New 4wd for WORLDS ;-)

[stegger]

There will be a NEW 4wd coming for the Worlds this year ;-) According to Miguel MATIAS while being interviewed after his C final run at the Euro's.

[paulj]

The funniest part was the reason for him slowing down on the last lap to give away the win in the C final, he was miles ahead then drove like he was dumping on the last two corners and finally shot across the line after letting second place through.

He wanted to go home and didn't want to wait for a trophy at the presentation!

[stegger]

The funniest part was the reason for him slowing down on the last lap to give away the win in the C final, he was miles ahead then drove like he was dumping on the last two corners and finally shot across the line after letting second place through.

He wanted to go home and didn't want to wait for a trophy at the presentation!

Yeh funny :lol:


c-c0ZJ0xgk4

Check out Miguel MATIAS interview 6:56:00 in on this video.

[Origineelreclamebord]

I'm really curious what caused these rumours... :)

[Frecklychimp]

Miguel stated on rostrum he would attend Worlds IF he gets the new car...

is still rumour really as anything in pipeline may get delayed but it's sounds promising and well overdue.

He was running a XXX4 on what looked like a very bumpy track so maybe XX4 would have been more suited and Bloomers still performed well with his XX4 despite some bad luck in qualifying.

Fingers crossed for a new car soon :thumbsup:

[Flauschi215]

that there will be a new 4wd buggy has confirmed a team driver from hamburg germany;) I'm very excited

[Dr Fly]

So IF there is a new car for the worlds, when do ppl think it will be available for the rest of us, I used to drive a xx4 many moons ago, then packed it in. And came back to racing a few months ago with a 22.

Will it be released after the worlds in time for xmas, or does the rules say it has to be for same to be eligible to run, like tyres?

[nicmo]

It doesnt have to come out before/during the Worlds for them to run it in the modified class, you can run whatever prototype you like.

To be honest Miguel didnt say a new car is coming out, only that he only wants to race in the Worlds if there is one and he gets it in time.

[Holeshot]

Not going to get excited, been hoping for a new 4wd for 8 years.

[Robby]

Here's a few pics you chaps can drool over. :drool:

[MikePimlott]

Yey :thumbsup:

[Kash]

Belt drive with the motor up front like a xx4?

[mikeyscott]

Sold my 2WD cars, looks like I'll be selling my 4WD too.

Was winding down racing, but this... Might keep me racing over winter if it landed after worlds.

So far it's looking like a new:
HB
Kyosho
TLR

Plenty of choice

[bender]

Seems clear from those pics that theyve tried to keep as much of the old XX-4 in the design as they could.

Quick glance reveals it to be 3 belt system with the motor pretty much in the same spot as the XX-4, saddle packs in the back, esc in the same spot, essentially XX-4 front geometry.

Nice to see how theyve resolved the XX-4 front bulkhead issues, having the arm mounting block mounted under the alloy chassis (like the 22). Judging from the angle of the chassis in relation to the outdrives i'd say theres a cut-out or hole in the front of the chassis that the front pulley sits into.

[Robby]

Seems clear from those pics that theyve tried to keep as much of the old XX-4 in the design as they could.

Quick glance reveals it to be 3 belt system with the motor pretty much in the same spot as the XX-4, saddle packs in the back, esc in the same spot, essentially XX-4 front geometry.

Nice to see how theyve resolved the XX-4 front bulkhead issues, having the arm mounting block mounted under the alloy chassis (like the 22). Judging from the angle of the chassis in relation to the outdrives i'd say theres a cut-out or hole in the front of the chassis that the front pulley sits into.

Well, what is clear is that it's a prototype - how much is retained from the prototype that ran that Nats track the day after, and what's actually used at next month's worlds, and how much is changed prior to release (maybe) by the end of the year, is hard to say.

We'll see! :thumbsup:

[Razer]

Well, what is clear is that it's a prototype - how much is retained from the prototype that ran that Nats track the day after, and what's actually used at next month's worlds, and how much is changed prior to release (maybe) by the end of the year, is hard to say.

We'll see! :thumbsup:

Well, all the parts look surprisingly ready for production:P

[Flauschi215]

Well, all the parts look surprisingly ready for production:P

Ohhh yes Looks Perfect ;)

[Kash]

The initial story is on this link

http://www.liverc.com/news/special_features/5345-LRC_EXCLUSIVE%3A_TLR_4WD_Spy_Shots!/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+LiveRC+(LiveRC.com)

[PaulUpton]

Going to throw my neck out but......on the underside shot there is what looks to be a hole where motor sits ie to get motor lower. This is running length ways front to back, which would suggest motor is too so pinion at back end bell at front which would indicate shaft drive?

Hope its some trickery from tlr and it is actually belt drive :)

[terry.sc]

Going to throw my neck out but......on the underside shot there is what looks to be a hole where motor sits ie to get motor lower. This is running length ways front to back, which would suggest motor is too so pinion at back end bell at front which would indicate shaft drive?
If that hole is under the motor then they are using the motor from the Micro-T. Look at the first picture, you can see the layshaft sticking out of the body and the body shaped over the spur gear, just like the XX4.

As the XX4 still works so well there's not much point starting all over again with the chassis layout.

[rcpower]

it's alive... check out neobuggy ;-)

[NeilD]

http://www.neobuggy.net/

[OneKiwi]

Here it is

http://www.neobuggy.net/2013/08/13/tlrs-4wd-breaks-cover/

[NeilD]

Here it is

http://www.neobuggy.net/2013/08/13/tlrs-4wd-breaks-cover/

I beat you to it Simon :p

[Hofvander]

The Americans have noticed that it says TLR 24 on the shocks and the 2 stands for xx and the 4 for a.....4. As a tribute to the old car that it seems to be based on by looking at the photos.
Who knows.

[Robby]

I beat you to it Simon :p
The both of you are about 24 hours late. :lol:

The Americans have noticed that it says TLR 24 on the shocks and the 2 stands for xx and the 4 for a.....4. As a tribute to the old car that it seems to be based on by looking at the photos.
Who knows.

Um, uh, really? :confused:

[magnus]

And they haven't used the front or rear arms from the 22! At least I thought they would when the 22 came out. It's all there to just put in the front driveshafts. Kind of...

[weavty1]

The both of you are about 24 hours late. :lol:



Um, uh, really? :confused:
LOL, I noticed someone removed my 'tylorweaver' watermark on the spoiler, but they forgot about the two other ones I hid in the photo! Nice try :p

Yes, it will be called the TLR 24, and no, the shocks say do not say TLR 24, they say "24 RR".


:thumbsup:

[bender]

http://www.tlracing.com/Products/Default.aspx?ProdID=TLR03005

There it is. That prototype from last month was pretty much production ready, no surprises there. Interesting that they've used UJ drive-shafts instead of CVD's but otherwise it is what was expected really, a revamped xx4.

Still looks as though it uses fine pitch belts up front too

[Delves]

:)

http://www.horizonhobby.co.uk/autoonline/j29_tlr/j29_kits/j29-tlr03005/j29-22-4.html