Please help

[Ben20]

I've just bought a new transmitter core code fshh. I've managed to get the steering working but nothing on throttle. I've tried programming my esc and still no joy. Tried fitting my old transmitter and and everything works fine. My esc is a reventon r.

[grimidol]

Try swapping over 1 and 2 on the receive this will tell you that the hand set is working on both sticks

[mattr]

Might sound daft, but you are using the new receiver too?

And have you recalibrated the esc?

[nites]

Is your transmitter the one with the throttle hold switch/lever on the top right hand side? Make sure its switched off.
This caught me out the first time i put the car on the track for my first race......embarrasing but i never failed to check it after that lol

[Col]

Revention series requires some transmitters to reverse the throttle channel. Give that a go.

[Simion Wabs]

As above poster but also ensure atl is set at 100.
Then recalibrate the esc :thumbsup:

[Ben20]

I've tried changing over the plugs and both sticks are working. Yes I am using the receiver that came with the kit. I've recalibrated the esc with no joy.
Not sure which button u are talking about is it the TH.HOLD lever

[Ben20]

Fixed thank you I reversed the throttle and all working. Thank you again for everyone's help

[Col]

Always pays to read the instructions:p

Glad you got it sorted:thumbsup:

[fidspeed]

instructions are last resort Col

ooples miles better :thumbsup: