PDA

View Full Version : K1 LACK OF STEERING


rapidrubberwill
13-05-2013, 11:06 AM
first run out with my k1 this weekend and it feels like it has a lack of steering, i went from a sx2 to the k1 and its better in every way just needs a wider turning circle or feels that way.my sx2 was very quick to turn and this feels lazy.
i am running the same servo and had the speed turned down on my spektrum on the sx 2 and its all the way up on the k1. i also run the ally blocks and went from the 7.5d front block sx 2 to the 10d front block k1 could this have somthing to do with it or is this how they are.

robstanway
13-05-2013, 12:23 PM
7.5 degree blocks will give you more initial steering, put them back on and go from there.

Rob

rapidrubberwill
13-05-2013, 12:41 PM
i have just been reading and the 7.5 give more initial turn and the kit comes with plastic 10deg so i will give that a try

cutting42
13-05-2013, 01:19 PM
That's interesting, my sons SX2 is too twitchy for him and came with 7.5 deg blocks. So from this it sounds like switching to 10.5 deg will calm it down a bit.

mw02veg
13-05-2013, 01:22 PM
Add 2mm behind the ball stud on the steering rack.

cutting42
13-05-2013, 04:02 PM
Add 2mm behind the ball stud on the steering rack.

Cool, will give that a go.
Thanks