PDA

View Full Version : Turnigy trackstar 120a turbo esc issue?


Stickygeko
09-04-2015, 02:01 PM
Hi everyone,


Im currently running a Turnigy trackstar 120a turbo esc with an Orca rx2 8.5t - I used to run the SP reventon R with SP 8.5t

Recently I have been losing control of my car... fail safe is set and working.
However mid race the car shoots off full throttle and i cant stop it.

this doesnt happen every race... but is happening more frequently... i set the dead zone to a high level which initially seemed to help.. but back to square 1

and ideas why this is happening?

all wires are connected, non are touching etc, all batteries are ok

spindles69
09-04-2015, 02:49 PM
Nothing to do with the esc sounds like it's more likely to be a tx rx problem.

Stickygeko
09-04-2015, 03:26 PM
Nothing to do with the esc sounds like it's more likely to be a tx rx problem.

The tx is a standard TD dex210 RTR one which is less than a year old. Ive ordered a new tx so will give that a go and hopefully that'll resolve the issue.

qatmix
09-04-2015, 05:37 PM
Plug a power cap in the receiver. It sounds like it's browning out. That should sort it.

Stickygeko
10-04-2015, 11:59 AM
Plug a power cap in the receiver. It sounds like it's browning out. That should sort it.


I will try that, I installed a new transmitter and RX but it still shot off.

something like this ?

http://www.ebay.co.uk/itm/Etronix-Power-Cap-ET0077/371297218566?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D20140107083358%26meid%3D9aba090494814728b04 5ba830169f1d8%26pid%3D100011%26rk%3D2%26rkt%3D7%26 sd%3D281342443691

qatmix
10-04-2015, 02:32 PM
Yep I use one of those in my Stockcar as my KO also had the same issue you described.

chris24jt
11-04-2015, 07:28 PM
ive had the same issue with the speedo but to a lesser extent, ive not tried a power cap yet so be good to know if it works :)

wookieewonder
11-04-2015, 08:24 PM
I've had the same problem with this esc but only a quick squirt Of full throttle kind of glitch that only lasts for a second. It was really bad at 1% dead band on esc. Better but still there on 3% (default) and totally fine on 5%. Tried a power cap , still had issue so fitted a external bec to power servo and rx. Also i have switched off theremal cut off and Lipo low voltage protection. car is now fine. Have you recently upgraded to a more powerful servo?

I think it was dead band mostly but the other changes seed to help too

daz75
12-04-2015, 04:08 PM
I've had the same problem with this esc but only a quick squirt Of full throttle kind of glitch that only lasts for a second. It was really bad at 1% dead band on esc. Better but still there on 3% (default) and totally fine on 5%. Tried a power cap , still had issue so fitted a external bec to power servo and rx. Also i have switched off theremal cut off and Lipo low voltage protection. car is now fine. Have you recently upgraded to a more powerful servo?

I think it was dead band mostly but the other changes seed to help too

Sounds a bit like the issue I'm having with a reverse glitch
http://www.oople.com/forums/showthread.php?t=164722

As im a noob i don't know what a bec is can you explain a bit more for me
Please?