Pinions and Spurs

[ianski68]

hi guys, when I get back from holidays I am going to convert my motor to a Mid configuration....

whilst I have it apart I want to look at my gearing. I run a 10.5 motor!

what spur and pinion would work well at Watford?

thoughts and suggestions all welcome.

See you all soon Ian.....:thumbsup:

[absolute alignment]

Looking at the watford track top end speed is not the issue, so I would run std kit spur with a 21 pinion on a 10.5t motor. This should give you a good balance between torque and speed.

[ianski68]

Looking at the watford track top end speed is not the issue, so I would run std kit spur with a 21 pinion on a 10.5t motor. This should give you a good balance between torque and speed.



Cheers

[Garry Spice]

I wouldnt know what the watford tracks like but have been running a vampire 10.5 around maritime racing for 9months.
I found kit spur and a 28t pinion and boost all the way up on a hobbywing 2.1..
Hope this helps
Garry