View Full Version : Big bore piston what way up ?
cryer-evo
08-04-2013, 11:01 AM
Hi all I have a cat sx3 and would like to no the best way to put my pistons in they are tapered ones I won't fast compreshion but slow rebound so wot way should I have the pistons tapper facing up our down ?
Andrew Twigger
08-04-2013, 11:11 AM
The typical way to run a taper piston is so that the compression is normal speed, but the rebound is quicker - thus enabling the car to settle more quickly between bumps and after landings. Therefore the 'tapered' side of the piston would want to point downwards - into the shock body.
Chrislong
08-04-2013, 11:46 AM
I wan't fast compreshion but slow rebound
That is back to front :D. You need normal damping on compression, and fast rebound - the faster a shock recovers = the faster it is ready for the next bump.
spud31
08-04-2013, 01:00 PM
Yokomo runs the front pistons taper up seems to work
cryer-evo
08-04-2013, 01:19 PM
Yes the yokomo dose and it works very well I have set my cat up the same as I have a bmx2 mr but I wasn't shoure on what way dose wot . my thinking was that if the shock can compres fast but rebound slower it can sock up the bumps and not spring back and make the car bounce
spud31
08-04-2013, 03:56 PM
i found on high grip it made the cat unstable under braking tho
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.