PDA

View Full Version : k1 steering problem or is it?


Martin Wallace
03-03-2013, 04:23 PM
hi guys,

kit built from new the front 10 deg castors were fitted from the kit, i purchased the alloy 7.5 yokes, fitted them, problem is, now the car seems to have mega lock and when its on full lock the arms jam in and i cant turn the steering back. cant pull it even with my hand on the servo arm (currently no servo fitted)

was ok with the standard plastic ones.

why is it so tight. has anyone else came across this.your thoughts please thanks.

mark christopher
03-03-2013, 04:35 PM
make 100% sure there fitted correctly can you post a pic?

reelman_fishing
03-03-2013, 05:42 PM
Some one had the same thing at srcc. I believe it was the steering arm on the wrong way round.

adamjimny
03-03-2013, 05:43 PM
you have the rh yoke on the left and vise versa.....swap them over

cryer-evo
03-03-2013, 07:20 PM
I did this put the new yokes on the wrong side just swop them over

Martin Wallace
03-03-2013, 08:38 PM
you have the rh yoke on the left and vise versa.....swap them over


yup, school boy error adam, had put them on the wrong way. it was around 01.35am so ill blame tiredness lol.:lol:

thanks for the replays guys.

martin

TARTMAN
03-03-2013, 11:18 PM
i did same with kit yokes. and wondered why i had bump steer from hell!!!!!

again, late at night. we must stop building cars at night.:p

jimmy
03-03-2013, 11:39 PM
I built mine until 11:30am the next day!!!! :woot:

Needless to say my first outing was terrible. Not because I built the car wrongly but because I was so tired.