PDA

View Full Version : Kyosho half 8 Inferno.


keithrc
04-03-2013, 11:17 AM
Hey all, I've got a Kyosho half 8 09 Inferno with the nitro engine, I've only run it twice since I bought it in '08 but I was thinking of an electric conversion. In hindsight I should've bought the electric one to start with.

Looking on here there doesn't seem to be much talk about them lately, have they fallen out of favour for some reason? I checked on ebay and couldn't see a current version available.

Am I better off to just buy a different brand? I've only ever had Tamiya and Kyosho RC cars so I'm not very familiar with other brands.


Keith ;)

Neil Skull
04-03-2013, 11:47 AM
Hi Keith,
It would be easier and probably cheaper to buy a mini-inferno EP.
I Don't know if any shops have stock but we have in the warehouse the ST Plus truggy on Special offer. You can order from your fav modelshop.

http://www.kyosho.com/eng/products/rc/detail.html?product_id=100257

keithrc
05-03-2013, 09:04 AM
Thanks for the link, I'm not into ST's but I'm guessing it could be converted into my buggy? How much does it sell for?

I wonder if Kyosho have plans of bringing out an updated version sometime in the future?


Keith ;)

Karting
05-03-2013, 09:33 AM
Thanks for the link, I'm not into ST's but I'm guessing it could be converted into my buggy? How much does it sell for?

I wonder if Kyosho have plans of bringing out an updated version sometime in the future?


Keith ;)

There were talks of them releasing one at the end of last year, BUT then i heard nothing else of it so its either been delayed or they have changed their minds?

keithrc
06-03-2013, 05:33 AM
Would this be the one you were thinking of? I only found this one this morning.

http://www.ebay.com.au/itm/190789318668?_trksid=p5197.c0.m619

I've emailed the seller to get a shipping quote.


Keith ;)

keithrc
06-03-2013, 08:09 PM
I got a reply from the ebay seller saying they don't post out of the UK, when I asked why I was sent a link to a website where I was able to order one.

http://www.conrad.com/ce/en/product/238729/Kyosho-electric-buggy-model-car-Mini-Inferno-4WD-RtR-27-MHz


Keith ;)

Jordy
06-03-2013, 09:21 PM
Keith, Save yourself a lot of hassle and spend your money on something else.

Mini 8, Carisma or the new micros from Schumacher would be my advice.

If you're having trouble finding a Inferno, then imagine what it's going to be like to get hold of spares........near impossible!! If you can order spares through a Kyosho dealer then it could take between 1 week to infinity to get! Time that you won't be able to race or bash. Trust me....I've had one and it was sold on eBay for spares because I couldn't get any!

All the spares for the models I listed are available at many good modelshops and are well supported.

keithrc
13-03-2013, 09:29 AM
I've arlready ordered the one in the above link, if finding parts becomes an issue I'll look into something else.

As mentioned above I have the nitro version of the Mini Inferno, I'm trying to get hold of a replacement battery (part No. ky71650 (or kyo?)) but no-one seems to stock them anymore.

Is there some kind of alternative battery that other nitro 1/18 buggies use that'll fit the 09 Inferno? Maybe the cells can be bought separately and I can make my own pack?

Neil Skull
13-03-2013, 09:33 AM
You will have to make a pack up! I am afraid we cant get those rx packs any more.

keithrc
13-03-2013, 11:12 AM
OK, no-one else makes the same size batteries? Where would I find the right cells and connector tabs to make one up?


Keith ;)

Neil Skull
13-03-2013, 12:25 PM
Perkins do quite a good range of RX packs.
Sure one will be right size!
http://www.jperkinsdistribution.co.uk/list.php?subcat=47&cat=EnErG-Pro

keithrc
15-03-2013, 11:01 PM
Double post.

keithrc
16-03-2013, 07:20 AM
Thanks for the link but it doesn't look like any of those will be suitable. The closest I could see was 50x29x32mm in size, the pack I need should be 30x35x25mm. It's a very snug fit in box with the reciever.

The idividual cells are the same diameter as a standard AAA battery but just over half the length.


Keith ;)
http://www.oople.com/forums/images/buttons/edit.gif (http://www.oople.com/forums/editpost.php?do=editpost&p=756534)

keithrc
20-03-2013, 07:00 AM
Anyone?

Maybe I could use a different battery/reciever configuration and use a slightly bigger battery? Not that there's much room to play with. Can the servo's work with a different voltage battery?


Keith ;)

Neil Skull
20-03-2013, 04:37 PM
4.8 volt is ok but 6 is best.
You can buy the smaller batteries loose to make up there is a guy on e-bay I used to use.
http://stores.ebay.co.uk/Component-Shop/Receiver-Battery-Packs-/_i.html?_fsub=204077019&_sid=68173889&_trksid=p4634.c0.m322