Help with Speed Passion Reventon Pro

[knighthawk]

Ok, not happy today !

Had to take a year out due to an accident.

Was checking everything last night for an up coming meeting to get back into racing..

Everything was working fine, but decided to put Mod2 ( was running Mod1 ), so fired up the laptop, usb'd the LCD Programme Box, disconnected the lipo's and rx & fan plugs, plugged in the LCD rx lead into the esc, the esc then turned on by itself, now the yellow/amber light is on solid and nothing works !

The Reventon PC programme just keeps asking to connect to the esc, I hit yes, 5 sec later it asks again.

Plugged everything back in when the PC is disconnected, but the yellow/amber light is solid on, the esc excepts no input from the tx, servo and pt working fine.

I now it's F***ED , but what the hell has happen, can anyone shed any light ?

Cheers in advance.

[boy_lard100]

Did you plug into the battery port on the receiver rather than port 1?
(Speaking from eexperience)

[mattr]

If the yellow light is on, that just indicates that is a sensored motor.
I'd be checking all the connectors/cables and trying another rx/motor/sensor cable.

[knighthawk]

Did you plug into the battery port on the receiver rather than port 1?
(Speaking from eexperience)

No mate, I plugged the LCD Programmer lead into the esc rx port after removing the rx plug !


If the yellow light is on, that just indicates that is a sensored motor.
I'd be checking all the connectors/cables and trying another rx/motor/sensor cable.

Matt, good advice, will rip all the kit out of my 4WD and check each one