PDA

View Full Version : Atomic Carbone DB-01 Rear Shock Towers


i4n
26-10-2008, 07:23 PM
Hi All,

I've been email Jonathan at Atomic Carbon and he is willing to produce some modified rear shock towers for the DB-01 that can run the TRF 501X shocks without all the associated problems with their extra length.

The only downside is that to make it economical enough a minimum order quantity of 10 is required. I haven't got a quote at the moment as that will all depend on the final design/quantity ordered.

Obviously, I'll have one but are there 9 others of you out there that are interested?

If you are can you add you names to the post and then I'll go back to Jonathan.

Cheers,

Ian

DCM
26-10-2008, 07:26 PM
depending on the price, I would either have one..... or two :woot:

General Accident
26-10-2008, 09:03 PM
As DCM says dependant on the price I will have 2 at least.

i4n
26-10-2008, 09:16 PM
I've just dropped Jonathan an email asking for a rough price, when I know - you will too!

Ian

i4n
27-10-2008, 10:02 PM
I've just had news on a rough price back from Jonathan.

The price (based on being made from 4mm carbon fibre and an order of 10) will be in the region of £10 - £14 each + postage.

The firm price from Atomic Carbon will be known once drawings have been made and the exact area of CF is known per tower and also on the total amount of towers purchased.

Once again, these prices are only estimates but will be formed up when the design is finalised and the quantity is known.

If you would like once, please add your name to the thread so I can collate numbers.

dimblum
29-10-2008, 06:57 PM
I was hoping someone would make shock towers like these. Count me in for a set.

robbo145
29-10-2008, 08:45 PM
Count me in

A.J. Gee
29-10-2008, 11:04 PM
very interested here:thumbsup:

A.J. Gee
08-11-2008, 03:50 AM
Whats the deal on the shock towers for the Durga? Is it gonna go through or not? Thanks. A.J.:thumbsup:

A.J. Gee
11-11-2008, 12:46 AM
Bump

i4n
11-11-2008, 10:15 AM
Hi Guys,

Sorry for the pause in getting back to you - I haven't noticed the thread appearing on my "unread posts" bit.

We're not at the 10 towers needed for Jonathan to make them at a reasonable price yet :cry:, as soon as we get the numbers required I'll be in contact with him again.

For the record I have the following interest:

Me - 1
DCM - 1 (maybe 2)
GA - 2
dimblum - 1
Eddie168 - 1
robbo145 - 1
AJ - 1

So that's 8 for definite (9 possibly) so ideally I'd like to get to 10 definite before placing the order (otherwise I'm going to be left out of pocket and I don't want that to happen).

I was thinking about delivery - I will get them all sent to me and then I will distribute them out to all of you for cost (DCM will get a personal delivery!) if that is OK?

Ian

A.J. Gee
11-11-2008, 07:30 PM
If all goes well and we get enough people that want the shock towers, will you be shipping to the states?

i4n
11-11-2008, 07:51 PM
If all goes well and we get enough people that want the shock towers, will you be shipping to the states?

I'll ship anywhere at cost.

linger
11-11-2008, 09:53 PM
2 for me

General Accident
11-11-2008, 10:43 PM
Excellent. Look forward to the next step. Do you want a Paypal deposit or anything?

simoncook
12-11-2008, 09:35 AM
Hi there, I would be interested in a set of these too, I can pay by cheque/paypal or whatever.

Does the price drop a little, if more people are interested?

i4n
12-11-2008, 09:38 AM
2 for me

Excellent, that's the 10 we need now then :D

I'm email Jonathan when I get back from work with the request. I've got to send him an original off to get the basic size from before it can adjusted for what we want, drawn up and the exact area of CF calculated (it will be 4mm and bullet proof!). Once that happens I can get a quote and lead times etc.

I don't know how long the process will take but as soon as I know anything I'll update the thread.

When a price is known, I will be looking to take a non-refundable deposit of 50% (as I'll have to pay everything up front). I will PM all concerned with my PayPal address (apart from DCM who can give me the cash). I will then be looking for the remainder of the price plus shipping once the total amount is known.

I hope that is acceptable to all.

Ian

i4n
12-11-2008, 10:47 AM
Hi there, I would be interested in a set of these too, I can pay by cheque/paypal or whatever.

Does the price drop a little, if more people are interested?

The more the merrier mate! Economies of scale will mean the more people we have the smaller the price will be.

Remember though, it is only the rear tower being made and it will be modified to allow the use of the TRF shocks from the 501X (they are longer than the standard DB-01 items). The front tower works fine with the upgraded shocks.

DCM
12-11-2008, 12:00 PM
I will PM all concerned with my PayPal address (apart from DCM who can give me the cash).

WHAT, I got to pay..... strewth fella!!! just let me know dude

simoncook
18-11-2008, 06:45 PM
Bump :)

i4n
18-11-2008, 11:06 PM
Simon,

What was the point of the bump? I said I would update the thread when I had any information and PM all concerned with my PayPal address for the deposit.

I have no information, hence no update.

When I have any information I will update the thread.

Ian

i4n
19-11-2008, 10:49 PM
Hi All,

Just a quick update, the original tower has now been sent off and a AC have produced a CAD drawing of the original.

I'm going to discuss the changes over the weekend with a fellow DB-01 runner and then get these sent back/prototype drawn up.

Ian

i4n
26-11-2008, 10:39 AM
Hi All,

An update on progress - a design has been agreed between myself and Jontahan. It will also allow the use of the standard shocks as well as the TRF one as it includes two sets of mounting holes (more options!). Jonathan is making a prototype to send out to me for evaluation.

As it will be flat you will need to get spacers to move the shocks out a tadge.

Also, the upper arms ball studs won't be able to screw into the CF like they do on the plastic tower. You will need to get hold of some correct sized ball studs that have an internal thread and then hold them on with a screw and threadlock, again spaced out a little from the tower with washers (I have ordered some more of the one that goes onto the steering arm from the servo, Tamiya Pt Number: 9808012 - I will let you know if these work!)

Ian

Spoolio
26-11-2008, 05:58 PM
Sounds promising, looking forward to the next update.

i4n
26-11-2008, 08:48 PM
Another update in a day (I should have given you the other update a couple of days ago.........)

Jonathan has had the prototype made, picture shows it next to an original tower. It is in the post to me to try out so I'll let you know how it goes.

I have also had the price confirmed at £15 each (£1 more than my top estimate, sorry). They are bigger than the RB5 rear towers AC also make that sell at £18 so still a bargain in my eyes.

I'll leave the possibility of anyone else adding to the order list until Friday 5th December and then I'll be looking at final numbers to pass on. All those that have been in contact with me expect a PM around then with the details for sending me your PayPal deposits!

As it stands, the list of orders is:

Me - 1 (possibly 2 as I'm sure I'll find a way to break one!)
DCM - 1 (possibly 2)
General Accident - 2
Dimblum - 1
Eddie168 - 1
robbo145 - 1
A.J. Gee - 1
Linger - 2
simoncook - 1
gargadud - 1
e-JP - 1
MJX - 1

There may also be a possibility of Jonathan keeping these as a stock item too.

Ian

gargadud
26-11-2008, 09:00 PM
if you can ship to Switzerland for a reasonable price I would go for 1 piece.

Cheers

i4n
26-11-2008, 09:08 PM
if you can ship to Switzerland for a reasonable price I would go for 1 piece.

Cheers

I will ship for cost, which according to the Royal Mail starts at 50p (but I'd guess 1st class would be about £1.50 in a nice padded envelope).

I'll add you to the list then!

Ian

e-JP
27-11-2008, 12:51 AM
Count me in too. for 1 shipped to Canada.
Thx.

gargadud
27-11-2008, 07:53 AM
I will ship for cost, which according to the Royal Mail starts at 50p (but I'd guess 1st class would be about £1.50 in a nice padded envelope).

I'll add you to the list then!

Ian

Yes :)

Thanks for your quick feedback.

i4n
28-11-2008, 05:56 PM
Hello All,

Tower arrived in the post today, it looks mighty fine!

I've got it on the car but it's not quite there yet. The upper arm ball joints are on and fine (I used a Tamiya 9804206 in the end, the longer of the two "nut" ball studs. These went on directly with no spacers or anything:thumbsup:. The others that I thought I was going to use in my earlier post will will work but will need spacing out a bit).

The shocks are nearly there, but I don't have any long enough M3 screws in the bits box. I have got a 20mm screw on at the moment with 8mm of spacers and there isn't enough thread left to put a nut on securely. I have ordered some 25 and 30 mm M3 screws from Model Fixings and they should do the job nicely. The shocks are laid back at a bit on an angle so I'll have a play with a couple of washers too when the longer screws arrive.

The TRF shocks I have are in the top holes, without any internal limiters and the droop is spot on

All is looking good.

Photos attached of it on the car (please ignore the Dirt Hawg tyres - been thrashing it around in the street and am saving my mini spikes!)

i4n
30-11-2008, 07:27 PM
Hi All,

I ran the buggy with the tower today at Caldicot - no problems whatsoever. I had to take one of the spacers out and the shocks didn't bind or anything (I just didn't tighten the nuts up too tight).

I think Thunderbirds are go!

Just awaiting any last minute takers for the tower - I will PM all interested people at the end of the week with my PayPal address. I'll want a 50% deposit of £7.50, non-refundable (if you change your mind, if it all goes Pete Tong from my end then you'll get it back). If you send it as a gift I won't get any charges taken from it (hint hint!). When I get them in my hands I'll PM all of you again for delivery address etc. and also for the remainder of the balance + postage (at cost).

Ian

DCM
30-11-2008, 07:30 PM
they are a mighty beefy items to have on your car, and will give you the option of stock shocks and TRF ones.....

Spoolio
30-11-2008, 07:53 PM
Are they Losi springs that I see there?

i4n
30-11-2008, 07:53 PM
they are a mighty beefy items to have on your car, and will give you the option of stock shocks and TRF ones.....

And Steve tried hard to break it a couple of times too!

DCM
30-11-2008, 09:03 PM
grrr, bloody gay steerwheels lol

i4n
30-11-2008, 09:09 PM
Are they Losi springs that I see there?

They are indeed! They are slightly shorter than the Tamiya ones so were ace with the limiters in the shocks as they didn't add too much pre load at full extension.

Not on there now as after I took the photo I set the back end up properly with the limiters removed they were then too short and I had to wind the shock adjusters right down to get the drive shafts level.

And the pink clashed with the blue :thumbdown:

i4n
30-11-2008, 09:11 PM
grrr, bloody gay steerwheels lol

Not gay, just different :D

MJX
02-12-2008, 12:55 AM
If there is still time, count me in for a set too (shipping to the US).

Spoolio
03-12-2008, 07:28 PM
And the pink clashed with the blue :thumbdown:

If you'd have said that in the early 90's you'd have been lynched by an angry mob of shell suit wearers. Funny how fashion changes innit ;).

i4n
03-12-2008, 07:47 PM
If there is still time, count me in for a set too (shipping to the US).


You're not too late mate. On the list you go.........

i4n
05-12-2008, 01:54 PM
Hi All,

Right - the list is now closed!

It stands at:

Me - 1 (possibly 2 as I'm sure I'll find a way to break one!)
DCM - 1 (possibly 2)
General Accident - 2
Dimblum - 1
Eddie168 - 1
robbo145 - 1
A.J. Gee - 1
Linger - 2
simoncook - 1
gargadud - 1
e-JP - 1
MJX - 1

PMs going out later today with my PayPal details on. I want 50% of the total which is £7.50. The remaining £7.50 to follow, plus postage (at cost, so will be different for most of you) when I receive the posts (which I will announce on here!).

Ian

i4n
05-12-2008, 05:37 PM
Hi All,

To avoid confusion - to send as a gift in PayPal you need to go to the "send money" page, then click the "personal" tab. Gift is in there, not under purchases.

Ian

General Accident
05-12-2008, 05:39 PM
Yuss, done it my friend. You should have £15 from me for my deposit for 2 towers, although judging by my driving last week perhaps I should have ordered 5 ;).

i4n
05-12-2008, 05:49 PM
Cheers :thumbsup:

i4n
06-12-2008, 09:29 AM
It seems that not all the different country versions of PayPal have the "gift" option :mad:

My UK screen looks like the attachment.

If you are outside of the UK PayPal is taking the following charges: £0.49 for £7.50 and £0.79 for £15. Can I request you add this to your payment please.

Also, in your checkout notes can you put in what your oOple name is. Some already have and it is making my life a lot easier :)

Cheers,

Ian

General Accident
06-12-2008, 10:30 AM
A question of critical importance....will Atomic Carbon throw in a sticker or two with each tower?

i4n
06-12-2008, 11:25 AM
A question of critical importance....will Atomic Carbon throw in a sticker or two with each tower?

Don't know - perhaps Jonathan will answer that one for us.............

OldTimer
06-12-2008, 08:43 PM
A question of critical importance....will Atomic Carbon throw in a sticker or two with each tower?

Yes :D

General Accident
07-12-2008, 07:54 AM
Woohooo :thumbsup:

A.J. Gee
08-12-2008, 12:59 AM
I just wanted to say that i hope these carbon towers are a lot stronger than the 3racing brand towers. I had a front and a rear crumble on me already and im hoping that wont happen again. lol. With the new shock tower, will i be able to run the rear universal shafts?

dimblum
08-12-2008, 07:15 AM
Hi All,

To avoid confusion - to send as a gift in PayPal you need to go to the "send money" page, then click the "personal" tab. Gift is in there, not under purchases.

Ian

I don't have an option for a "personal" tab and I couldn't find a way to send money as a gift?? If you like I can send additional money to cover the paypal fees...

I'm not sure how else to send it..

Dan

i4n
08-12-2008, 08:39 AM
Dan,

If you are outside the UK you'll have to add charges to the payment I'm afraid - post #45 tells it all!


AJ,

They are bullet proof mate! I had mine doing 'end over ends' the other week and nothing happened at all. Of course if you do go upside down at about 50MPH into a curb it may be a different matter........

As for universal shafts, I've been running them since I built the car. With the standard tower and the prototype AC one too. No worries there either.

Ian

dimblum
08-12-2008, 06:02 PM
Dan,

If you are outside the UK you'll have to add charges to the payment I'm afraid - post #45 tells it all!


AJ,

They are bullet proof mate! I had mine doing 'end over ends' the other week and nothing happened at all. Of course if you do go upside down at about 50MPH into a curb it may be a different matter........

As for universal shafts, I've been running them since I built the car. With the standard tower and the prototype AC one too. No worries there either.

Ian

Done :D I sent the payment with the extra charges.

Dan

i4n
11-12-2008, 06:48 PM
Hi All,

Just to let you know I've received deposit payment from:

General Accident
MJX
Robbo145
e-JP
gargadud
linger
simoncook
dimblum

Just waiting for the others to pay the deposit and then the order will be sent

Steve, give me the cash when I see you next - not at COBRA Sunday as I'm busy doing other stuff. Do you want 1 or 2?

Ian

General Accident
17-12-2008, 10:00 PM
Hi,

Just wondered if everyone has followed through with their "pledges" yet?

What sort of timescale will AC work to once the order is placed Ian?

Ta.

i4n
17-12-2008, 10:20 PM
Just wondered if everyone has followed through with their "pledges" yet?

Not yet, one left to go but I don't want to go publicly naming just yet. I have sent them a PM reminding them of their commitment.


What sort of timescale will AC work to once the order is placed Ian?


Being perfectly honest I'm not too sure. Jonathan had the prototype to me in under a week from agreeing the design so I would imagine early in the new year what with Christmas getting in the way!

I'm also sorry for not being active on the board and keeping updates going but I have been absolutely snowed under at work and the last thing I've been wanting to do is fire up the home PC for a a couple of weeks.

DCM
17-12-2008, 10:43 PM
Hi All,

Just to let you know I've received deposit payment from:

General Accident
MJX
Robbo145
e-JP
gargadud
linger
simoncook
dimblum

Just waiting for the others to pay the deposit and then the order will be sent

Steve, give me the cash when I see you next - not at COBRA Sunday as I'm busy doing other stuff. Do you want 1 or 2?

Ian

not sure if or when I will be back at COBRA, so you want paypal dude? 2 please

i4n
18-12-2008, 08:36 AM
not sure if or when I will be back at COBRA, so you want paypal dude? 2 please

Go on then mate, PayPal me!

i4n
20-12-2008, 12:44 PM
Right then - my last post about payments and the PM I sent wasn't a big enough hint for one of them:

A.J. Gee

Can you please pay your deposit, you are holding up the order process.

If I don't have a the deposit sent by 09:00 Monday 22nd December you will be off of the order, someone else has already expressed a wish to have your tower.

Over to you mate..............

i4n
22-12-2008, 11:09 AM
No reply or funds from AJ, sorry mate but I gave you enough chances (time, PM and post). I'm going to have to drop you from the list.

List going to Jonathan today.

I'll get the towers in sometime around mid Jan and I'll drop you all a PM or update the thread (or possibly both!) requesting the remainder of the funds and postage address (if it isn't on PayPal).

Merry Christmas all.

Ian

i4n
24-12-2008, 08:27 PM
Evening all,

Just to let you know - money has now been paid to Jonathan (what you sent me) with the remainder due in about 2 weeks time.

Ian

i4n
09-01-2009, 08:44 PM
Update time :woot:

I have just had news from Jonathan that the towers are almost done - ready to post to me for onward delivery to you lot mid/end of next week :thumbsup:

Can I have the remainder of your owed money please.

Again, those of you in the UK gift it to me please and those outside can you add a bit on like last time to cover the charges.

You'll also need to add postage onto this payment. I have had a chat with my friendly Post Office worker (I live in a village and she is genuinely helpful!) and I'm going to offer 4 prices in total for postage (2 UK and 2 International Airmail) and these will be 1st class standard postage or 1st class signed for/insured postage. The postage price also covers the cost of padded envelopes (as I can't steal this many from work without getting caught) etc.

Postage prices will be:

UK standard £1, signed for/insured £1.50
Int. standard £3 (insurance included in this one!), signed for £6.

Just one last things chaps, I need delivery addresses from MJX, Robbo145, simoncook and eddie1665

General Accident
09-01-2009, 11:06 PM
You have PM. :)

i4n
15-01-2009, 10:14 PM
Guy's

Can those of you who haven't sent me the remainder of the money do it ASAP please. I'd like to get it to Jonathan as soon as I can - the quicker you pay, the quicker we get the towers ;)

Ian

simoncook
16-01-2009, 09:57 AM
Who's on your naughty list Ian?

i4n
16-01-2009, 10:55 AM
Who's on your naughty list Ian?

I'm at work at the moment and can't check as the spreadsheet is at home.

I'm not really into public naming and shaming but will probably be forced into it soon:cry:

I think it is 3 people, but they know who they are ;)

A.J. Gee
18-01-2009, 03:04 AM
Hey man. I know i said that i wanted to buy the DB01 carbon shock tower, but my funds are very tight at the moment. Could you put one aside for me? I also wanted to know what the price will be in U.S.D. currency including shipping. Thanks. A.J.

i4n
18-01-2009, 06:52 AM
Hey man. I know i said that i wanted to buy the DB01 carbon shock tower, but my funds are very tight at the moment. Could you put one aside for me? I also wanted to know what the price will be in U.S.D. currency including shipping. Thanks. A.J.

AJ, sorry but I can't put one aside for you.

I did contact you privately (email and personal message) and on this thread several weeks ago requesting your deposit but I didn't get a reply. As I would have had to pay it out of my own pocket, when the deadline I had placed onto you passed I'm afraid someone else took your place for the tower.

Jonathan may have some he can sell seperately, I suggest having a look at the Atomic Carbon website.

Ian

A.J. Gee
18-01-2009, 09:54 PM
AJ, sorry but I can't put one aside for you.

I did contact you privately (email and personal message) and on this thread several weeks ago requesting your deposit but I didn't get a reply. As I would have had to pay it out of my own pocket, when the deadline I had placed onto you passed I'm afraid someone else took your place for the tower.

Jonathan may have some he can sell seperately, I suggest having a look at the Atomic Carbon website.

Ian

Thanks for the reply. And i truly do apologize for failing to receive your message. I often forget about receiving private messages on here since for me it doesn't happen very much. I greatly appreciate you and Jonathan going out of your ways to get these towers made for us DB01 owners. If in the future i see them posted on the Atomic Carbon website i will be sure to pick a set up. Thanks again for your time and effort that you helped put in for this. A.J.

i4n
22-01-2009, 05:44 PM
Hi All,

Just to let you know the towers are here and all packaged up (complete with some Atomic Carbon stickers for all :drool:).

I should get them posted tomorrow (depending if I finish work early enough) or Saturday.

Ian

gargadud
22-01-2009, 07:39 PM
Great :D

Thanks for the feedback and all the good work !

Cheers

Raymond

e-JP
23-01-2009, 03:35 AM
Yes, thank you for your time and good work.

Regards,

JP

simoncook
23-01-2009, 03:15 PM
Yes, I must say, thank you very much.

Thanks,
Simon

i4n
24-01-2009, 10:35 AM
All posted :)

Those in the UK should get them Monday/Tuesday next week.

The rest of you will be a little bit longer.

Ian

DCM
24-01-2009, 10:36 AM
you bringing my to COBRA tomorrow, Ian?

CAClark
24-01-2009, 03:16 PM
Random question from an observer, but how come only rears and not fronts as well?

Cheers!

i4n
24-01-2009, 05:44 PM
Steve,

I'm not there tomorrow - I'm recording a CD with the band and will be busy with that all day. I'll bring 'em next time or if you PM me your address and buy me a cup of tea next time I'm at COBRA I'll post them to you.

CA,

Rears because when you use the Tamiya TRF 501X option shocks they are too long and give you far too much droop, causing the drive shaft to drop out of the outdrive. One option used is to run internal limiters but I wanted to do a 'proper job' and contacted Jonathan at Atomic Carbon for a redesign. Another reason is the standard tower is a bit weak and can break when you land upside down.

The rear tower has been redesigned to be used with either the standard shocks or the option TRF ones (the TRF mounting holes are 5mm higher as the picture in post 25 way, way back shows the prototype against the standard tower. If you look at post 30 you'll see them on my car).

I have mentioned to Jonathan about a front tower but haven't gotten around to sending one off to be used as a basis for his design yet :blush: but to be honest, it was a hell of a lot of hard work sorting the rear tower out and there really isn't a need to change the front as the TRF shocks are spot on there.

Ian

DCM
24-01-2009, 05:45 PM
cup of coffee it will have to be...

good luck recording Agadoo tomorrow

General Accident
24-01-2009, 09:21 PM
Ian, thanks for all your work on this project, of course thanks to Jonathan at Atomic Carbon too. I look forward to receiving mine in the Royal Snail.

General Accident
26-01-2009, 09:42 PM
Arrived today thanks Ian, very pleased with them. Now need to pull finger out and source the necessary ballstuds. After I've rebuilt my Losi. Which will be after I've converted my 3-gear X6 to a 4-gear. Which will be after I've fitted a radio to my car. Which will be after I've flushed the central heating system. Do you see a pattern here :cry:.

i4n
27-01-2009, 09:42 AM
Arrived today thanks Ian, very pleased with them. Now need to pull finger out and source the necessary ballstuds. After I've rebuilt my Losi. Which will be after I've converted my 3-gear X6 to a 4-gear. Which will be after I've fitted a radio to my car. Which will be after I've flushed the central heating system. Do you see a pattern here :cry:.

Ha Ha, I know that feeling mate!

As for the heating - just put a jumper on. That should save you a few hours work ;)

simoncook
27-01-2009, 09:13 PM
Ian,

Mine came yesterday morning, with the free stickers too. Fantastic stuff, will put it on my car when I have a spare evening. I mite post up a pic too.

Thanks again :)

A.J. Gee
29-01-2009, 02:44 AM
Posting a pick will be greatly appreciated. :woot: Thanks.

gargadud
30-01-2009, 08:27 PM
Got it today :woot: very nice piece !

Thanks again for the good job.

dimblum
30-01-2009, 10:25 PM
Agreed. I got mine as well - very nice part. Now I can take the limiters out of my rear TRF shocks :D

I am hoping a front tower is also made - I had to put limiters in the front shocks to eliminate the strain of the bottom spring retainer pushing against the front arms.

e-JP
30-01-2009, 11:25 PM
Tower received today in snowy Canada. Very nice part. Will put it in my car this week-end.
Thank you again.

A.J. Gee
31-01-2009, 01:05 AM
Lets see some pics people. :drool:

i4n
31-01-2009, 12:58 PM
Glad the airmail is working guys :D

AJ, take a look at post 30 for pics of the prototype on my car - the production tower is the same.

A.J. Gee
02-02-2009, 03:21 AM
Thanks brother.sometimes my A.D.D. get's the best of me. lol

A.J. Gee
02-02-2009, 03:32 AM
Now i realize why i was asking for pics after the fact that they were posted by i4n in pose #30. The first time i tried to upload them it did not work. I just tried now once again and was able to see pic 2 of 4 the other 3 don't work for some reason. Nonetheless the rear tower looks very nice. If i go to the Carbon site will i be able to get a shipping estimate to the states? The price of shipping from the U.K. to the U.S. is my main reason for being as hesitant as i have been. For some reason i can see the shipping total being close to the price of the tower. This of course is not your problem. Thanks.

hypnolobster
03-02-2009, 12:30 AM
I just bought the final tower from Jonathan, and he's nice enough to ship it all the way to the US.
Does anyone know if he's planning on doing a second run of them or start selling them regularly on the website? I suspect I'll eventually break mine ;)

A.J. Gee
03-02-2009, 02:18 AM
I just bought the final tower from Jonathan, and he's nice enough to ship it all the way to the US.
Does anyone know if he's planning on doing a second run of them or start selling them regularly on the website? I suspect I'll eventually break mine ;)

How much did you pay for shipping?

hypnolobster
03-02-2009, 04:23 PM
£5.00

i4n
03-02-2009, 08:16 PM
Does anyone know if he's planning on doing a second run of them or start selling them regularly on the website?

Try sending him a PM on here his oOple ID is oldtimer

General Accident
06-02-2009, 09:39 PM
Anybody? 25mm or 30mm M3 screws for the rear shock top mount? What is the neatest? I haven't got any to try in my spares box and as I'm away at the moment I wanted to order some so they'll be on the doormat for when I get home.

DCM
06-02-2009, 09:44 PM
I use a 25mm countersunk screw, with C/S washer, then a 3mm blue spacer, M3 plain nut, then the normal mounting hardware. If Ian is racing this Sunday, I will get him to take a pic of mine for you.

General Accident
06-02-2009, 09:46 PM
That would be much appreciated DCM. Thanks.

i4n
07-02-2009, 12:27 PM
I did mine differently to DCM.

I used these: http://www.modelfixings.co.uk/high_tensile_steel_caps.htm in the M3 30mm size but they only have a 20mm thread so I used them through the tower with some spacers I had lying around (HPI purple ones), then the normal mounting hardware and then then nut (if that makes sense). There is about 5mm thread poking out the end on mine so a 25mm screw will be fine but I like to have the security of some extra thread sticking out of the nut (old habits die hard eh Steve ;))

DCM has probably done a better job so may go over to his way (seems similar to how the rear shock on my XXX-CR mount).

I'll get a picture on Sunday and pop it onto the thread.

Ian

mrbiccies
07-02-2009, 05:25 PM
I would be interested in a tower too...

i4n
09-02-2009, 05:30 PM
Here's the picture of DCMs monster!

mrbiccies - the thread is closed for purchasing towers (you're about 3 months too late I'm afraid). If you want one get in contact with Jonathan from Atomic Carbon. I know he made some extra to keep in stock so he's your best bet. His contact details are on the Atomic Carbon website or PM oldtimer on here.

Ian

dimblum
23-04-2009, 11:12 PM
I was hoping we could start a petition for Atomic Carbon to create a carbon fiber -front shock tower- for the DB-01 Durga / Baldre to match their rear carbon fiber tower.

Their rear tower is awesome and has basically become a requirement for anyone upgrading to the TRF Aerated Shock Kit (for proper rear shock travel with no limiters).

I have asked Jonathan at Atomic Carbon, but he said that he has no plans to make a front tower for the DB-01..

Is it possible we could convince Jonathan if we had enough DB-01 racers ready to buy one?? Kind of the same way the rear tower was developed??

gargadud
24-04-2009, 06:12 AM
Fully agree:thumbsup: if available I would order one!

aittam
25-04-2009, 10:23 AM
Hello,

I missed the first petition for the rear carbon shock tower.
I will not miss this one. Count me in!

Mattia.

Spoolio
25-04-2009, 02:07 PM
:confused:

Why the need for a carbon front tower (other than to match the looks of the rear one)? Geometrically the stock tower is fine and doesn't suffer the problem the rear tower had of being too "low" for the shocks.

i4n
25-04-2009, 03:01 PM
Why the need for a carbon front tower (other than to match the looks of the rear one)? Geometrically the stock tower is fine and doesn't suffer the problem the rear tower had of being too "low" for the shocks.

You're spot on there Spoolio :thumbsup: The whole reason behind getting a rear made up was to allow the use of the TRF shocks without having to run internal limiters in them.

The front tower doesn't have this problem and the TRF shocks work perfectly well as a direct replacement for the kit items.

Getting a front made would just be for the "bling" factor. I did approach AC about this just after the rear was sent out, but then decided better of it - it just isn't needed.

By all means, get together and approach Jonathan with numbers etc. and see if it is economical for him to do it but I won't be getting one as I don't feel the need. Also bear in mind that it was actually quite a bit of work organising everything (a lot more than I was expecting).

Ian

dimblum
26-04-2009, 06:41 AM
You're spot on there Spoolio :thumbsup: The whole reason behind getting a rear made up was to allow the use of the TRF shocks without having to run internal limiters in them.

The front tower doesn't have this problem and the TRF shocks work perfectly well as a direct replacement for the kit items.

Getting a front made would just be for the "bling" factor. I did approach AC about this just after the rear was sent out, but then decided better of it - it just isn't needed.

By all means, get together and approach Jonathan with numbers etc. and see if it is economical for him to do it but I won't be getting one as I don't feel the need. Also bear in mind that it was actually quite a bit of work organising everything (a lot more than I was expecting).

Ian

The "bling" factor is part of the motivation to have an Atomic Carbon front tower to match the rear.. Besides the bling, I like how much easier it is to mount and remove the shocks from a carbon fiber tower - just one threaded nut instead of removing an entire screw.. The carbon fiber towers also allow the shocks to have a little more play at the top which is also a bonus for easy unrestriced shock action.

I'm still hoping we can convince Jonathan to make a front tower. I would still love to have one :D

i4n - can you give me any advice on what we need to approach Jonathan with a proposal? How many buyers would be required to make it worth his time and effort? Thanks.

Dan

i4n
26-04-2009, 07:41 AM
Dan,

You have a PM.....

aittam
05-05-2009, 08:43 PM
Hi,

I have emailed Jonathan of Atomic Carbon asking for the rear shock tower and if he was going to make the front one.

He replied that the front shock tower for the db01 is in the works and hopefully should be ready in a few weeks time.

Mattia.

dimblum
05-05-2009, 09:29 PM
Hi,

I have emailed Jonathan of Atomic Carbon asking for the rear shock tower and if he was going to make the front one.

He replied that the front shock tower for the db01 is in the works and hopefully should be ready in a few weeks time.

Mattia.

Whoa! Thats great news.. I have been sick for the past week which is why I haven't updated the forums..

I was just getting back to recruit potential buyers before contacting Jonathan.. If he is making the front tower, then I am ready to buy :D

OldTimer
05-05-2009, 09:33 PM
I should have a proto ready early next week for testing, once i have a bit of feedback i will let you guys know. Btw the proto front tower is from 5mm carbon fibre, as it seems it takes a lot of abuse :woot:

3975dave
05-05-2009, 09:47 PM
5mm, cool! I like the sound of that:drool:

DCM
05-05-2009, 10:10 PM
I should have a proto ready early next week for testing, once i have a bit of feedback i will let you guys know. Btw the proto front tower is from 5mm carbon fibre, as it seems it takes a lot of abuse :woot:

I dunno, 5mm will go from snapping the tower to snapping the gearbox top, the thickness of the rear tower, is ample.

If your at Talywain, John, I will test it!!

jasonrcb
06-05-2009, 04:23 AM
I have been running 2 3mm front towers back to back and not broke a gearbox top yet, 5mm will be spot on

jasonrcb
10-05-2009, 05:29 PM
Tested the atomic carbon front tower today and believe me i went all out to test it just to make sure as i know some of you are concerned about breaking the gearbox top,well i gave the car more abuse today than most of you will all season and no problems at all passed every test

get your orders in to old timer if you race the car you know you go to have 1:thumbsup::thumbsup::thumbsup:

thanks jonathan for another quality product

aittam
01-06-2009, 04:30 PM
Hi,

I received the tamiya DB01 front and rear shock towers this morning.
I've just finished assembling them. They are beautiful and fit & finish is perfect. They look really tough.

Just one thing, I had to put 8mm of spacers in the rear shock tower to set the shocks at the right angle. Is this correct? Isn't the screw to long and easy to bend/break?

Cannot wait to try them!

Mattia.

suparajicon
21-07-2009, 09:26 PM
Does anybody have a decent picture please? Atomic Carbon doesn't have pics on their web site...:thumbdown:

DCM
21-07-2009, 09:43 PM
Hi,

I received the tamiya DB01 front and rear shock towers this morning.
I've just finished assembling them. They are beautiful and fit & finish is perfect. They look really tough.

Just one thing, I had to put 8mm of spacers in the rear shock tower to set the shocks at the right angle. Is this correct? Isn't the screw to long and easy to bend/break?

Cannot wait to try them!

Mattia.

They can bend, but that is cause unless you use a stepped shock mount, to move the top forward, there isn't much you can do.

T4miy4 Guy
22-07-2009, 07:05 PM
Hi

I had front and rear fitted to my Baldre but shattered the front this afternoon (First drive with them fitted), gutted it did a cart wheel after a bad landing then snap!

Don`t think i`ll by another tho, don`t think its strong enough tbh , well on the front anyway the rear seems awesome tho love the design, looks and is holding up well.

Andy

SCRUB ALL MY POST I HAVE THE CRAPPY 3RACING FITTED!!! DIDNT READ TITLE SORRY

i4n
22-07-2009, 07:16 PM
Dude,

As I said in post 8 and Steve backed me up in post 9 of this thread http://www.oople.com/forums/showthread.php?p=266594#post266594 you have 3 Racing towers fitted (or snapped), not the Atomic Carbon ones.

These are a completely different kettle of fish, my DB-01 has clipped a track marker at full speed and cartwheeled its way down 70% of the track and nothing has happened to the rear tower (Steve [aka DCM] snapped his 3 Racing tower when a Gnat breathed on it :lol:).

Ian

DCM
22-07-2009, 08:27 PM
Hi

I had front and rear fitted to my Baldre but shattered the front this afternoon (First drive with them fitted), gutted it did a cart wheel after a bad landing then snap!

Don`t think i`ll by another tho, don`t think its strong enough tbh , well on the front anyway the rear seems awesome tho love the design, looks and is holding up well.

Andy

SCRUB ALL MY POST I HAVE THE CRAPPY 3RACING FITTED!!! DIDNT READ TITLE SORRY

not to worry dude, I bought them, and binned them in the end, as they were too thin and weak.

T4miy4 Guy
22-07-2009, 10:15 PM
I`ve ordered an Atomic front tower and will post a pic , should get it Friday

:)

suparajicon
23-07-2009, 12:06 AM
yeah..I was suspecting they were a crap..so I never thought to buy them..Let's see how the Atomic C. go.

dimblum
23-07-2009, 06:17 PM
yeah..I was suspecting they were a crap..so I never thought to buy them..Let's see how the Atomic C. go.

The front Atomic Carbon tower is 5mm thick (1mm thicker than the rear tower). It's the beefiest carbon fiber part I have ever used.. You could throw your Durga off a cliff and that tower will not break.

T4miy4 Guy
24-07-2009, 04:20 PM
Got my front tower today and it is a beefy bit of kit

Here`s some pictures for people

http://i60.photobucket.com/albums/h31/logandadi/007-1.jpg

http://i60.photobucket.com/albums/h31/logandadi/008-1.jpg

http://i60.photobucket.com/albums/h31/logandadi/009-3.jpg

http://i60.photobucket.com/albums/h31/logandadi/010-2.jpg

http://i60.photobucket.com/albums/h31/logandadi/011-1.jpg

I used 3mm spacers on the shock`s might need more tbh, i`ll see

Andy

knighthawk
24-07-2009, 09:45 PM
hi guy's how much are the new shock towers

both front and rear


thanks

T4miy4 Guy
24-07-2009, 10:40 PM
Hi

http://atomic-carbon.gforceimages.net/cfp.html

£33.00

Andy

dr durga
25-07-2009, 07:54 AM
how would you order those carbon shock towers? cant find a button...

T4miy4 Guy
25-07-2009, 09:04 AM
:thumbsup:

Click on STORE in blue at the top on the right ;)

Andy

suparajicon
26-07-2009, 08:29 PM
Thanks for the pics! I think I'll get them.

suparajicon
31-08-2009, 08:25 PM
I have order a front tower. I'll let you know how it goes.

T4miy4 Guy
09-09-2009, 08:08 AM
Update!

Mine split on the front lower ball stud!! after a crash and tbh it wasn`t one of my worst but it split the carbon... think i`ll stick with stock

Ordered the rears on 29th and still waiting :thumbsup: should be ok the rear`s as the wing protects them and TRF501 shocks fit apparently better

(Thanks for the update Jonathan!)

Andy

suparajicon
13-09-2009, 07:57 PM
I have ordered a front one to try. I have in mind that sooner or later I will split it, but carbon looks cool in the car.
I think that the front tower gets most of the hits in the DB01. But as I am using now the centre one way and the car behaves as a 2wd, it seems that seems things are changing..Anyway, those cheap plastic towers are the best option for me, as I am not a good driver and jumps are not easy where I run.

Airwave
30-01-2010, 11:52 AM
I just mount mine (front and rear)...

Could somebody tell me how many spacer he puts to mount the suspension on the rear one? It seems that I need 5mm to make the cylinder vertical!

dimblum
02-02-2010, 07:18 PM
I have ordered a front one to try. I have in mind that sooner or later I will split it, but carbon looks cool in the car.
I think that the front tower gets most of the hits in the DB01. But as I am using now the centre one way and the car behaves as a 2wd, it seems that seems things are changing..Anyway, those cheap plastic towers are the best option for me, as I am not a good driver and jumps are not easy where I run.

Make sure to seal the edge of the carbon fiber with a couple layers of super glue (tire glue is fine) before you mount the part on your car. If you do, then it is nearly impossible for the carbon fiber to de-laminate.

I did this to both the front and rear Atomic Carbon shock towers. I have crashed and flipped many times.. Both towers are as solid as a rock.

HeavyD99
24-05-2011, 02:20 AM
Has anyone noticed that the top mounting holes on the front tower are actually lower than the stock tower? I didn't notice until I compared the two on top of each other. Well, I actually only noticed when the chassis would not bottom out - I installed the newer HL shock bodies, used 4mm spacers inside the shocks & saw that the buggy bottomed out on the lower spring collars, and the chassis still sat around 1 cm above the table! The difference between the holes of the towers is maybe 2mm, but once on the buggy it made a huge difference. So I've switcvhed back to the stock tower.

There might be enough room to drill one or two new holes above the stock hole locations - I may try it, the part is not much use to me otherwise.

FYI - I'm racing on carpet indoors. Maybe it's not as noticeable on dirt where more travel is used?

Comments?

simoncrabb
24-05-2011, 12:48 PM
I used to use one of these on my DB01, the extra droop was very useful, but agreed, indoors on carpet it might not be too handy.

I think the lowered shock tower was with the kit shocks in mind, which were arguably too short and didn't give enough droop.

I ran the lowered shock tower and the TRF shocks with success.