View Full Version : TRF 501X FRONT ONE WAY #53951
Carl Hughes
27-08-2008, 08:35 PM
Hi, please can anyone tell me if the Tamiya front one way kit #53951 is better to have installed rather than the 37 tooth pully that comes supplied with the 501X WORLD EDITION, sorry but I don't know much about this and would value your comments.
thanks all
Carl Hughes
Howard1650
28-08-2008, 06:07 AM
The front one-way is a great option.
The front one-way does not fit on the 37 tooth pulley. The pulley internal diameter is to small to allow the one-way through the center. (I only just found this yesterday while trying to fit the one-way to my 501XWCE.)
The options are
Use the 35 tooth pulley that comes with the one-way kit. This will over drive the front wheels - by a lot.
Or purchase the 36 tooth pulley and adaptor plate, still over drives the front wheels.
Or drill out the 37 tooth pulley to fit.
Or purchase the centre one-way kit. (this is my choice because you can keep the front diff and the same drive front and back.)
Hairy Spider
28-08-2008, 07:40 AM
Hi,
Parts for 37T one-way listed below.
Regards,
Jon.
http://www.rcmart.com/catalog/rc-trf501x-hopup-parts-tamiya-adapter-oneway-54006-p-24877.html?cPath=595_744_1011
http://www.rcmart.com/catalog/rc-db01-hopup-parts-tamiya-front-oneway-pulley-54023-p-25635.html?cPath=595_744_1096
http://www.rcmart.com/catalog/rc-trf501x-hopup-parts-tamiya-front-oneway-53951-p-22467.html?cPath=595_744_1011
Howard1650
28-08-2008, 08:52 AM
Looks like the #54023 37T pulley is the way to go! Thanks Hairy.
(The 501XWCE kit 37T pulley number is #53988.)
toyracer69
28-08-2008, 11:18 AM
The front one way DOES fit the 37 pulley so long as you use the 37T one-way pulley and the adapter as well. I should know, since that's what I using at the moment. :thumbsup:
Howard1650
10-09-2008, 01:57 PM
Pic of the two 37T pulleys.
toyracer69
11-09-2008, 03:29 AM
The one with the big hole is for the one way but you have to use the adaptor plate make it fit centrally. :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.