Speed Passion GT 2.0 ESC Cooling Fan Replacement

[Cremegg]

Ok

So the fan has yet again broke and I'm finishing it very difficult to solder the wires back on (as the fan keeps popping out of the casing)

Is there a cheaper alternative fan available? Would a hobbywing one be the same? Or a computer graphics card fan too?

Thanks

[OneKiwi]

There are heaps of fans available that will fit.
SP have a 25x25 fan, just get one with the same connector (saves soldering )

Have a look on ebay or your LHS for them

[Cremegg]

Thanks for that

Does the voltage of the fan matter?

[Gregerl]

Thanks for that

Does the voltage of the fan matter?

Yes it does. I don't know for sure but I think all esc fans originally are 5V fans. A 12V fan turns far too slowly when powered from most ESCs or directly from the 2S lipo. Trust me on the last point, I've tried it.

[Cremegg]

Ok thanks

So would it be better to get a 5v fan and not a 12v fan

The only reason I ask is because somewhere on the instructions for the esc, I'm sure it says 12v, and if that's the case the the sp fan is 12v its quite fast