PDA

View Full Version : Your speedo dimensions in the 410


brooksy
12-01-2014, 09:03 PM
Hi guys,was just wondering if you know what the L/W/H of your speedo's are in your 410 and how well they fit in with the reciever in such a small space.
(My reciver is a core)
The reason i ask is I've just ordered a combo and the esc dimensions are 39mm-38mm-20mm. I was wondering what the biggest is that can go in with the size of reciver I have.

If this is a tight fit I'm thinking of putting my Absima cts 10 in which Is a bit smaller. I've had a look on the install pages but quite a few are running micro receivers in there's.
Any info would be greatly appreciated.

Phill

OneKiwi
12-01-2014, 09:10 PM
You pretty much need a micro RX in there or remove the RX box and shrink wrap it then stick it somewhere.
I have seen a RX8 in there and a reventon pro.. they are pretty large as well as a mamba max I think it was on the rctech pages, there are a few to go through there

R10 fits nicely so will the CTS10

DynaMight
12-01-2014, 09:13 PM
If you've got a Core RC transmitter with the LCD screen, you can use this mini receiver: http://www.hobbyking.com/hobbyking/store/__22910__HK3100_3ch_2_4ghz_FHSS_Micro_RX_suits_HK3 10_Turnigy_3XS_TX_.html

Works perfectly and a lot smaller than the stock receiver.

brooksy
12-01-2014, 09:35 PM
If you've got a Core RC transmitter with the LCD screen, you can use this mini receiver: http://www.hobbyking.com/hobbyking/store/__22910__HK3100_3ch_2_4ghz_FHSS_Micro_RX_suits_HK3 10_Turnigy_3XS_TX_.html

Works perfectly and a lot smaller than the stock receiver.

That's the Fhss reciver,I've got the old radio. The dark brown case on it.
Some thing like that would be great though.

brooksy
12-01-2014, 10:10 PM
This is the etronix that I have in my tm2 at the moment.

ET1050 Etronix Pulse EX3G 2.4GHz Receiver (CR139)

Charger
12-01-2014, 10:13 PM
Hi there, I run a Speed Passion GT 2.0 LPF with a Spektrum SR301 (standard sized/quite big receiver) which I run on its side underneath the front centre driveshaft and have no problems.

brooksy
14-01-2014, 08:26 AM
That's where I had my reciever in my origianal full fat 410. I had a orion vortex speedo in that and that was quite big. Think I'll wait till my combo turns up and then decide which gear to put in.

Cheers guys.