b4 shock length

[spud31]

Hi

Can someone give me standard shock length of B4 shock without limiters, as my front must be too long as steering knuckles rub on arms at full droop.

Spud

[JCJC]

Ours run approx 74mm hole to hole on front shocks, at full droop knuckle clears by 2mm+, front shock shaft is 40mm, have had bottoms of ball stud rubbing on arm, had to make that flush. Make sure you have the correct shock ends (17mm total) yoke shock ends are longer (20mm+).

Our knuckle is "middle" position, washer above & below.

[spud31]

cheers your a gent

[bigred5765]

the steering blocks alway catch unless you limit the travel,dont worry about it,