PDA

View Full Version : Xb4 2014 setup


Sirslidealot
21-11-2013, 10:25 PM
Evening guys an girls
I've just got me self the new xray after running dex410 since I started off road
was looking for some setup tips on the xray for astro
I've put the same oils in as I would use in dex410
However there's only 1.2 6 hole so I put them in with 40wt f 30 r
Used 10,000 front 5,000 rear as supplied
The cars is at kit settings as it's not turned a wheel yet fitted the progressive springs back an front
I have the stiffer roll bars 3 marks and 4 marks

Any tips are help would be appreciated
Tnx Sirslidealot

woOdy
23-11-2013, 11:39 AM
Evening guys an girls
I've just got me self the new xray after running dex410 since I started off road
was looking for some setup tips on the xray for astro
I've put the same oils in as I would use in dex410
However there's only 1.2 6 hole so I put them in with 40wt f 30 r
Used 10,000 front 5,000 rear as supplied
The cars is at kit settings as it's not turned a wheel yet fitted the progressive springs back an front
I have the stiffer roll bars 3 marks and 4 marks

Any tips are help would be appreciated
Tnx Sirslidealot


If you start with the carpet set up from the instructions you will not be far off a dry astro set up. If its wet though you will have to change it slightly.

Redbull8447
23-11-2013, 01:21 PM
Search for Xray forum on google there is a astro setup on there from TELFORD track. Might be a good starting point

http://forum.teamxray.com/xform/index.php?act=view&ID=136&setup=xb4

Redbull8447
23-11-2013, 01:50 PM
Search for Xray forum on google there is a astro setup on there from TELFORD track. Might be a good starting point

http://forum.teamxray.com/xform/index.php?act=view&ID=136&setup=xb4