View Full Version : Servo wire routing
Nickwillyhams
12-08-2014, 06:41 PM
Hi all, after fitting the steering servo I'm unsure of the best way to route the servo wire, if anyone could share a decent image of how you've done it that would be great
Nick
Dex410 by the way
av4625
12-08-2014, 10:09 PM
The side of the servo that it comes out is the servo saver side, i have it coming round the outside of the servo saver and then just up to ur receiver and the excess wire just bunched with other wire in large heat shrink
Suzukitudor
13-08-2014, 05:40 AM
Get some heat shrink from maplin or RS components. Work out minimum length of cable required, fold wire backwards and forwards over its self in a multiple z shape. I do this same width as servo. Slide over heat shrink hey presto! Looks neat and keeps excess wire neatly tucked away alongside servo.
Here's how mine is routed. Just make sure that it doesn't rub on the servo saver.
http://durangofansite.com/pics/DEX410ServoWire.jpg
Nickwillyhams
13-08-2014, 04:27 PM
Cheers lads. I might even put a little double sided tape on the plastics to help hold it away from the servo saver
Jason A
13-08-2014, 09:11 PM
I found by running the servo wire on the other side there's a bit more space between the servo and steering post.
70546
Nickwillyhams
14-08-2014, 09:56 PM
These things are certainly a 'tight fit' :)
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.