b44 chassis swap for 44.1

[nedssx]

Hi guys. Is it possible to just swap the chassis on my b44 for the one from the B44.1. is it just a straight swap or is anything else required?

[cutting42]

Not sure how much help this will be but this was the list of what was changed from the B44 to the B44.1. I think the motor mount changed as well but don't know if the mounting to the chassis was different.


2.5mm updated carbon fiber chassis for LiPo batteries only (no cell slots) #9774

Carbon fiber LiPo battery tray with removable center section (*optional ballast weight req'd) #9775

3.5 mm thick front shock tower (from 3mm) #9703

Updated front top deck for more durability along with new antenna location #9701

Cam motor mount set #9800

Factory Team 0 degree aluminum rear hubs #9864

Factory Team V2 dual-cap hard anodized shock bodies with threaded collars Fronts: #7475, Rears: #7478
V2 slipper assembly with high-rate spring #7485, 7486, 9736

Factory Team Gold slipper pads #9603

Rear anti-roll bar included #9708

Bleed-screw shock caps #6443

Carbon-fiber battery straps #9786

Servo mounted 3mm closer to centerline

Chassis cut for additional ground clearance

Spur gear changed from 84 to 81 #9651

[peetbee]

I'm pretty sure it's a straight swap, I know the .1 motor mount fits the .0 chassis.

[KRob]

Yep, chassis itself will be a straight swap.
But you will need a battery tray of some sort (and the spacer that goes between the cells) as the original plastic tray for sub-c won't fit.

[nedssx]

Cheers. I've got the lipo trays and spacer on my b44. Just wanted to know if the chassis was a straight swap before a ordered one

[gazhillAE]

Cheers. I've got the lipo trays and spacer on my b44. Just wanted to know if the chassis was a straight swap before a ordered one

Yes straight swap there the same length and all screws are in the same places so don't worry boss

[nedssx]

chassis has arrived and swapped over already only took about an hour