PDA

View Full Version : Cougar KF2 Launched


Yachty
28-01-2015, 11:04 AM
So toy fair time and the reason all the KF are for sale is because ....... this just got published on the Schumacher Website

http://www.racing-cars.com/pp/Car_Showroom/Cougar_KF2.html

mrspeedy
28-01-2015, 11:13 AM
Thats looks like it was worth the wait !!!

Where can I buy one :woot:

johnboy
28-01-2015, 11:14 AM
My kit already on order looks good

Danosborne6661
28-01-2015, 11:34 AM
Looks amazing, worth every second of the wait. Great work Schumacher as always :thumbsup:

adey
28-01-2015, 12:06 PM
Looking at this I would assume that I would need the new chassis, clutch and motor mount to convert my kf too this spec. Anyone know if that is correct?. Oh and the body if needed.

johnboy
28-01-2015, 12:33 PM
Low grip / core rc springs included nice work schumacher. 300 quid sounds pricey but reading the specs looks like a good buy.

Dudders
28-01-2015, 12:46 PM
What's new?

madmulc
28-01-2015, 01:17 PM
The only major differance is the clutch, Looking at it if I still had my old KF with low grip I would not change it. Im still not moving away from my SV2.

However the KF2 does look very nice lol

Gunter
28-01-2015, 02:16 PM
Not masses changed but did it need to? It's been refined (rear arm hangers) but the majority is making the kit have the option parts most ran like the alloy chassis and low grip motor position. (with the option of having it forward in the kit)

Option parts from the old car fit like the upper trans housings and the steering hubs and bellcrank so whats not to like :)

neallewis
28-01-2015, 02:34 PM
Looks great actually, much improved, but lots of essential low grip options left out, eg, ball diff, allow upper gearbox tops/shock mount, etc. I guess the choice is there to add those in if you need, along with all the other blingy bits schumacher offer.
Also its back to saddles, so you still need a shorty lipo conversion.

The old body should fit, barring the modification/fudge that you needed to do with hot spoons to clear the spur with a low grip chassis.

The rear end wishbone hangers are a good choice, far better now than the old method:
http://www.racing-cars.com/pp/Car_Showroom/images/KF2_rear_strap_1000.jpg

I'm sure it will do really well, and upgraders may find the cost of the new bits so close to a new kit that they may as well get the new kit.

Chris Ashton
28-01-2015, 02:37 PM
There's actually quite a lot of significant changes! Quite a lot of small ones too, but all together making a much better package.

NEW - Rear pivot straps that includes Anti-Squat and Inboard Toe-In options, two toe-in options in the kit with roll centre adjustment.
NEW - Dual motor position in the kit, by changing to the included low grip top deck and belt, forward and rearward motor position can be achieved, giving 21mm shift. (Shorty LiPo required for low grip rearward option.)
NEW - Super consistent, industry leading QUAD pad, vented slipper with easy access and NEW Ultra Fine adjustment spring.
NEW - 2.5mm Black Hard Anodised Alloy chassis.
NEW - Alloy Chassis Stiffeners, no front top deck for easier radio access/installation.
NEW - Simplified Motor Mount with increased cooling.
NEW - Fully optimised suspension geometry - Fast, consistent handling.
NEW - Pro Ball studs for 2mm hex.
NEW - Updated steering assembly for less play and easier use.
NEW - Optional fan mount for improved cooling under high load conditions.
NEW - Lightweight, narrower side gears for increased efficiency.
NEW - AirFlo Cab body shell for improved looks and handling.
NEW - Updated Pro spec 13mm big bore shocks with titanium nitride shafts, CNC machined 3 hole, 1.6mm rear and 1.5mm front pistons with recessed ‘e’clips, threaded collars, with twin O ring sealing and diaphragm volume compensation.
NEW - Shock Seal Pack Housing with added 'O' ring sealing.
NEW - CORE RC Springs, in the box!
NEW - Layshaft side mount with increased stability and rigidity for the spur, with improved tollerance.
NEW - Quick Release Layshaft.

Kyosho
28-01-2015, 03:06 PM
It will still need hop ups as previously stated, glad I didn't sell my old KF.

As for new geometry shock set-up that looks the same from the KF1.

How different is the quad slipper supposed to work etc?

I'm annoyed with Schumacher as I only rang a day ago to purchase bits for KF1 and they stated they didn't know anything!

racingdwarf
28-01-2015, 03:21 PM
It will still need hop ups as previously stated, glad I didn't sell my old KF.

As for new geometry shock set-up that looks the same from the KF1.

How different is the quad slipper supposed to work etc?

I'm annoyed with Schumacher as I only rang a day ago to purchase bits for KF1 and they stated they didn't know anything!

Yep, standard schumacher that,It's the one big thing I hate about the company, I bought a cat years ago when they came back into off road, two weeks later guess what , new one released, totally different, better and my sx think it was. And my new car was worth sod all:mad:.

Kyosho
28-01-2015, 03:27 PM
Yep, standard schumacher that,It's the one big thing I hate about the company, I bought a cat years ago when they came back into off road, two weeks later guess what , new one released, totally different, better and my sx think it was. And my new car was worth sod all:mad:.

Its not very good customer service at all and I almost jumped to YOKO for it!

mark christopher
28-01-2015, 03:31 PM
Looks great actually, much improved, but lots of essential low grip options left out, eg, ball diff, allow upper gearbox tops/shock mount, etc. I guess the choice is there to add those in if you need, along with all the other blingy bits schumacher offer.
Also its back to saddles, so you still need a shorty lipo conversion.

The old body should fit, barring the modification/fudge that you needed to do with hot spoons to clear the spur with a low grip chassis.

The rear end wishbone hangers are a good choice, far better now than the old method:
http://www.racing-cars.com/pp/Car_Showroom/images/KF2_rear_strap_1000.jpg

I'm sure it will do really well, and upgraders may find the cost of the new bits so close to a new kit that they may as well get the new kit.

Not true neil no lipo conversion needed
NEW - Dual motor position in the kit, by changing to the included low grip top deck and belt, forward and rearward motor position can be achieved, giving 21mm shift. (Shorty LiPo required for low grip rearward option.)

johnboy
28-01-2015, 03:33 PM
Not true neil no lipo conversion needed
NEW - Dual motor position in the kit, by changing to the included low grip top deck and belt, forward and rearward motor position can be achieved, giving 21mm shift. (Shorty LiPo required for low grip rearward option.)

It mentions about the top deck and belt but does that inc the battery straps and the belt layshaft?

Danosborne6661
28-01-2015, 03:45 PM
Ordered :D

Chesty
28-01-2015, 03:50 PM
Looking at this I would assume that I would need the new chassis, clutch and motor mount to convert my kf too this spec. Anyone know if that is correct?. Oh and the body if needed.

Looking at the exploded diagrams of the old and new cars I don't think upgrading KF to KF2 would be cost effective, even just for the 'essential' bits. The bulkheads and layshaft assembly is completely different (therefore loads of new parts required) and a whole new rear end...

The rear alloy gearbox top has a different part number as well. At least you can keep your ball diff and alloy yokes from the old KF:thumbsup:

Npdp72
28-01-2015, 04:16 PM
I think the V2 alloy gearbox uppers should fit the KF2.

The KF exploded drawing refers to the V1 uppers, whereas the KF2 exploded drawing refers to the V2 uppers. The plastic uppers have the same part number for both KF and KF2.

neallewis
28-01-2015, 04:19 PM
Not true neil no lipo conversion needed
NEW - Dual motor position in the kit, by changing to the included low grip top deck and belt, forward and rearward motor position can be achieved, giving 21mm shift. (Shorty LiPo required for low grip rearward option.)

Erm, manual states that you do need the following bits to run the shorty lipo option in the car:
http://courgette.jml.net/~neal/RC/kf2shortylipo.png

Ok it not the original KF shorty lipo conversion chassis kit, but quite a few bits of it that you do need to buy extra to make it run shorties. In my mind this is still an optional extra to run a shorty pack.

:thumbsup:

neallewis
28-01-2015, 04:24 PM
Erm, manual states that you do need the following bits to run the shorty lipo option in the car:
http://courgette.jml.net/~neal/RC/kf2shortylipo.png

Ok it not the original KF shorty lipo conversion chassis kit, but quite a few bits of it that you do need to buy extra to make it run shorties. In my mind this is still an optional extra to run a shorty pack.

:thumbsup:

Also website lists this:
http://www.racing-cars.com/pp/New_Cars_and_Parts/Cougar_KF2/U4706.html
U4706 Shorty LiPo Conversion Set - Cougar KF2
http://www.racing-cars.com/images/u4706_w.jpg

To be fair price of it, it's not going to break the bank, but should it be in the kit so you have the option on build?

Kyosho
28-01-2015, 04:35 PM
Also website lists this:
http://www.racing-cars.com/pp/New_Cars_and_Parts/Cougar_KF2/U4706.html
U4706 Shorty LiPo Conversion Set - Cougar KF2
http://www.racing-cars.com/images/u4706_w.jpg

To be fair price of it, it's not going to break the bank, but should it be in the kit so you have the option on build?

So already we have to buy extra bits for this car! will the KF parts fit?

Oliv996
28-01-2015, 04:41 PM
I think it's a mistake in the manual....

neallewis
28-01-2015, 04:42 PM
So already we have to buy extra bits for this car! will the KF parts fit?

Yup. I suspect there will be many KF's stripped for options and extras to bolt onto the KF2. And those who sold their KF's will have to re-buy the bits they had.

Kyosho
28-01-2015, 05:08 PM
Yup. I suspect there will be many KF's stripped for options and extras to bolt onto the KF2. And those who sold their KF's will have to re-buy the bits they had.
I think alot that sold up jumped to YOKO I must admit I was/am tempted

Adam F
28-01-2015, 05:19 PM
TBH the only thing I would see as a big advantage over the current KF would be the rear blocks as I hated how fiddly the old alloy block setup was.

I never had a problem with the slipper or motor mount and once the electrics were fitted, I didn't mind having a front top deck..

sly
28-01-2015, 05:38 PM
Well i`m selling my KF here and now open to offers as schumacher will only see money from me for tires http://www.oople.com/forums/showthread.php?t=162783

I cant help think it was a 'lets get rid of the original kf great design/layout as the designer no longer works here' might of been said.
I also think its a joke that they include black wheels in the kit but you see very few people running black wheels and the team drivers dont use them.
Either no wheels or white wheel in the kit.
I feel sorry for the people who either got a xmas gift kf, or bought one from xmas money as within less then 5 weeks its out of date:thumbdown::mad:

dwp102
28-01-2015, 05:42 PM
are the side gears not changeable now then?

Philim
28-01-2015, 05:46 PM
Its not very good customer service at all and I almost jumped to YOKO for it!

The reality is that this hobby goes in trends. Db1, then tm2, then kf......yz2 is now popular. Unless you have the latest car then sales will suffer.

Danny Harrison
28-01-2015, 06:20 PM
Well i`m selling my KF here and now open to offers as schumacher will only see money from me for tires http://www.oople.com/forums/showthread.php?t=162783

I cant help think it was a 'lets get rid of the original kf great design/layout as the designer no longer works here' might of been said.
I also think its a joke that they include black wheels in the kit but you see very few people running black wheels and the team drivers dont use them.
Either no wheels or white wheel in the kit.
I feel sorry for the people who either got a xmas gift kf, or bought one from xmas money as within less then 5 weeks its out of date:thumbdown::mad:
Same story for folk who bought a yokomo bmax2 worlds kit. You always take a gamble if you buy a current car thats been out so long. Best to wait for release day.

androo
28-01-2015, 06:34 PM
Looks like the cat K1 is due a few upgrades in the coming months?????????

h0m3sy
28-01-2015, 06:39 PM
Well i`m selling my KF here and now open to offers as schumacher will only see money from me for tires http://www.oople.com/forums/showthread.php?t=162783

I cant help think it was a 'lets get rid of the original kf great design/layout as the designer no longer works here' might of been said.
I also think its a joke that they include black wheels in the kit but you see very few people running black wheels and the team drivers dont use them.
Either no wheels or white wheel in the kit.
I feel sorry for the people who either got a xmas gift kf, or bought one from xmas money as within less then 5 weeks its out of date:thumbdown::mad:

Just because a new version is released doesn't mean the original car suddenly becomes crap! The fallacy that you have to have the latest car to be competitive is also crap! The original KF will be around for a few years to come yet. If you don't like what Schumacher do then you are under no obligation to buy the new car.

P.S I run the black wheels :p

johnboy
28-01-2015, 06:50 PM
Just because a new version is released doesn't mean the original car suddenly becomes crap! The fallacy that you have to have the latest car to be competitive is also crap! The original KF will be around for a few years to come yet. If you don't like what Schumacher do then you are under no obligation to buy the new car.

P.S I run the black wheels :p

Fully agree. Enjoying reading the moaning it's amusing

mark christopher
28-01-2015, 07:03 PM
Well i`m selling my KF here and now open to offers as schumacher will only see money from me for tires http://www.oople.com/forums/showthread.php?t=162783

I cant help think it was a 'lets get rid of the original kf great design/layout as the designer no longer works here' might of been said.
I also think its a joke that they include black wheels in the kit but you see very few people running black wheels and the team drivers dont use them.
Either no wheels or white wheel in the kit.
I feel sorry for the people who either got a xmas gift kf, or bought one from xmas money as within less then 5 weeks its out of date:thumbdown::mad:

eh?
tom did a lot of the development work, you can buy a new tv and it be replaced the next day or even a phone!

scooterboy
28-01-2015, 07:15 PM
If anyone doesn't want their black wheels you can send them to me :thumbsup:

Moss Models
28-01-2015, 07:18 PM
Also website lists this:
http://www.racing-cars.com/pp/New_Cars_and_Parts/Cougar_KF2/U4706.html
U4706 Shorty LiPo Conversion Set - Cougar KF2
http://www.racing-cars.com/images/u4706_w.jpg

To be fair price of it, it's not going to break the bank, but should it be in the kit so you have the option on build?

AFAIK Neil the manual was printed before the decision was made to include the low grip (shorty) parts as standard. So no bits needed as extras.:thumbsup:

Kyosho
28-01-2015, 07:18 PM
If anyone doesn't want their black wheels you can send them to me :thumbsup:

Listen to this Pikey!

cmgreen
28-01-2015, 07:19 PM
Fully agree. Enjoying reading the moaning it's amusing

Agree too, I don't think there will be much performance increase in the kf2, I maybe wrong tho.

scooterboy
28-01-2015, 07:29 PM
Listen to this Pikey!

:p:p:p:p:p:p

gazhillAE
28-01-2015, 07:45 PM
Well i`m selling my KF here and now open to offers as schumacher will only see money from me for tires http://www.oople.com/forums/showthread.php?t=162783

I cant help think it was a 'lets get rid of the original kf great design/layout as the designer no longer works here' might of been said.
I also think its a joke that they include black wheels in the kit but you see very few people running black wheels and the team drivers dont use them.
Either no wheels or white wheel in the kit.
I feel sorry for the people who either got a xmas gift kf, or bought one from xmas money as within less then 5 weeks its out of date:thumbdown::mad:

Ditto, sorry to agree :o
:thumbsup:

badger5
28-01-2015, 07:53 PM
Schumacher have confirmed that all parts needed to run with a shortie in the low grip configuration are in the kit. I guess they made a last minute change and included them.

Adam F
28-01-2015, 07:54 PM
You think Schumacher can design, test, tool and manufacture a "new" car in the time since Tom handed in his notice?.... What planet are you on?

Whilst I don't think the new car is a huge leap forward over the old one, the whole "They did it out of spite because TC left" is a bit daft...

neallewis
28-01-2015, 08:06 PM
AFAIK Neil the manual was printed before the decision was made to include the low grip (shorty) parts as standard. So no bits needed as extras.:thumbsup:

That's a bit better then for sure :-)

tyreman
28-01-2015, 08:12 PM
Just added the stainless steel screw kit to the website.
http://screwz4rc.co.uk/product/schumacher-cougar-kf2/
:thumbsup:

Danosborne6661
28-01-2015, 08:20 PM
There are some very funny claims in this thread! :lol:

All in all, this is going to be a fantastic car. There are a lot of new refinements to this car that will make a big difference. We have to appriciate that this car is also designed in the United Kingdom! This is a QUALITY product complete with many machined and finely made parts by Schumacher themselves.

We also have to compare the KF2 to the stock KF. If you were to buy a stock KF you would have to then buy the low grip conversion and the alloy chassis to make it anything like this KF2. It's quite clear that the idea behind the KF2 is that the KF had so many developments that they have now released it as a complete package, added with a load of other new upgrades too!

For those being sympathetic to those that may have recently purchased a KF, they still have a fantastic car and they'll still have just as good a chance of beating their mate with a KF2. In all retail industries there are always people that may of purchased the current model the day before with a new one to be released the following day... from TV's, iPhones or even full size cars! Imagine if you just bought a Lamborghini Gallado for the Huracane to be realeased the following day... it happens.

It's not like this release was a HUGE secret either... it didn't take more than a few brain cells to work out that the KF had some new upgrades released for it to be worthy of a new model.

I personally can't wait to get my KF2, and thank you Schumacher for keeping British engineering going and releasing another quality product. :thumbsup:

neallewis
28-01-2015, 08:30 PM
You think Schumacher can design, test, tool and manufacture a "new" car in the time since Tom handed in his notice?.... What planet are you on?

Whilst I don't think the new car is a huge leap forward over the old one, the whole "They did it out of spite because TC left" is a bit daft...

As I understand it (and I don't know much), Tom left Schumacher on good terms as he got a new job, which will further his career in engineering outside of RC. It's a good move for him and I'm sure he'll be missed by the Schumacher team. The fact he's now racing with Yokomo is because he wants to continue racing his hobby at a competitive level without the "work" ties to the old place. Got to respect that and good luck to him.

It's been no secret that Schumacher were refreshing the KF platform, as they (and other manufacturers do) in line with a product lifecycle. The new car is a evolution of the old one based on what they know works, what makes sense to keep (from a production point of view), and what worked better in the testing Tom and other team racers have done over it's life. While some changes are a departure from what existed, other parts are common which doesn't totally obsolete anyone investment in the KF. If you had when it first came out (early adopter), you've had good use and probably got many options that will transfer to the new car, or you sold it in preparation. That buyer will have a new platform (to them) which they can enjoy knowing that parts are still available and its not too far away from the current car that the early adopters will now go and run.

Any company (not just in RC) has to find a balance to keep a product fresh and current enough to drive continued sales, and I think Schumcher have done well with the KF and will continue to do well with the KF2, having the lifecycle right so unwanted stuff isn't left unsold.
No one can dispute the KF was and still is a cracking racing platform, and it looks to continue with the KF2. Good to see from a Great British company in this tough and ever changing market place.

neallewis
28-01-2015, 08:32 PM
There are some very funny claims in this thread! :lol:

All in all, this is going to be a fantastic car. There are a lot of new refinements to this car that will make a big difference. We have to appriciate that this car is also made in the United Kingdom! Schumacher aren't firing their designs over to be cheapily made in China, this is a QUALITY product complete with many machined and finely made parts.

We also have to compare the KF2 to the stock KF. If you were to buy a stock KF you would have to then buy the low grip conversion and the alloy chassis to make it anything like this KF2. It's quite clear that the idea behind the KF2 is that the KF had so many developments that they have now released it as a complete package, added with a load of other new upgrades too!

For those being sympathetic to those that may have recently purchased a KF, they still have a fantastic car and they'll still have just as good a chance of beating their mate with a KF2. In all retail industries there are always people that may of purchased the current model the day before with a new one to be released the following day... from TV's, iPhones or even full size cars! Imagine if you just bought a Lamborghini Gallado for the Huracane to be realeased the following day... it happens.

It's not like this release was a HUGE secret either... it didn't take more than a few brain cells to work out that the KF had some new upgrades released for it to be worthy of a new model.

I personally can't wait to get my KF2, and thank you Schumacher for keeping British engineering going and releasing another quality product. :thumbsup:

Yeah what he^ said :thumbsup:

Kyosho
28-01-2015, 09:01 PM
Does anybody know the advantage of the new diff

neallewis
28-01-2015, 09:28 PM
Does anybody know the advantage of the new diff

Diff is the same as it was in the KF

AntH
28-01-2015, 09:34 PM
You think Schumacher can design, test, tool and manufacture a "new" car in the time since Tom handed in his notice?.... What planet are you on?

Whilst I don't think the new car is a huge leap forward over the old one, the whole "They did it out of spite because TC left" is a bit daft...

Once upon a time, I told somebody that for a living I worked in a team designing and testing car headlamp assemblies and wiper systems, amongst other bits. They asked me what I did the other 51 weeks of the year.

Squidzilla
29-01-2015, 12:23 AM
Looks really nice, not a massive leap from the KF, just tidying up all the odds and ends, Shame they didnt include the alloy rear uppers, in my opinion that is all that is missing from this kit.

I think they will need another driver like Tom to keep posting their setups and seen trackside to achieve the success they did with the KF though. While there are plenty of drivers out there with KF's under Schumachers banner, Toms constant set ups and appearances drove the after kit sales IMO.

Kyosho
29-01-2015, 09:18 AM
Looks really nice, not a massive leap from the KF, just tidying up all the odds and ends, Shame they didnt include the alloy rear uppers, in my opinion that is all that is missing from this kit.

I think they will need another driver like Tom to keep posting their setups and seen trackside to achieve the success they did with the KF though. While there are plenty of drivers out there with KF's under Schumachers banner, Toms constant set ups and appearances drove the after kit sales IMO.

This is how I feel about the car, without team setups and not a massive leap forward we will be raiding our old kfs forthe new one and for £274 I dont think its worth it.

Junior Z
29-01-2015, 10:20 AM
http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-6-620x369.jpg

Danosborne6661
29-01-2015, 10:47 AM
http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-2.jpg

http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-3.jpg

http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-4-620x356.jpg

http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-5-620x392.jpg

Optional carbon chassis and carbon fan mount
http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-6-620x369.jpg

Source - http://www.rc-news.de/wp-content/uploads/2015/01/Spielwarenmesse-2015-Schumacher-Cougar-KF2-2WD-Mittelmotorbuggy-6-620x369.jpg

rdr
29-01-2015, 11:43 AM
loosing the front top deck would not be my first choice having lost a front end when run without it, but there's scope for a new front deck with the fan mount to be made.

KentH
29-01-2015, 11:47 AM
Num Num Num.....:D

Danosborne6661
29-01-2015, 11:48 AM
loosing the front top deck would not be my first choice having lost a front end when run without it, but there's scope for a new front deck with the fan mount to be made.

It has metal braces on the outside for strengthening.

neallewis
29-01-2015, 11:52 AM
loosing the front top deck would not be my first choice having lost a front end when run without it, but there's scope for a new front deck with the fan mount to be made.

That's actually a good idea. I guess they figured the front top deck is not needed with the alloy chassis and side braces?

Kelk
29-01-2015, 12:12 PM
I have a low grip chassis KF and I think it's great, I really do. Parts of it are getting a little tired to say the least and I love building kits almost as much as racing them so this is very tempting.

The one question I have as I can't work it out from the pics is...

Putting shorties in and out means either dremeling the side rail or undoing it every time you change the cells between races. Has Schumacher addressed this? I.e. made a side rail that will allow shorties to be moved in and out without taking the car to bits or mod'ing it?

Kyosho
29-01-2015, 01:03 PM
I have a low grip chassis KF and I think it's great, I really do. Parts of it are getting a little tired to say the least and I love building kits almost as much as racing them so this is very tempting.

The one question I have as I can't work it out from the pics is...

Putting shorties in and out means either dremeling the side rail or undoing it every time you change the cells between races. Has Schumacher addressed this? I.e. made a side rail that will allow shorties to be moved in and out without taking the car to bits or mod'ing it?

From the pictures it doesnt look like it unless new side parts in the box:(

Muzzie
29-01-2015, 01:13 PM
AFAIK Neil the manual was printed before the decision was made to include the low grip (shorty) parts as standard. So no bits needed as extras.:thumbsup:

The Schumacher web site say's "Shorty with Optional Parts) " do you need the bits or are they included?

badger5
29-01-2015, 01:50 PM
Schumacher have confirmed by email that all parts required for low grip and a shortie are in included in the kit.

mark christopher
29-01-2015, 02:58 PM
It mentions about the top deck and belt but does that inc the battery straps and the belt layshaft?

Yes it does

mark christopher
29-01-2015, 03:41 PM
I have a low grip chassis KF and I think it's great, I really do. Parts of it are getting a little tired to say the least and I love building kits almost as much as racing them so this is very tempting.

The one question I have as I can't work it out from the pics is...

Putting shorties in and out means either dremeling the side rail or undoing it every time you change the cells between races. Has Schumacher addressed this? I.e. made a side rail that will allow shorties to be moved in and out without taking the car to bits or mod'ing it?


From the pictures it doesnt look like it unless new side parts in the box:(



It's addressed in the low grip kit instructions, remove the side guard. Though I dremeled mine.

badger5
29-01-2015, 08:18 PM
Mark, do you have KF2 already? I notice from the pictures so far released they've missed this area of the offside side pod. I hope you don't have to Dremel or remove the whole side pod just to change cells.

Ross
29-01-2015, 11:09 PM
Mark, do you have KF2 already? I notice from the pictures so far released they've missed this area of the offside side pod. I hope you don't have to Dremel or remove the whole side pod just to change cells.

The exploded diagram shows it all intact, so it need doing. It also looks to come with SV2 rear arms in the kit:thumbsup:

mark christopher
30-01-2015, 09:34 AM
Mark, do you have KF2 already? I notice from the pictures so far released they've missed this area of the offside side pod. I hope you don't have to Dremel or remove the whole side pod just to change cells.

I'm referring to the kf, get mine at weekend, some pics are in LG format I will was if it's pre done

mark christopher
30-01-2015, 10:04 AM
Need to remove the side guard or use my favourite tool

Danosborne6661
30-01-2015, 11:57 AM
Received mine :D Build time tonight!

Richard Law
30-01-2015, 02:29 PM
Now in possession
Skiving off work now
Big thanks to Alex at moss models
😊😊😊😊

Gary29
30-01-2015, 03:10 PM
Post up pics of your builds guys

johnboy
30-01-2015, 05:46 PM
Nice Friday treat my KF is at home for a build.

johnboy
30-01-2015, 05:52 PM
Who does a chassis protector for the KF seen some about on cars

mark christopher
30-01-2015, 06:12 PM
Who does a chassis protector for the KF seen some about on cars

no one for this one
but afun1979 and rcsgraphix

Kyosho
30-01-2015, 06:37 PM
Who does a chassis protector for the KF seen some about on cars

Order an A4 sticker bomb wrap from ebay and draw around your chasis:D

36racing
30-01-2015, 11:47 PM
Who does a chassis protector for the KF seen some about on cars

Hey JohnBoy!
I am receiving my kit tomorrow so we will have a template for the KF2!
(I own Fresh RC, I work with Jon@RCS)

-Josh

hazeandfizz
31-01-2015, 12:23 AM
Few hours into the build and I have to take my hat off to the Schumacher guys, build is going very well and I'm very impressed with the amount of upgrades/new parts.

James

Richard Law
31-01-2015, 12:31 AM
Gutted, going well and part missing in step 4 packet 😡

hazeandfizz
31-01-2015, 04:16 PM
Finished, excellent build. Had a few option parts that I bought for the KF but never fitted so they've been included in the build.

hazeandfizz
31-01-2015, 04:17 PM
Can only post 1 photo at a time!

MikePimlott
31-01-2015, 04:25 PM
Looks good James :thumbsup:

James27
31-01-2015, 04:30 PM
Im looking forward to running mine tomorrow at York!

lee.willows
31-01-2015, 06:50 PM
Hi James, see at York with your new car. Lee

Muzzie
31-01-2015, 11:11 PM
I have a daft question; I want to use shorty packs so I'm building using the low grip conversion option, but the belt doesn't seem long enough? The manual say's belt 103T but the belt in the kit has s3m309 stamped on it. Am I doing something wrong or should I uses the kit belt?

hazeandfizz
01-02-2015, 12:04 AM
Use the belt in the Low Grip kit that is included in the box, it's the only bag that has the Schumacher card on the top. Make sure you've got the motor mount in the rear set of holes, not the ones shown in the instruction manual and follow the instructions that are in with the low grip kit.

Kit belt is only used when you have the motor mount in the forward set of chassis holes.

Hope this helps,
James.

=Muzzie;897993]I have a daft question; I want to use shorty packs so I'm building using the low grip conversion option, but the belt doesn't seem long enough? The manual say's belt 103T but the belt in the kit has s3m309 stamped on it. Am I doing something wrong or should I uses the kit belt?[/QUOTE]

Muzzie
01-02-2015, 11:46 AM
Sorted cheers

Boons
01-02-2015, 08:54 PM
Hi guys.

I've been racing buggies and other stuff on and off over the years and picked up a KF2 yesterday to get back into it :thumbsup:

I'm well out of date with the tech stuff, I'll be racing indoor on AstroTurf and would like to learn how to build the car, as per kit or with adjustments? The manual says 2k diff oil but I know some of the guys at my club with other cars run 5k. I'm looking at a 7.5t motor, so what gearing? Also what's this saddle or shorty pack for low grip etc all about? :blush:

Cheers!

dwp102
01-02-2015, 11:10 PM
Can someone tell me if the old side gears will fit the new car? Also is it not necessarily to run the extra weight with the new car now then? Also are any of the team guys running the graphite chassis? Or is everyone sticking with the alloy one regardless of conditions? Thanks

hazeandfizz
01-02-2015, 11:19 PM
I would build in std kit form to start with and use the low grip chassis option. 24 or 25T pinion with a 7.5 motor. Diff oil wise I've never used anything less than 10,000wt and on very high grip astro indoor I run 20,000wt.

In the kit you have 2 options for battery types, saddle packs or the new style of battery is the shorty and I would recommend going for this option.

Regards,
James.

Hi guys.

I've been racing buggies and other stuff on and off over the years and picked up a KF2 yesterday to get back into it :thumbsup:

I'm well out of date with the tech stuff, I'll be racing indoor on AstroTurf and would like to learn how to build the car, as per kit or with adjustments? The manual says 2k diff oil but I know some of the guys at my club with other cars run 5k. I'm looking at a 7.5t motor, so what gearing? Also what's this saddle or shorty pack for low grip etc all about? :blush:

Cheers!

hazeandfizz
01-02-2015, 11:25 PM
Not sure if the side gears would fit, why would you want to run the old spec gears?

I ran the car today without any extra weight and is was excellent, all the team drivers today used the kit chassis as most will.

James.

Can someone tell me if the old side gears will fit the new car? Also is it not necessarily to run the extra weight with the new car now then? Also are any of the team guys running the graphite chassis? Or is everyone sticking with the alloy one regardless of conditions? Thanks

badger5
02-02-2015, 02:19 AM
Some people (like me) may want to use the high inertia side gears for low grip conditions, and as at the moment there isn't any options available for these and/or already have these hence the question I suspect.

dwp102
02-02-2015, 07:59 AM
Yes that is correct. I use them for tuning quite a lot. In fact I thought it was the best tuning option on the old car, and I for one will not be upgrading until the new car has this option.

Danosborne6661
02-02-2015, 10:18 AM
My builds all complete but here's a few progress photos before I got that :) And what a great build it was! The quality of the parts is bonkers.

Main chassis assembled
http://i.imgur.com/qSNG3gy.jpg

SkyRC/Speed Passion power plant
http://i.imgur.com/kESueWo.jpg

Converted the front to take wheels with bearings, seeing as I have loads and they're YELLOW :D
http://i.imgur.com/38wXYh6.jpg

Rest to follow this week :)

Boons
02-02-2015, 01:27 PM
I would build in std kit form to start with and use the low grip chassis option. 24 or 25T pinion with a 7.5 motor. Diff oil wise I've never used anything less than 10,000wt and on very high grip astro indoor I run 20,000wt.

In the kit you have 2 options for battery types, saddle packs or the new style of battery is the shorty and I would recommend going for this option.

Regards,
James.

Thank you!

So I'll order a Savox 1258, should I get an upgrade servo horn? I must admit I haven't looked in the kit properly yet but I assume the one that comes with it is plastic?

danmurphy
02-02-2015, 02:32 PM
Can someone tell me if the old side gears will fit the new car? Also is it not necessarily to run the extra weight with the new car now then? Also are any of the team guys running the graphite chassis? Or is everyone sticking with the alloy one regardless of conditions? Thanks

I'd be interested to know some of the top guys feedback on additional weight. Looks like the Trishbits side weights still fit beneath the new slipper housing looking at Lloyd Storeys car from the weekend.
Anyone know the weight of the car fully loaded in shorty config?

Kelk
02-02-2015, 05:06 PM
I picked mine up on Friday but haven't started the build yet. Couple of questions for those that have:

1) does the v2 rear suspension kit from the KF1 fit?
2) how are people setting anti-squat at the rear? (high front low rear?)
3) are the titanium turnbuckles worth it? If so is it strength or lightness or both? I never used them on the v1
4) I ran the svr drive shafts on the kf1, are the new ones looking longer than the original kf1's or do I need to use these again?

Boons
03-02-2015, 08:55 AM
Do you guys place the extra shims in the diff or build as per kit and adjust feel with oil weight only?

Muzzie
03-02-2015, 10:06 AM
It's addressed in the low grip kit instructions, remove the side guard. Though I dremeled mine.

Has anyone got a picture of the side guards dremeled? How much do you have to remove?

rossiracer
03-02-2015, 10:16 AM
I cannot understand why people would spend £280 on a car and have to use a dremel to get the battery in poor design if u ask me what happened to the tm2 v2 muzz

AmiSMB
03-02-2015, 11:22 AM
There is a lot to like about the new KF2 but I do feel that the hinge pin braces do not look like they have pill adjustments which I think is a shame and this also means you cannot change the toe in at the rear without a different rear brace. At least you can do anti squat changes by using washers underneath the braces. With the alloy hangars on the K1 and KF this was great to have so much adjustment which I feel has been lost a little.

hazeandfizz
03-02-2015, 12:01 PM
Built as per kit, didn't need the extra shims.

James.

Do you guys place the extra shims in the diff or build as per kit and adjust feel with oil weight only?

hazeandfizz
03-02-2015, 12:05 PM
1. Yes
2. As instructions.
3. Std ones are fine, I've broken Ti ones but never these latest kit ones.
4. Sorry I'm no help on this one.

Regards,
James.

I picked mine up on Friday but haven't started the build yet. Couple of questions for those that have:

1) does the v2 rear suspension kit from the KF1 fit?
2) how are people setting anti-squat at the rear? (high front low rear?)
3) are the titanium turnbuckles worth it? If so is it strength or lightness or both? I never used them on the v1
4) I ran the svr drive shafts on the kf1, are the new ones looking longer than the original kf1's or do I need to use these again?

Muzzie
03-02-2015, 01:02 PM
I cannot understand why people would spend £280 on a car and have to use a dremel to get the battery in poor design if u ask me what happened to the tm2 v2 muzz


Just thought I'd have a change and this is what happen when you walk into Pbm for tyres and there is a shiny new box saying "buy me":lol:

I'm keeping the TM2 v1 and If I dont like it I can sell it and get a new TM2 :thumbsup:.

The build quality of the KF2 is amazing and very well engineered, I just hope the parts are as robust. My only issue it the dremeling. I'm keen to see how it goes on Wed....

Npdp72
03-02-2015, 01:26 PM
4) SVR/KR CVD driveshafts fit the KF2 fine, just as they do the KF.

1. Yes
2. As instructions.
3. Std ones are fine, I've broken Ti ones but never these latest kit ones.
4. Sorry I'm no help on this one.

Regards,
James.

I picked mine up on Friday but haven't started the build yet. Couple of questions for those that have:

1) does the v2 rear suspension kit from the KF1 fit?
2) how are people setting anti-squat at the rear? (high front low rear?)
3) are the titanium turnbuckles worth it? If so is it strength or lightness or both? I never used them on the v1
4) I ran the svr drive shafts on the kf1, are the new ones looking longer than the original kf1's or do I need to use these again?

Kelk
03-02-2015, 05:38 PM
Thanks for the answers guys

hazeandfizz
03-02-2015, 09:25 PM
Here you go.

Has anyone got a picture of the side guards dremeled? How much do you have to remove?

James27
03-02-2015, 09:50 PM
Has anyone got a picture of the side guards dremeled? How much do you have to remove?


I run a weight under my shorty and my lrp are slightly swollen so I've had to dremel quite a lot!

Boons
03-02-2015, 09:58 PM
Crikey, I was going to run shortys but not sure I want to massacre my chassis. Saddles it may have to be!

hazeandfizz
04-02-2015, 08:26 AM
It's only the plastic side rail and hardly a massacre.

Crikey, I was going to run shortys but not sure I want to massacre my chassis. Saddles it may have to be!

Muzzie
04-02-2015, 11:33 AM
Here's a picture of mine built, I may need to trim more off the side rail as the shorty is still a bit tight.

What shock oil have people used?

I've put the kit shock oil in the rear (it doesn't look or feel like 35WT) and 37.5WT in the front.

hazeandfizz
04-02-2015, 11:49 PM
I'm running core oils,

Low grip 450/350 rear.
High grip 550/450 rear.

James.

Here's a picture of mine built, I may need to trim more off the side rail as the shorty is still a bit tight.

What shock oil have people used?

I've put the kit shock oil in the rear (it doesn't look or feel like 35WT) and 37.5WT in the front.

Muzzie
05-02-2015, 09:47 AM
I ran the car (indoor carpet) for the first time last night and I have to say the car felt good, a bit edgy and very direct. It felt easier to drive the harder I pushed – This is good

Things I changed from kit:

30 wt / 350 in the rear shock 37.5 / 450 in the front
Short wheel base
Rear Shock on the outer hole on the wish bone

However, I did suffer from what we call at my club as the ‘Schumacher curse’. This is the third car I’ve built but the first car to fall apart. It may have been me being a gentleman sausage, but I have now brought some industrial strength lock tight LOL.

So for people who have never built a Schumacher before remember; lock tight, lock tight, lock tight……

Question – Can’t get the ride height on the rear any lower then 20mm?

steveproracing
05-02-2015, 10:46 AM
You need the alloy spring seats to get rear ride height bellow 20mm.
Not ideal I know but it's how the team do it!

badger5
05-02-2015, 11:28 AM
If you're going to use some threadlocker don't go to mad with it. If it's Loctite the second number in the three digit product code will tell you how strong it is, if it's 221 or 222 this is low strength, if it's 24 something this is medium and more than you'll ever need on an RC model, if it's 27 something then let's just call it permanent fixture and you'll need heat to release it.

I personally use 248 which comes in a nice Pritt Stick type applicator which makes it much easier to control how much you apply. You can get it from Halfords.

Muzzie
05-02-2015, 11:55 AM
If you're going to use some threadlocker don't go to mad with it. If it's Loctite the second number in the three digit product code will tell you how strong it is, if it's 221 or 222 this is low strength, if it's 24 something this is medium and more than you'll ever need on an RC model, if it's 27 something then let's just call it permanent fixture and you'll need heat to release it.

I personally use 248 which comes in a nice Pritt Stick type applicator which makes it much easier to control how much you apply. You can get it from Halfords.


Thanks for the advice :thumbsup:

wingers
05-02-2015, 12:45 PM
You need the alloy spring seats to get rear ride height bellow 20mm.
Not ideal I know but it's how the team do it!

There are a lot of variables that go into this. I've run mine down to 17mm with std shock cups, but I run zero rebound in the dampers. I'm also on soft springs which are going to sag a bit more.

With the V2 alloy gearbox uppers you can also modify the shock tower height which affects the min ride height.

Wingers

CARB
05-02-2015, 06:02 PM
I have built several Schumachers and have never used thread lock on any of them and never had a part fall over either, The red stuff they put in the kit is super strong so be warned if you want to get things a part in a rush.

The blue stuff from loctite is a much softer version so try that if you must, better to just keep things tight especially after a crash as this stretches the screws which then become lose.

Ritchie T
06-02-2015, 02:22 AM
You need the alloy spring seats to get rear ride height bellow 20mm.
Not ideal I know but it's how the team do it!

:eh?:

badger5
06-02-2015, 05:27 AM
With the KF you could run with the rear suspension in either low or high position or a mixture of the two with the alloy blocks, will we be able to shim the suspension hangers to achieve this? And where is the KF2 stock setting compared to the KF's high and low positions?

badger5
06-02-2015, 05:33 AM
I have built several Schumachers and have never used thread lock on any of them and never had a part fall over either, The red stuff they put in the kit is super strong so be warned if you want to get things a part in a rush.

The blue stuff from loctite is a much softer version so try that if you must, better to just keep things tight especially after a crash as this stretches the screws which then become lose.

Strange your if findings, I'm not sure what the stuff is in the Schumacher bottles but as a general rule of thumb for threadlock red is low strength (221 etc) blue is medium (243 etc) and green is high strength (270).

Ritchie T
06-02-2015, 02:17 PM
You need the alloy spring seats to get rear ride height bellow 20mm.
Not ideal I know but it's how the team do it!

http://i91.photobucket.com/albums/k292/mixtapesuk/DSC_0053.jpg

17mm with plastic shock bottom

(i could wind the shock collars down another 10 laps aswell)

Pedders
06-02-2015, 02:53 PM
Is the kf2 good out of the box or does it need extra hot up parts to make it competitive?? Recommended extras??

Thanks.

Muzzie
07-02-2015, 10:09 AM
What parts do I need to mount the shocks on the rear of the wish bone?

Npdp72
07-02-2015, 10:33 AM
What parts do I need to mount the shocks on the rear of the wish bone?

Just these:
http://www.racing-cars.com/pp/New_Cars_and_Parts/Cougar_KF2/U4616.html

johnboy
07-02-2015, 11:23 AM
You need the alloy spring seats to get rear ride height bellow 20mm.
Not ideal I know but it's how the team do it!

Steve lad were you sniffing superglue fumes while writing this post :p

steveproracing
07-02-2015, 05:50 PM
Nope I was told by a high level sponsored driver from York that in certain shock positions and spring rates the only way to get bellow 20mm without changing setup is to use the alloy bottoms. I've not built my car yet so can neither prove or disprove the info I was given, but I trust the guy who gave me the info more than I would most people on here

Boons
08-02-2015, 08:22 PM
Built mine, just the electrics and paint to go. I was a bit suprised to find the whole front end inc steering is plastic, and not even a front wishbone brace. Maybe I'm too out of date with buggies as I haven't built one for a long time.

Very nice though and I'm looking forward to running it :thumbsup:

Danosborne6661
08-02-2015, 10:21 PM
Ran mine at Mendip R/C Raceway today with an out the box set-up and it was rapid! All I did was the following

- Leaned the shocks in on the towers all round
- 90g added under the lipo
- Flipped the front arms left to right
- 20mm ride height all round
- 1 degree camber all round
- Slight amount of toe-in up front
- Fair amount of slipper which worked amazing on the new assembly.

I also tried increasing the anti-squat to 3 degrees and changed to long wheelbase but wasn't much of a fan of either of these!

All in all it was very quick and us KF2's took all the top 3 places at Mendip today :)

Boons
09-02-2015, 10:51 AM
Which alloy servo horn (25t) would you guys recommend?

shark
09-02-2015, 11:09 AM
Core one ;)

knighthawk
09-02-2015, 11:10 AM
Which alloy servo horn (25t) would you guys recommend?
Personally none,

I'd rather break a plastic horn than a £50+ servo.

The horn is the weakest point, if you put an alloy horn on the damage transfers to the next weakest point, normally the servo. IMHO

KentH
10-02-2015, 01:28 PM
I have just finished building my KF2, and now its time to get the electronic in the car.
I have been using Saddle-pack in my KF but I really wanted to try out the shorty, then the KF2 came out, so my question is: Are the shorty still a good option to the KF2? Or do the KF2 drive way better with saddle sins it have a different geometry?

Q2: If Shorty which dimensions shall I look for ?

Danosborne6661
10-02-2015, 01:48 PM
All the KF2's I've seen at our local club have been built with shortys. There seems to be a nice lot of room for the shorty so I imagine any short will go in no problem.

hazeandfizz
10-02-2015, 08:37 PM
Most drivers in the UK are running shorty low grip setup as it works so very well in all conditions.

Dimensions (LxWxH): 95.5x46.5x24.9mm

Regards,
James.


I have been using Saddle-pack in my KF but I really wanted to try out the shorty, then the KF2 came out, so my question is: Are the shorty still a good option to the KF2? Or do the KF2 drive way better with saddle sins it have a different geometry?

Q2: If Shorty which dimensions shall I look for ?[/QUOTE]

Muzzie
10-02-2015, 08:49 PM
I'm still struggling to get the ride height lower than 20mm, is there any way of lowering the car using the kit springs and shock bottoms?

Didn't want to buy more bling as I've already brought the alloy hub carriers and rear shock mount conversion kit.

Ritchie T
10-02-2015, 09:35 PM
Talk us through how your building them and what youre using

Boons
11-02-2015, 08:27 AM
Regarding The belt tension, do you slide the adjuster just until it takes up the slack, or tighter?

Forgive me, I haven't built a car with a belt since my new Pro Cat :wub

Danosborne6661
11-02-2015, 09:20 AM
My ride height goes way below 20mm! But I do have my shocks on the back which I suppose could make a difference...

h0m3sy
11-02-2015, 01:45 PM
Regarding The belt tension, do you slide the adjuster just until it takes up the slack, or tighter?

Forgive me, I haven't built a car with a belt since my new Pro Cat :wub

Run the belt on the tight side

bigred5765
11-02-2015, 01:56 PM
Just made some side pod weights to fit the kf and kf2
link here (http://www.oople.com/forums/showthread.php?t=163543)

johnboy
11-02-2015, 03:27 PM
Just made some side pod weights to fit the kf and kf2
link here (http://www.oople.com/forums/showthread.php?t=163543)

carl just dropped you a pm ref the weights

KentH
11-02-2015, 06:04 PM
Just made some side pod weights to fit the kf and kf2
link here (http://www.oople.com/forums/showthread.php?t=163543)


SWEET :D like!

Thomas B
11-02-2015, 11:01 PM
Do you have same setup on KF2 as on KF?

Chris Elworthy
12-02-2015, 08:02 AM
Has anybody actually run the car yet? What do you all think in comparison with the original KF?

Any setup ideas?



Chris

hazeandfizz
12-02-2015, 08:31 AM
Chris,

I've run my car twice now and I'm very pleased with it. My KF never had the alloy LG chassis fitted so It's a little difficult for me to do the compare but running against people of similar ability with std KF's I do seem to have gained pace.
Steve Brown ran his at Torch on Sunday and was very quick, he also felt the car had more speed.

At present I'm running a very similar setup.

Hope this info helps!
James.

Has anybody actually run the car yet? What do you all think in comparison with the original KF?

Any setup ideas?



Chris

dwp102
12-02-2015, 08:37 AM
Is it possible to run the new slipper on the old car?

Muzzie
12-02-2015, 12:34 PM
Talk us through how your building them and what youre using


Rear shocks are kit, 3 hole pistons, 30wt oil, red spring and plastic shock bottoms.

I've brought the conversion kit to mount the shocks on the rear.

20mm ride height ????

What am I doing wrong?

hazeandfizz
12-02-2015, 12:48 PM
I think the Core springs which are included in the KF2 kit are longer than the original Schumacher springs.

If you need RH lower than 20mm I think you need, Schumacher springs or alloy spring cups or K1 rear tower.

James.

Rear shocks are kit, 3 hole pistons, 30wt oil, red spring and plastic shock bottoms.

I've brought the conversion kit to mount the shocks on the rear.

20mm ride height ????

What am I doing wrong?

Boons
12-02-2015, 01:42 PM
So what ride height should I be looking for all around for use indoor on astro?

shark
12-02-2015, 01:58 PM
Get mine way lower than 20mm using core springs and kit spring cups , shocks on rear........ Pass !

johnboy
12-02-2015, 02:02 PM
Finally finished mine now puck drive system arrived.
Couple of things the quality of the build is excellent as you would expect.
Some small niggling issues though. Having to dremel the sidepod so can gain access to the shorty lipo come on schumacher do a proper one and with all the nice black parts why the grey ball cups could have been black lol.
I'm looking forward to giving the car a run this weekend

danmurphy
12-02-2015, 02:52 PM
Rear shocks are kit, 3 hole pistons, 30wt oil, red spring and plastic shock bottoms.

I've brought the conversion kit to mount the shocks on the rear.

20mm ride height ????

What am I doing wrong?

Sounds to me like you're building them with too much rebound (too much oil). If you compress the shaft with the spring off and let go, how far does the shaft come back down?

Ritchie T
12-02-2015, 04:53 PM
Rear shocks are kit, 3 hole pistons, 30wt oil, red spring and plastic shock bottoms.

I've brought the conversion kit to mount the shocks on the rear.

20mm ride height ????

What am I doing wrong?

Tell us how you build them step by step.

Boons
12-02-2015, 08:48 PM
Guys, not sure if I'm being a complete tool, but that rubber o ring on the hex, is it supposed to go inbetween the hex and hub or to go on the actual hex to hold the pin in?

Cheers!

johnboy
12-02-2015, 09:02 PM
Guys, not sure if I'm being a complete tool, but that rubber o ring on the hex, is it supposed to go inbetween the hex and hub or to go on the actual hex to hold the pin in?

Cheers!

Holds the pin in place for the hex

Boons
12-02-2015, 10:05 PM
Holds the pin in place for the hex

Thank you!

Boons
15-02-2015, 08:07 PM
Hi guys.

I want to chuck some spare front wishbones in the box, question is do I go for kit or the med flex ones? It's indoor on astro if that's relevant.

Cheers!

Ross
15-02-2015, 08:21 PM
Hi guys.

I want to chuck some spare front wishbones in the box, question is do I go for kit or the med flex ones? It's indoor on astro if that's relevant.

Cheers!

Is it silverstone you will be racing at, if so I would say the kit arms are fine.

Boons
15-02-2015, 08:43 PM
Is it silverstone you will be racing at, if so I would say the kit arms are fine.

It's Deanshanger :D

hazeandfizz
15-02-2015, 11:04 PM
Std wishbones are fine for TCRCC, are you going to the next winter series date? If so pop over and say hello and we can talk through any questions you have.
Regards,
James.

It's Deanshanger :D

jonathan may
17-02-2015, 02:40 PM
does the kf2 come with wheels in the kit still ?

Kyosho
17-02-2015, 06:13 PM
does the kf2 come with wheels in the kit still ?

Yes Jon
Black ones! Ill have them if you dont want them.:lol:

Muzzie
17-02-2015, 06:13 PM
Yes black wheels

Boons
18-02-2015, 01:39 PM
I think the Core springs which are included in the KF2 kit are longer than the original Schumacher springs.

James.

I'd love to know if this is the case?

Boons
18-02-2015, 02:35 PM
I'd love to know if this is the case?

The guys at MB Models have just very kindly lined up a set of the kit supplied Core rear springs next to a set of Schumacher springs of the same poundage and the Schumacher ones were shorter :thumbsup:

Muzzie
20-02-2015, 09:11 AM
Has anyone tried the base carpet setup as per the manual?

With this setup was the rear shocks mounted on the front or rear of the wish bone?

I don’t have 5 deg yokes are these worth getting?

Boons
21-02-2015, 06:30 PM
Bent chassis from a fairly mild shunt :thumbdown:

mark christopher
21-02-2015, 06:59 PM
I'd love to know if this is the case?

yup always have been

mark christopher
21-02-2015, 07:03 PM
Finally finished mine now puck drive system arrived.
Couple of things the quality of the build is excellent as you would expect.
Some small niggling issues though. Having to dremel the sidepod so can gain access to the shorty lipo come on schumacher do a proper one and with all the nice black parts why the grey ball cups could have been black lol.
I'm looking forward to giving the car a run this weekend

supposed to take it off to get lipo out, and the grey pro sockets are stiffer than the black ones they do

bigred5765
21-02-2015, 07:34 PM
made a few more kf2 side pod weights
http://i1164.photobucket.com/albums/q568/carl5765igred5765/CARL5765-HP/Pictures/GECKORC%20PICS/large211_zpsff50242e.jpg http://i1164.photobucket.com/albums/q568/carl5765igred5765/CARL5765-HP/Pictures/GECKORC%20PICS/large196_zpsd274f174.jpg let me no if your interested
have some on Here (http://www.ebay.co.uk/sch/geckorc2015/m.html?_nkw=&_armrs=1&_ipg=&_from=)and Here (http://www.geckorc.co.uk/storev2/open-product.php?page=viewproduct&product=hop-ups-and-bling-schumacher-cougar-kf-kf2-side-pod-wieghts)

Boons
22-02-2015, 01:29 PM
Indoor on astro do you want the kit or 5 degree front yokes?

Sir Shawny500
22-02-2015, 01:49 PM
Bent chassis from a fairly mild shunt :thumbdown:

What happened to cause that?? First time I took my K1 aero out I delaminated my chassis and shattered the top deck. It was a full speed crash into a solid post after someone dropped shock oil all over the polished wooden floor.:thumbdown:

Boons
22-02-2015, 10:23 PM
Caught the rear wheel which snapped the hub. I wouldn't have thought it would bend the chassis though!

Boons
22-02-2015, 10:24 PM
Does any firm do an alloy brace/nose for the front end?

Sir Shawny500
22-02-2015, 10:37 PM
Caught the rear wheel which snapped the hub. I wouldn't have thought it would bend the chassis though!

Ouch! Thought it came with a carbon chassis.

dwp102
22-02-2015, 10:54 PM
Were the fast schumacher guys still using the alloy chassis at worksop today?

Boons
23-02-2015, 08:14 AM
Ouch! Thought it came with a carbon chassis.

The carbon is an option

cmgreen
23-02-2015, 11:40 AM
Caught the rear wheel which snapped the hub. I wouldn't have thought it would bend the chassis though!

To be fair that would be a big hit to bend the chassis!

mark christopher
23-02-2015, 06:59 PM
Were the fast schumacher guys still using the alloy chassis at worksop today?

yes they were

dwp102
23-02-2015, 07:17 PM
yes they were

Interesting. Thanks.

Ross
04-04-2015, 01:13 PM
So it's been out for a while, are the guys that run the KF and bought KF2 noticing a difference between the two cars, is one easier to drive than the other on a similar set up.

Basically is it worth changing to the 2.

CARB
04-04-2015, 03:00 PM
I do not know if it is a better car or not I have one for sale, used once £200.00 Free posting.
email [email protected]

hazeandfizz
04-04-2015, 07:43 PM
Ross,

To be honest when I was building the car I couldn't see how it would give me any more performance over the old KF. I have be pleasantly surprised with the extra speed the car has given me and as mentioned before the new design is much simpler. It's a better car, the end!

Regards,
James.

QUOTE=Ross;906944]So it's been out for a while, are the guys that run the KF and bought KF2 noticing a difference between the two cars, is one easier to drive than the other on a similar set up.

Basically is it worth changing to the 2.[/QUOTE]

Ross
04-04-2015, 09:06 PM
:thumbsup: nuff said, thanks James.

Looks like I better sell some stuff :woot:



Ross,

To be honest when I was building the car I couldn't see how it would give me any more performance over the old KF. I have be pleasantly surprised with the extra speed the car has given me and as mentioned before the new design is much simpler. It's a better car, the end!

Regards,
James.

QUOTE=Ross;906944]So it's been out for a while, are the guys that run the KF and bought KF2 noticing a difference between the two cars, is one easier to drive than the other on a similar set up.

Basically is it worth changing to the 2.[/QUOTE]

honrico Diablo
01-04-2016, 11:30 PM
Bent chassis from a fairly mild shunt :thumbdown:

Mines bent in the same spot. Caught the rear corner, ripped the wheel off. Wishbone intact, chassis bent allowing the pivot pin to pop out. . Mines the third KF2 to do this at our club!