PDA

View Full Version : Schumacher Cougar SF


Oliv996
24-03-2015, 08:12 PM
Here is my project i started a few months ago,its based on the idea of combining a Cougar KF/KR front end and a Cat SX rear end.

After seeing the new Yokomo YZ-2 released,with the all flat style transmission, i was reminded of the rear transmission of a Cat SX. My old Cats SX was still sleeping in its box,so after dusting it off i looked at it and imagined how i could combine the two car elements together.

I started by taking measurements of both cars and began the design process in Solidworks. I've taken advantage of using some parts directly from the YZ-2

Z2-118P: Yokomo graphite battery plate
Z2-118FS: Yokomo battery foam set
Z2-118S: Yokomo battery spacer
Z2-118PN: Yokomo battery post and nut set
Z2-101: Yokomo yZ2 body


My inspiration is taken from the design of the YZ-2,and its weight distribution which allows for either shorty or saddle lipo's. By using the complete front end of a Cougar KF/KR and the complete rear end of a Cat SX i have been able to keep the conversion parts needed to a minimum, these are as follows:


Carbon Chassis
Side guards
Motor waterfall
Front Top deck connecting plate


These are the specific parts needed for this conversion.

Below are the pictures of the first assembly where only motor waterfall part is missing on the chassis

Link to my Imgur (http://oliv996.imgur.com)

Thanks to David Holmes who helps me for translation :thumbsup:

MHeadling
25-03-2015, 09:07 AM
Wow nice work! :thumbsup:

cornishboy176
25-03-2015, 09:38 AM
That looks awesome, be good to hear how it goes!

Lee24h
25-03-2015, 09:48 AM
Top work looks like a proper factory car

Oliv996
25-03-2015, 01:06 PM
I will post more pics once the complete car is ready

KentH
25-03-2015, 01:54 PM
what a nice job you have done...:)
true engineering :)

Oliv996
26-03-2015, 09:38 AM
I confess, I'm a engineer, nobody's perfect :(

Oliv996
05-04-2015, 07:40 AM
Post update with:

Purple anodize pulled off parts
CAT SX3 slipper adapted
CAT SX3 outside metal gear adapted
SV2 rear arms mounted


http://i.imgur.com/u43r0yRh.jpg (http://imgur.com/u43r0yR)

http://i.imgur.com/xzpzL7ph.jpg (http://imgur.com/xzpzL7p)

http://i.imgur.com/4y23MEfh.jpg (http://imgur.com/4y23MEf)

Treedudeben
05-04-2015, 10:36 AM
Looks totally amazing, I've often thought about making a KM (a KF with a SV2 rear end). Please let us know how it drives once it's up and running. :thumbsup:

knighthawk
05-04-2015, 11:33 AM
Really like the look of this project, one question though, why are you no using the Schuy Shocks ?

Oliv996
05-04-2015, 04:01 PM
Thanks :)

I did not mount Schuy shocks because the only I got are coming from SX1 (so not bigbore and were crappy). I'm addicted to Kyosho BB model and I've setup for them always in mind. Thus, instead of buying Schuy ones I prefer to mount K ones.

Oliv996
08-04-2015, 01:15 PM
Electronic install done. I can't wait to test:

http://i.imgur.com/zV9xCIMh.jpg

http://i.imgur.com/BPgFzgEh.jpg

http://i.imgur.com/n1Fk1GMh.jpg

lcpvcce
13-04-2015, 12:38 PM
Great job I want one .................. :thumbsup::thumbsup::thumbsup:

rdr
13-05-2015, 09:59 PM
Looks totally amazing, I've often thought about making a KM (a KF with a SV2 rear end). Please let us know how it drives once it's up and running. :thumbsup:Here it is......http://www.oople.com/forums/showthread.php?t=150887

rdr
13-05-2015, 10:04 PM
I'm currently making an all schumacher version of your sx based car, similar to the km i made.

Treedudeben
05-06-2015, 07:04 PM
Please could you tell me which part you used to connect the carbon top deck to the front bulkhead?

Many thanks Ben.

boysdontcry
06-06-2015, 07:14 AM
This is a 3d print part.

micholix
06-06-2015, 06:38 PM
Oliver, that is an awsom looking car, well done!:drool:

Did you have the chance, to drive it and if, how does it handle?

Treedudeben
08-06-2015, 05:31 AM
This is a 3d print part.

Is there any way of buying one?