HW Xtreme / Turnigy221.5t combo

[Simion Wabs]

As title, I have fitted a HW Xtreme stock in my SSS with a 21.5 turn Turnigy 21.5t motor. This issue I have is that when the sensor wire is attached the motor does not operate and just vibrates very fast. When I remove the sensor wire, the combo works fine. Do I need a new sensor wire or is this combo incompatible?
Advice please

[RudolfXC]

Are your motor wires in the correct order?

[Simion Wabs]

I have swapped 2 phases to make the motor run forward correctly. I'll swap two others to see if that works. Cheers

[Simion Wabs]

Sorted. After swapping various phases all works well.
:thumbsup: