PDA

View Full Version : what BL motor and ESC setup for EMB-1


tonydevon
24-11-2014, 12:12 PM
as per the title, its my first micro so Im not after ballistic mach 9 performance, trying to keep it affordable and reliable.

thanks

Karting
24-11-2014, 01:09 PM
as per the title, its my first micro so Im not after ballistic mach 9 performance, trying to keep it affordable and reliable.

thanks

Hobbywing 35amp speedo
Losi/Carisma (both same different packets) 4500kv motor. All in all the com o will be around £40.

If doing nationals, same Speedo but get the 6800kv motor for the long straights.

If you do follow the above advice, dint use the kit emb opinions as they won't fit on the shaft, once again buy the losi/carisma ones for a few quid each.

Also visit www.microrcracer.com as it's a dedicated site for all micros ��

tonydevon
24-11-2014, 01:24 PM
thanks will go browse them items

Tony

shaungooner
24-11-2014, 03:58 PM
Tony the LC can use a slightly larger motor can the Carisma so I'd go for this from Craig Harris at Thumbs Designs

http://thumbsdesigns.com/product/leopard-5200kv-4-pole-sensorless-motor-pre-order-special/

The kit pinions for the LC will fit on it too!

Hobbywing 60 amp ESC will be fine although most of the top drivers are using the extreme stock below

http://thumbsdesigns.com/product/hobbywing-xtreme-stock-bl-esc-blue-60a-2/

old jonesy
25-11-2014, 07:54 AM
Hobbywing 35amp speedo with the LC kit motor LCL6048 will do the job.