PDA

View Full Version : DESC210R Alu Chassi - Where to buy?


mistkerl
13-03-2014, 10:02 AM
Hello,

does anybody know where i can buy a alu chassi for my DESC210R? The Original Chassi is to flexi :)

Thanks
Jens

micholix
13-03-2014, 11:15 AM
Hello,

does anybody know where i can buy a alu chassi for my DESC210R? The Original Chassi is to flexi :)

Thanks
Jens

Hi Jens,

How about the RD +11?
Sorry, i can't find the thicknes of it!
Doesn't have the DESC210 allready a +8 chassis length?

http://www.revolution-rc.com/our-products/durango-option-parts/rdrp0184-dex210-plus11-chassis-set.html

Frecklychimp
13-03-2014, 11:30 AM
Hi Jens,

How about the RD +11?
Sorry, i can't find the thicknes of it!
Doesn't have the DESC210 allready a +8 chassis length?

http://www.revolution-rc.com/our-products/durango-option-parts/rdrp0184-dex210-plus11-chassis-set.html

DESC210 is around 65mm longer than a standard DEX210 aluminium chassis!

micholix
13-03-2014, 11:45 AM
DESC210 is around 65mm longer than a standard DEX210 aluminium chassis!

Ah ok, i didn't know that, as i dont have one!?:blush:

mistkerl
13-03-2014, 11:59 AM
Jep thats the point.

I cant find a alu chassi for that car. Does anyone built a alu chassi themeself?

ekt
13-03-2014, 12:19 PM
There has been a few people gauging interest in making them, but it seems there hasn't been much interest http://www.rctech.net/forum/r-c-items-sale-trade/753977-durango-dex210-11-dest210-desc210-aluminum-chassis.html

Have you tried the type B DIMEC20 chassis? It's a lot stiffer than the original chassis and performs better on high grip surfaces.

Dino_D
13-03-2014, 03:39 PM
Hello,

does anybody know where i can buy a alu chassi for my DESC210R? The Original Chassi is to flexi :)

Thanks
Jens


Try the Dimec20. Its very stiff.

Danosborne6661
13-03-2014, 03:54 PM
We've stiffened ours massively by making a battery strap the uses 4 points on the top, makes a huge difference!

rcjunky
14-03-2014, 02:55 AM
Like this ;)

http://i696.photobucket.com/albums/vv323/rcjunky1/IMG_2795_zps1fd5105e.jpg (http://s696.photobucket.com/user/rcjunky1/media/IMG_2795_zps1fd5105e.jpg.html)

The machinist was too busy to crank these out. Very few +8mm where made, a couple ST's and 2 SC chassis. They are wicked dialed but not much else I could do to speed it up :( a 4 point battery strap will limit flex, and the new type B chassis is much stiffer. Give the dimec20 type B a try.