where to connect fan?

[rondoolaa]

My ezrun 60a esc fan stopped working so I put a new one in and that doesn't work so tried another 3 new ones and all don't work so I'm guessing the esc fan connector is bust on the esc side,

The fans are only 5v and I run 7.2v 2s cells, they read 8.4v when fully charged obviously.
Where is the best place to get power from for my fan.
Thanks for any replies.

[jon kedge]

Hi there,this happened to me and all i do is connect mine to the reciever using a old servo wire if you have any spare channels in your receiver as it runs at 6v.Turns on with the car at the esc switch.Hope this helps..jon

[mattr]

Yup, just plug it into the rx.
That's where my early ones went, before I got an esc with built in power.

If you haven't got a spare channel, just get a servo y lead and piggy back it off something like your pt.

[rondoolaa]

Thanks for the answers guys, spare rx plug it is, Thankyou