Setups for B4FT and B44 Worksop Indoor Series

[Rich D]

Hi Guys

Can anyone post up some useable setups for the forthcoming Schumacher Indoor Series at Worksop please ?

So far i have got :-

Trakpower lipo 6.5R for my B44 :)
Trakpower lipo 7.5L for my B4FT :)

Yellow minipins for both cars f/r but :-

Part number for B4 Yellow Mini Pin fronts ?
Insert type ?
Gearing ??



Im pretty much stuck and don't want to waste the whole of the first round experimenting trying to set my cars up. All help to a good starting point is greatly appreciated

:thumbsup:

Rich

[Rich D]

Anyone ? :confused:

[cjm_2008]

you'll deffo need additional weight for the lipo in the b44 - quite a bit of it, or you'll be nosediving off the jumps.

my indoor setup is no different to my dry grass setup - 40 wt front, 30 wt rear, silver springs, -2 degrees... job done.

[Rich D]

Cheers for the info bud i have got the lead weight for both cars too from Frogger on here :thumbsup: - forgot to mention that.

Info i need is :-

Pinion/Spur sizes
Insert type
camber
ride height
castor blocks
spring types
oil types
piston sizes

For both cars.

Thanks guys :thumbsup:

[James]

Well you can have my setup, i was 4th in th series last year and highest B4, obviously not as quick as cragg and co but it should be a good starting point:

22/78 6.5 sintered lrp/nosram
schumacher hard insert, cut down.. although most run medium
1-2 neg camber
wishbones level
silver spring f an r front 35 #2 rear 30 #1
lead under lipo
big wing
front shocks - middle top, inside bottom
rear middle top, insode bottom

that should do you.

[Rich D]

Hi James

Many thanks thats just what im after you are a gent :)

Look forward to meeting some of you guys there :thumbsup:

Can i assume that you are using the std castor blocks on the B4 ?

Thanks again

[James]

Been using standard ...

[Rich D]

Been using standard ...

Thanks again James thats the B4FT dealt with.

Can anyone add anything further for the B44 please ? :confused:

[col300]

Thanks again James thats the B4FT dealt with.

Can anyone add anything further for the B44 please ? :confused:

i'm going to be running same as York indoor


front
40wt
blue spring
inside top / outside bottom
22mm ride height
front diff

rear
30wt
silver spring
inside top and bottom
silver anti-roll bar
20mm ride height

rest as kit setup and will probably try the one-way in the later rounds.

[Rich D]

Cheers col :thumbsup:

[James]

search the jconcepts thread and base i around rich lowes bury dry starting setup, thats not far off..