View Full Version : K1 Understeer
Sir Shawny500
09-02-2015, 12:21 AM
I'm racing on polished wood floors and carpet at the moment and finding it hard to setup my K1aero. The main problem is apex and exit understeer!!! So was hoping someone may have an idea. Thanks
neallewis
09-02-2015, 12:41 AM
I'm racing on polished wood floors and carpet at the moment and finding it hard to setup my K1aero. The main problem is apex and exit understeer!!! So was hoping someone may have an idea. Thanks
Have a chat with James and Issac Mcfadyean at Batley Shawn. They run the same car.
h0m3sy
09-02-2015, 11:36 PM
Try increasing the front and rear camber to 2*, run 1* toe in on the front and shorten the rear camber link or lower the inside rear ball stud.
Sir Shawny500
10-02-2015, 06:25 AM
Thanks for your help guys.
Jabber
10-02-2015, 09:53 AM
What tyres are you using? and do you have the gear diffs front and rear?
Sir Shawny500
10-02-2015, 01:11 PM
What tyres are you using? and do you have the gear diffs front and rear?
Using yellow mini pins front and rear and yep running gear diffs. But my ball diffs arrive tomorrow and been told that they make a massive difference.
Jabber
10-02-2015, 11:38 PM
Try the diffs and see what its like. I ran the ball diff just in the front with a gear diff in the rear and it certainly made it easier to drive and more predictable. Have not changed the car set up wise and it works well at most tracks we go to indoors. Did try the ball diff in the rear on Sunday at Worksop after two rounds and the car looked a touch easier to drive and Isaac did say it was and his times were improved. If your at Chadderton on Sunday i will be more than happy to have a look and help if i can. Cheers.
Sir Shawny500
11-02-2015, 01:35 PM
Try the diffs and see what its like. I ran the ball diff just in the front with a gear diff in the rear and it certainly made it easier to drive and more predictable. Have not changed the car set up wise and it works well at most tracks we go to indoors. Did try the ball diff in the rear on Sunday at Worksop after two rounds and the car looked a touch easier to drive and Isaac did say it was and his times were improved. If your at Chadderton on Sunday i will be more than happy to have a look and help if i can. Cheers.
Thanks for your help. I won't get to Chadderton but may catch you a Batley. Thanks again
Sir Shawny500
11-02-2015, 04:46 PM
Try the diffs and see what its like. I ran the ball diff just in the front with a gear diff in the rear and it certainly made it easier to drive and more predictable. Have not changed the car set up wise and it works well at most tracks we go to indoors. Did try the ball diff in the rear on Sunday at Worksop after two rounds and the car looked a touch easier to drive and Isaac did say it was and his times were improved. If your at Chadderton on Sunday i will be more than happy to have a look and help if i can. Cheers.
I've now got the ball diffs in!! Thanks to Alex at Moss Models for getting them to me so quick. So going to try the car out at Cullingworth this Friday. I have also knocked 1 degree of rear toe-in off to loosen up the rear end. Thanks everyone for your help:thumbsup:
h0m3sy
16-02-2015, 10:48 PM
How did you get on with the ball diffs? What other changes did you make?
Sir Shawny500
16-02-2015, 10:55 PM
How did you get on with the ball diffs? What other changes did you make?
A lot better with ball diffs in and took off 1 degree of toe in off the rear. Ride height was 18mm all round with 1 degree of negative camber on all for corners. No power on understeer at all that I noticed.
h0m3sy
16-02-2015, 11:02 PM
A lot better with ball diffs in and took off 1 degree of toe in off the rear. Ride height was 18mm all round with 1 degree of negative camber on all for corners. No power on understeer at all that I noticed.
Happy Days :)
Sir Shawny500
16-02-2015, 11:19 PM
Happy Days :)
Yep!!! I just need to get better now to do the car justice :woot:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.