the Team Azarashi top decks which are also designed to increase the flex.
Can anybody shed any further light on this subject ?
minimini
26-07-2008, 05:41 PM
I think Hupo's shell is more alike a HB D4 shell with a bit of modifications at the rear part......... get rid of all the shark fins .......
stefke
28-07-2008, 03:05 PM
Has anybody tried Hupo's wishbone mod to add flex, would this mod work for indoors on polished wood to help increase the level of grip with more flex?
You can also use the DB01 plastic arms.
TRF_AK
04-08-2008, 04:21 PM
Can someone please point me in the direction of the pictures of Hupo's 501x being discussed?
jimmy
04-08-2008, 04:30 PM
http://www.oople.com/rc/photos/euros2008/day5/ (http://www.oople.com/forums/../rc/photos/euros2008/day5/)
some small ones in the report, and larger ones at the bottom of the page in the gallery.
The arm mod was done before the plastic arms were available - so if you want to try it, I'd guess the plastic DB01 arms are a similar effect.
N7ELA
06-08-2008, 07:01 PM
do my eyes decieve me or is hupo running a brushless without a power cap...???
stefke
06-08-2008, 07:55 PM
do my eyes decieve me or is hupo running a brushless without a power cap...???
take a good look under the wires. ;)
MHeadling
13-08-2008, 01:16 PM
I need a new shell for my 501, has any one found what shell Hupo was running?
jimmy
13-08-2008, 02:53 PM
Something new not out yet, that's all I know. Not sure if it's a new shell for the 501X or a new shell for a new car yet.
DaveG28
29-08-2008, 11:00 AM
Does Hupo use the arm modification just on the front, or front and rear?
fabolousRC
31-08-2008, 11:19 AM
Something new not out yet, that's all I know. Not sure if it's a new shell for the 501X or a new shell for a new car yet.
I saw the pics.
I think Hupo is running a version of the J concept body or Tamiya version of J Concept body. The person who is running the Baldre body is Cedric.
If Tamiya ever consider making a shaft driven 501x class buggy is because the BJ4x4/B44 are so successful plus Tamiya has history with shaft driven cars so transitioning from one to another is not so drastic (compared to from TB EVOII to 414M/M2 with TA03 as the excuse :thumbsup:).
DaveG28
08-09-2008, 07:38 PM
Hi Jimmy,
Was it yellow or flourescent yellow kyosho springs hupo uses?
sosidge
08-09-2008, 07:45 PM
Hi Jimmy,
Was it yellow or flourescent yellow kyosho springs hupo uses?
Pretty sure it is the normal yellows, #65, and I think he also cuts them down!
Chris
12-10-2008, 03:17 PM
Hupo wasn't sure if the CVD's would be coming or not, he assumed so, but so far I've never heard about their availability.
I think I wrote about the CVD's in the worlds report - so I don't remember their exact reason for this change, but its about performance.
OP.1118 DB01 Assembly WO Universal Shaft (Front)
OP.1119 DB01 Assembly WO Universal Shaft (Rear)
The new CVD's?
Chris
12-10-2008, 03:22 PM
About shock coating, Hupo looks surprise about the color, no more informations !
42132 エアレーションダンパー用 HLシリンダー(フロント2本)
42133 エアレーションダンパー用HLシリンダー(リヤ2本)
The new shock bodies
Freeride
14-11-2008, 09:25 AM
Something new not out yet, that's all I know. Not sure if it's a new shell for the 501X or a new shell for a new car yet.
Hi. So the Baldre shell will fit the 501x and line up with the under tray with a little modification? Like Cedric's? Our LHS only has the Bladre in stock and I'm in a bit of a hurry getting a new shell ;) Thanks!
DaveG28
20-11-2008, 01:23 AM
OP.1118 DB01 Assembly WO Universal Shaft (Front)
OP.1119 DB01 Assembly WO Universal Shaft (Rear)
The new CVD's?
Yep :thumbsup:
According to Tam USA, the improvement is because they work more efficiently at a wider range of suspension angles.
You need to use different front steering uprights (included in the pack), so to carry spare front uprights also buy 54131!
Dave
chokoboy
23-01-2009, 04:01 PM
The new TRF light blue turnbuckles was Lunsford product !
The 0.5 rear hubs was prototypes from TRF, but you could use Rayspeed 0.5 hubs for yokomo car, they are available but may-be difficult to find !
Hupo use 6.5 motor with 23 tooth pinion and 86 tooth spur gear ! (around 8.5 gear ratio :drool:)
The slipper plate from the Losi looks to fit a bigger diameter than the original TRF and fit perfectly the Losi pad ;)
I've been looking for the Rayspeed 0,5 rear hubs for yokomo to fit my 501x but the only one i can find is the Rayspeed 0,5 rear b4 hub rayspeed rs-28. Is this the right part Deuv are talking about?
Thanks
Dennis
knighthawk
23-01-2009, 05:43 PM
There's rumour of a 2WD, but still nothing much confirmed.
jimmy,
is there any new news on this?
was thinking of getting the old Dyna Storm as I want to run a Tamiya 2WD, but if there's any news on a New TRF 2WD then i'm going to have to wait.
Cheers
Dez
B44&501xRacerEX
25-01-2009, 04:11 AM
I'll probably end up getting the new hotbodies 2wd D2, and run it until tamiya makes one, anyone else think that 2wd looks cool?
All I know is the 501x is one tough car, raced it for the first time last weekend and didnt break anything but the wing. It's one balllistic beast with that tekin 3T motor I chose. I was able to clear the tripple many times.
It so fast my steering servo cant keep up with it...lol. Probably just needs adjustment.
Steering EPA or whatever. I had a little too much toe in also, so I'll need to fix that also.
40wt oil in front, 35WT in rear seemed about right.
I'll probably look into Hupo's setup, to get the car more dialed in.
hypnolobster
25-01-2009, 05:44 AM
I was just about to buy an XXX-CR to take care of my nagging lust for a 2WD buggy, but now I'm just a little too curious to buy one just yet..
qatmix
25-01-2009, 08:38 AM
has anyone been following the redesigned Dynastorm thread on Tamiyaclub? Some engineers have been creating a really tasty looking conversion kit for the car alot like the Trf202x prototypes.
MotoRev
25-01-2009, 10:58 AM
has anyone been following the redesigned Dynastorm thread on Tamiyaclub? Some engineers have been creating a really tasty looking conversion kit for the car alot like the Trf202x prototypes.
Linky??:)
knighthawk
25-01-2009, 11:11 AM
has anyone been following the redesigned Dynastorm thread on Tamiyaclub? Some engineers have been creating a really tasty looking conversion kit for the car alot like the Trf202x prototypes.
Can you point me in the right direction as I can't find this thread?
Cheers
Chris Ward
25-01-2009, 01:19 PM
Can you point me in the right direction as I can't find this thread?
Cheers
http://www.tamiyaclub.com/forum/index.php?showtopic=42222&hl
knighthawk
25-01-2009, 01:39 PM
http://www.tamiyaclub.com/forum/index.php?showtopic=42222&hl
This is really a thread on a guy redesigning and strengthening parts already made!
This there a thread or pics on the TRF202X ????
qatmix
25-01-2009, 04:36 PM
not quite, the guy is taking the weaknesses and updating the car to make it competitive. Its not any different to what 'real' manufacturers do when they upgrade their cars. He is also redesigning the layout etc.
As to the TRF car, its quite old (The dynastorm was the production version of this car) here is a link
http://www.rcfan.net/trf211x/index.html
it was the 211 and 212 .
knighthawk
25-01-2009, 06:14 PM
not quite, the guy is taking the weaknesses and updating the car to make it competitive. Its not any different to what 'real' manufacturers do when they upgrade their cars. He is also redesigning the layout etc.
As to the TRF car, its quite old (The dynastorm was the production version of this car) here is a link
http://www.rcfan.net/trf211x/index.html
it was the 211 and 212 .
Sorry for the comment,
I thought that we were going somewhere else with it!
As for the TRF212X, I must have been on the moon at this time, was unaware that the Dyna Storm became the production kit!
Many thanks for filling in the blanks.
qatmix
25-01-2009, 08:29 PM
no offence taken mate. There are rumours of a new tamiya trf2wd, but I dont know if it will ever appear.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.