View Full Version : TRF211XM
Chris
15-04-2015, 07:37 AM
42288 TRF211XM
Coming soon
xfactor
15-04-2015, 07:58 AM
Whats this Chris,
Any pictures !!!!:woot::woot::woot:
Origineelreclamebord
15-04-2015, 09:19 AM
Awesome! Just one thing though... I wish they didn't use this name - for anyone trying to source a TRF211 (The prototype that came before the Dyna Storm) it will be impossible once a car is released with the same name...
Again, that said... I'm curious :) Who has developed this in absence of a EU-top driver?
xfactor
15-04-2015, 09:43 AM
I think it will be along the lines of the Yokomo and Xray. Low rider gearbox.
Only my opinion if its been designed for the Worlds.:thumbsup::thumbsup:
D-StyleNZL
15-04-2015, 11:24 AM
Without any top pro supporting development (even the us drivers havnt been that active with anything) be interesting to see whats changed
But they need to bring it into the times (full front & rear hex hubs, front end to have abit of a make over,) and hopefully they have a XR rear mount version for everybody else not running sugar glazed tracks
xfactor
15-04-2015, 02:22 PM
Without any top pro supporting development (even the us drivers havnt been that active with anything) be interesting to see whats changed
But they need to bring it into the times (full front & rear hex hubs, front end to have abit of a make over,) and hopefully they have a XR rear mount version for everybody else not running sugar glazed tracks
I would of thought Naoto would have had some input. I know hes on-road for the TRF Team, but his off road knowledge will be huge coming from the Team he came from.
SiR_Dave
15-04-2015, 04:13 PM
Glad to see Tamiya is still trying to get our money every two years or so:confused::eh?:
tyreman
15-04-2015, 04:59 PM
I would of thought Naoto would have had some input. I know hes on-road for the TRF Team, but his off road knowledge will be huge coming from the Team he came from.
I would very much doubt it as he's contracted to Kyosho for off road.
Glad to see Tamiya is still trying to get our money every two years or so:confused::eh?:
And often succeed at that ....:woot:
Guessing from the name 2 11 I would think it is going to be a car with the motor in the middle and a small belt to the rear like the Schumacher KF2.
D-StyleNZL
18-04-2015, 05:41 AM
Kentech posted a small translated discription.
What i found interesing:
"■ High strength, high elasticity and high impact resistance to the excellent new material "Quick Form (R)" adoption of the bathtub chassis!"
Return to the plastic bathtub chassis?
SiR_Dave
18-04-2015, 06:28 AM
Yes the new material is similar to what on road bicycles use for composite rims... very strong yet flexible at the same time :yawn:
ralphee
18-04-2015, 06:33 AM
So its being unveiled at the Shizuoka Hobby show, personally i cant wait. Wonder if it really will be a high grip astro car?
lee
guinness
19-04-2015, 08:59 AM
waiting impatiently
I saw some new info about the TRF211XM at Kentech's blog (http://kentech.blogs.se/2015/04/22/tamiya-trf211xm-full-info-in-english-20248503/) (http://kentech.blogs.se/2015/04/22/tamiya-trf211xm-full-info-in-english-20248503/):
42288 1/10 R/C TRF211XM Chassis Kit
Tamiya is delighted to announce the latest evolution in its 2WD R/C buggy series. The TRF211XM chassis is a high-spec unit designed to compete in top-end racing, with the grip and road holding to take on the very best that this seriously competitive scene has to offer. It features a whole host of newly-designed parts, including a resin lower deck specially produced to offer sublime balance. This seriously speedy buggy is unfazed by bumpy,undulating off-road surfaces.
Featured Components
- TRF211XM Lower Deck
- Rear Stiffener Carbon Battery Stiffener (2.0mm)
- Carbon Battery Plate (2.5mm)
- Aluminum Battery Stoppers
- Carbon Rear Damper Stay (4.0mm)
- Brass Suspension Mount Rear F
- Aluminum Gearbox (choice of ball and gear diff units)
- Big Bore Dampers (Front/Rear)
- Drive Shafts w/Axle Rings
- Cooling Pressure Plates
- Lightweight Body & Rear Wing
About the Model
• This is a 1/10 scale R/C 2WD buggy chassis assembly kit.
• New lightweight resin bathtub chassis offers excellent balance of rigidity and flexibility, to master off-road surfaces. It can be used with a wide variety of battery pack types.
• Rear stiffener and battery stiffener parts are attached to each other during assembly, improving rear rigidity.
• 4-wheel double wishbone suspension is paired with big bore aeration dampers for supreme performance.
• Also includes lightweight 0.6mm thickness body from Item 84374 and wing.
• Comes with durable brass Rear F suspension mount.
• Universal drive shafts are secured using axle rings.
• Slipper clutch pressure plates feature indentations to allow more efficient cooling.
• Features an aluminum gearbox with a choice of ball or gear differential units.
• For use with separate type battery pack, or a combination of straight type battery pack and low-profile servo.
:D
xfactor
22-04-2015, 07:12 PM
Hope the Gearbox is BLUE :D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D Not that it matters.
BLUE :thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup:
ralphee
22-04-2015, 07:21 PM
Make it all blue lol, im having this haha, pretty excited for Shizuoka now!
Lee
xfactor
22-04-2015, 07:26 PM
Blue Low Rider Gearbox YEAH BABY :drool::drool::drool::drool::drool: I know Lee, not long now matey......
ralphee
22-04-2015, 07:41 PM
You going to preorder Mark? Hope it is a low rider high grip car, shock us to our core Tamiya and fit it with hexes too lol!
xfactor
22-04-2015, 08:18 PM
Yes Lee, good chance matey I will order/get one. Cant wait to see what Tamiya have done. If its been designed for the Worlds which has been stated then I would of thought it will be along the lines of Yokomo and Xray maybe ?.
My guess is,
Narrow tub chassis like the VEGA.
Multi-layout battery options (hope saddles side by side option across chassis)
Low Rider Gearbox.
Only my guess and opinion but hope its the above. Oh and with a BLUE GEARBOX.....:D
ralphee
22-04-2015, 09:21 PM
Oh pack it in Mark im drooling haha!
Lee
ralphee
22-04-2015, 09:23 PM
Oh snap, it uses the original bodyshell, that means my two beautiful Kifo bodies will be of use afterall!
Lee
Sounds like it is going to be a XMW with a plastic chassis and some options.
Since the same body comes with it, it can't be a completely different car if that has to fit, well not that it fits the xmw properly but that's another story.
ralphee
23-04-2015, 03:05 PM
Sounds like it is going to be a XMW with a plastic chassis and some options.
Since the same body comes with it, it can't be a completely different car if that has to fit, well not that it fits the xmw properly but that's another story.
No it doesnt sound like a plastic 211 at all. As for bodies, i can fit a Phantom on a YZ2, so thats a silly analogy.
lee
DarkHawk
23-04-2015, 03:42 PM
I don't think it will be a major update as it sounds like it uses the trf201 front end.
also you can use touring car straight packs with a low profile servo. I think the car could look like the durango 2wd?
ralphee
23-04-2015, 04:49 PM
My guess is a current front end, and a revised rear with a low grip tranny, as for the chassis profile, why change that if its not neccessary, yup if say a more dedicated LG car?
And we know Tamiya dont go nuts over bodyshell updates, just look at the 4wd stable!
Lee
xfactor
23-04-2015, 07:16 PM
100% With Lee on the body front. The majority of buggy bodies interchange. RB6,201,Centro,22 and Jconcepts will fit each other.
As for Tamiya again 100% with Lee, Tamiya dont do bodies again the majority of TRF Buggies DO NOT come with bodies.
TRF 201
TRF 511
TRF 502
TRF 503
Did not come with bodies.
TRF 501 was a love or hate body
TRF 501 Worlds again love or hate it.
Fredrik Emilsson
24-04-2015, 02:10 PM
TRF501X body is fantastic! :)
Also bring back shells like Dyna Storm, Top Force, Avante and Egress! Love ém!
ralphee
24-04-2015, 04:24 PM
The 501x is one of my all faves, its alien and insane. The Dynastorm, still possibly the most delicate and gorgeous buggy ever created, and i mean delicate in style, its just, beautiful!
lee
msxmre
24-04-2015, 04:47 PM
I got body shell and under tray with my TRF502X, only TRF buggy I got it with.
Scotty....
SiR_Dave
24-04-2015, 05:49 PM
TRF501X body is fantastic! :)
Love ém!
Same here fantastic looking shell:thumbsup:
Aussie Top Force
26-04-2015, 10:20 AM
Dilema,
Snap up an XMW as the price has dropped a little or wait for the 211? My XM is working well on carpet.
Good to hear it will have an aluminium rear gear box. Helps keep the motor cool and provides a rigid rear section. TRF Blue XM rear gear box definitely has the bling factor so hoping they do the same on 211.
So will Tamiya have the only "Plastic" mid motor chassis'd 2wd car?
ralphee
27-04-2015, 02:34 PM
Well at least i do still have these two beauties to plonk right on come the time!
lee
http://img.photobucket.com/albums/v642/ralphee/20150426_125751_zpscekecwbo.jpg (http://smg.photobucket.com/user/ralphee/media/20150426_125751_zpscekecwbo.jpg.html)
Chris
11-05-2015, 07:49 AM
http://www.redrc.net/wp-content/uploads/2015/05/TamiyaTRF211XM.jpg
DarkHawk
11-05-2015, 07:53 AM
All the guessing is over
No it doesnt sound like a plastic 211 at all. As for bodies, i can fit a Phantom on a YZ2, so thats a silly analogy.
lee
Guess it wasn't that silly afterall...
Looks pretty close to the XMW that is sitting on my desk right now, but with a new "plastic \ composite \ quickform" material chassis and some option parts.
Only real difference in design I see other then the chassis is some connection between the battery brace and the gearbox brace.
xfactor
11-05-2015, 09:50 AM
Looks like to me there is a new motor plate with the motor further away from the driveshafts. Will be good to see a bigger picture...... Ha just seen the one above
xfactor
11-05-2015, 09:52 AM
Just wondering will this allow for saddles side by side ?
guinness
11-05-2015, 01:53 PM
the most annoying thing is to known that there isn't a proper TRFbuggy team to show the potential of this car in the racing scene....why Tamy whyyyyyyy?
ralphee
11-05-2015, 03:07 PM
Was hoping for something more TBH. Motor does look more forward, the rear brace seems to show that, but its like a tweaked plastic Vega.....hmm, need to see more, and still no blooming hex hubs, come on Tamiya, get with the program lol.
lee
SiR_Dave
11-05-2015, 08:17 PM
Wow... just saved a whole bunch of money after seeing this...... just gave to give up only a arm now for the chassis and little bits to try it out vice losing a arm, leg and other male body part to purchase the whole kit.....:thumbdown:
Chassis, battery mounts and rear suspension mounts and you have a 211xm for a fraction of the cost... everything else is XMW or pre-xmw parts....:eh?::thumbdown:
akime
12-05-2015, 06:27 AM
XMW is very good out of box and this is next evolution...
211XM is finished older XM and XMW...
And sharing parts with older cars ? Why no ?
guinness
12-05-2015, 06:58 AM
Wow... just saved a whole bunch of money after seeing this...... just gave to give up only a arm now for the chassis and little bits to try it out vice losing a arm, leg and other male body part to purchase the whole kit.....:thumbdown:
Chassis, battery mounts and rear suspension mounts and you have a 211xm for a fraction of the cost... everything else is XMW or pre-xmw parts....:eh?::thumbdown:
I doubt will be like this ,I'm sure they made sure parts will not match with new chassis lol
Just wondering will this allow for saddles side by side ?
Bottom of the chassis looks pretty flat, and with no bolts in the way for the seperate sidepods it should probably fit.
SiR_Dave
12-05-2015, 11:32 PM
I doubt will be like this ,I'm sure they made sure parts will not match with new chassis lol
We will see.... but knowing Tamiya's Off Road track record as of late it might be 90% of the XMW/201 stuff will work on the chassis:(
akime
14-05-2015, 01:05 PM
new pics:
http://tamiyablog.com/2015/05/photos-of-all-new-tamiya-rc-car-releases-at-54th-shizuoka-hobby-show-2015/
Origineelreclamebord
14-05-2015, 01:14 PM
So saddles side by side or a transverse shorty will only work if you get the Dremel out... That it's TRF201-based is nothing to complain about imo, but this is something they could've easily incorporated in the car, and broadened the options for this car on low-medium bite...
Still I'm curious about the material they're using for that tub :)
xfactor
14-05-2015, 01:24 PM
mmmm whats so special about the chassis. The only difference I see between 201 xm and the 211 xm is chassis material.
What advantage does this chassis have over the alloy.:eh?:
patez
14-05-2015, 02:31 PM
I sure hope the gearbox from xmw fits. It would be nice to try out this plastic chassis. XMW is a bit heavy when built with the factory parts. But this could be just right for a low-medium grip. Not going back to rear motor for any condition.
I haven't tried original XM, but people say it was unstable for low grip..
SiR_Dave
14-05-2015, 04:58 PM
new pics:
http://tamiyablog.com/2015/05/photos-of-all-new-tamiya-rc-car-releases-at-54th-shizuoka-hobby-show-2015/
Well looks like it's a chassis 3 parts that are needed to update a 201xmw....:eh?:...
chassis kit will all that I will but...:bored:
xfactor
14-05-2015, 06:28 PM
Any price on the 211xm yet.
patez
15-05-2015, 05:42 AM
http://www.racingfactory.fi/tuotteet/SAHKOAUTOT-Tamiya/42288-TRF211XM-Chassis-Kit-110533
preorder 449 e.. I think xmw was the same.
kentech
15-05-2015, 07:54 AM
http://kentech.blogs.se/2015/05/15/another-few-trf211xm-pictures-from-shizuoka-20382951/
http://www.tamiya.com/japan/hobbyshow/news1505/report/news1.htm#42288
http://data9.blog.de/media/149/8559149_f406d26a9f_o.jpeg
Aussie Top Force
15-05-2015, 10:01 AM
The new chassis looks interesting. Wonder how much lighter it will be? Wonder if it will make the kit cheaper to produce, i.e. more affordable?
I think it lacks shorty battery pack options. All it needs though is some additional mounting holes for some brackets.
Black or white, it just aint as 'bling' as the XMW chassis. Further, I'm with a few others thing they should have made front hex axles. Rear Hexes are easy. I've just got a bunch of 503 versions from Stella. They just don't come with the screws!
xfactor
15-05-2015, 11:04 AM
I like the white. It reminds me of back in the day. RPM made a hybrid RC10 with very similar chassis.
Wonder if if could be dyed ???
guinness
15-05-2015, 11:10 AM
The new chassis looks interesting. Wonder how much lighter it will be? Wonder if it will make the kit cheaper to produce, i.e. more affordable?
I think it lacks shorty battery pack options. All it needs though is some additional mounting holes for some brackets.
Black or white, it just aint as 'bling' as the XMW chassis. Further, I'm with a few others thing they should have made front hex axles. Rear Hexes are easy. I've just got a bunch of 503 versions from Stella. They just don't come with the screws!
Which hex you got from Stella? Link? Thanx
Aussie Top Force
17-05-2015, 07:39 AM
http://www.stellamodels.com.hk/19804801-clamp-type-wheel-2pcs-42275-trf503-p-8930.html
These are the ones. You need to order the 1.6 x 4mm screws separately though.
SiR_Dave
27-05-2015, 01:18 AM
Instructions are out now ...:eh?:
http://www.tamiyausa.com/pdf/manuals/42288ml.pdf
SiR_Dave
27-05-2015, 01:59 AM
Also the chassis will be white and here are the part #'s to update a XMW to a 211xm and a general price range too ;)
New Chassis Part#10334079 (100$)
New Waterfall Part#13450694 (18$)
New Rear Battery Brace Part#13404054(8$)
New Battery Strap Part#13404055(12$)
New Rear Brass XA mount Part#13450695(15$)
So for about 150$ you can upgrade a TRF201XMW to a TRF211XM... sounds a lot cheaper to do it that way vice buying a whole new kit :confused:
guinness
27-05-2015, 10:50 AM
Also the chassis will be white and here are the part #'s to update a XMW to a 211xm and a general price range too ;)
New Chassis Part#10334079 (100$)
New Waterfall Part#13450694 (18$)
New Rear Battery Brace Part#13404054(8$)
New Battery Strap Part#13404055(12$)
New Rear Brass XA mount Part#13450695(15$)
So for about 150$ you can upgrade a TRF201XMW to a TRF211XM... sounds a lot cheaper to do it that way vice buying a whole new kit :confused:
Don't know.......I guess we will see if is worth it to upgrade once the kit is out and somebody gives a go .......
xfactor
27-05-2015, 10:59 AM
Apparently 20th June release date. I am curious to how this chassis handles compared to the alloy.
qatmix
28-05-2015, 01:41 PM
Manual is here
http://www.tamiyausa.com/pdf/manuals/42288ml.pdf
Kit is starting to show up on ebay, costing more then a XMW...
Here (http://www.ebay.com/itm/Tamiya-42288-1-10-RC-TRF211XM-Chassis-Kit-/221798326440?pt=LH_DefaultDomain_0&hash=item33a435e0a8)
ralphee
12-06-2015, 09:55 AM
Im passing, thats insane for outdated old tech, Tamiya, your taking the rise now lol!
Lee
ralphee
12-06-2015, 09:59 AM
Really had high hopes for this, but the more I have looked, the more i think its just silly release, no hexes, no other real mods other than a plastic chassis, its like a back dated B5M, and for crazy money, maybe its Ebay price hike time though, it could fall cheaper?
lee
, maybe its Ebay price hike time though, it could fall cheaper?
lee
Don't think so, the XMW has also been pretty stable since it was released.
Going up a bit over $400 as it ran out of stock in several shops, and dropping a bit to the $379 it is on now
ralphee
12-06-2015, 04:21 PM
Did look on Stella earlier Roel but couldnt find it on there? Still seems a lot for an XMW derivative with a plastic tub, maybe itll go like the clappers lol.
lee
xfactor
13-06-2015, 10:57 AM
They did exactly the same at 2013 worlds. Just before the worlds Tamiya bring out the XM. Then at the worlds there is XMW.
Yes Im for development but seems with the 211 xm they are just selling off 201 parts with the NEW CHASSIS being the selling point.
I feel like the XM there maybe a NEW buggy seen at the worlds. I wont be buying this buggy will wait to see what happens at the worlds. If they attend with what driver !!!!!!
Just my opinion.
ralphee
13-06-2015, 11:21 AM
Mark i think your just full of......LOL.......as it goes buddy, you have a great theory, could well be the case of shifting a load of obsolete parts, on a cheaper to produce chassis?
Machining the alloy plate, and machined side pods must be way more costly than running out that white composite tub, so yeah, ill buy that buddy haha.
I have no clue who will run the car at the worlds, was a bit let down they didnt really show at the warm up race.
All id ask is a low slung tranny, wheel hexes and ball cups that stay on in a minor knock....and im all over it lol.
I still need a TRF 2wd to adorn my Kifo bodies so i live in hope mate, but if this does fall in price in a big way, id still be tempted, just not at that price.
lee
Origineelreclamebord
13-06-2015, 05:58 PM
The release is a missed opportunity in some ways, but don't forget: They invested in a new mould for a car that will not be a best seller... Tamiya is always expensive, but it does sort of explain the price for what's basically a revamped old car, and perhaps in the future that means Tamiya is crazy enough to invest in 15-odd new moulds for a new platform :lol:
ralphee
13-06-2015, 09:46 PM
I was hoping somebody would work on a low CG tranny for this platform TBH lol!
Lee
xfactor
13-06-2015, 09:50 PM
Tamiya are for the worlds. Its the 212 xmw :lol::lol::lol::lol:
ralphee
14-06-2015, 09:17 AM
Haha, could well be Mark, hmm, why do i want another XMW all of a sudden, got a TRF kick i cant shake lol.
lee
ralphee
20-06-2015, 10:06 AM
Anybody bought one as yet? Pondering ordering one next week, along with some B5 front hubs to run all my wheels!
Lee
knighthawk
20-06-2015, 11:45 AM
Mark Rhienhard is at RHR and the Warm up meet
After round one 2WD he's 13th
What car is he running ?
xfactor
20-06-2015, 11:47 AM
Hes Yokomo now for off road.
SiR_Dave
21-06-2015, 06:05 PM
Anybody bought one as yet? Pondering ordering one next week, along with some B5 front hubs to run all my wheels!
Lee
Ordered the 5 parts to convert my XMW over the the 211xm.... Should have the parts from Japan in about 10Days or so..
ralphee
21-06-2015, 06:51 PM
Sounds a nice option seeing as you have already have the XMW, where did you order the parts from?
lee
The car is quite a bit cheaper at stella then it was on ebey.
http://www.stellamodels.com.hk/42288-trf211xm-chassis-p-9015.html
Dave, how much did the parts cost to convert the xmw to a 211 ?
SiR_Dave
21-06-2015, 08:45 PM
Sounds a nice option seeing as you have already have the XMW, where did you order the parts from?
lee
I ordered the parts directly from Tamiya Japan. And I have then shipped to my I laws house in Yaokohama then they send it to me in the states :)
The car is quite a bit cheaper at stella then it was on ebey.
http://www.stellamodels.com.hk/42288-trf211xm-chassis-p-9015.html
Dave, how much did the parts cost to convert the xmw to a 211 ?
All the parts cost 155$ USD after the yen to dollar conversion.. The rate is very good currently so took advantage of it... But shipping to me is about 30$ via EMS...
kentech
02-07-2015, 05:49 AM
Have a brand new TRF211XM kit for sale:
http://www.oople.com/forums/showthread.php?t=169232
SiR_Dave
05-07-2015, 03:17 AM
All of my TRF 211 conversion parts came in today.. Going to build it up and see if it works better than the XMW chassis.. I can already tell that it's going to be very light ... So that might help :woot:
ralphee
05-07-2015, 08:02 AM
Awesome, cant wait to see, your Tamiya builds are always on the next level!
Lee
D-StyleNZL
05-07-2015, 11:14 PM
84419 TRF211XM conversion set - release August
Hope you all didnt run out at buy one just yet
patez
06-07-2015, 11:00 AM
All of my TRF 211 conversion parts came in today.. Going to build it up and see if it works better than the XMW chassis.. I can already tell that it's going to be very light ... So that might help :woot:
Is it possible to use shorty pack sideways with the new chassis? I'm thinking modding xmw to do that.
xfactor
06-07-2015, 11:09 AM
I dont think so. This is the problem with this chassis. The Tamiya Vega Gen2 is what this buggy is originally based off. The beauty of the Vega is it has 5 lipo positions. The main one was saddle side by side across the chassis. This is the XMW and possibly 211 xm down fall. The XMW needed the lipos across the chassis.
Aussie Top Force
06-07-2015, 11:31 AM
84419 TRF211XM conversion set - release August
Hope you all didnt run out at buy one just yet
Wonder what will be in that conversion set? Everything to convert a standard 201, or just update the XMW?
Quite frankly my XM would have been better than the XMW and 211 on carpet if only it had a gear diff:cry: due to more forward weight bias. I drove a Schumacher KF2 on carpet the other day, it was impressive! the motor is quite forward.
Shall wait for conversion kit release and decide if I really need another new 2wd kit from the big T.
ralphee
06-07-2015, 03:14 PM
TBH, i found the XMW horrible on carpet with a gear diff. Very unpredictable, with a ball diff the car was very stable, just wished id have stuck with mine for a while longer and experimented more before going to the YZ2.
The 211 conversion has the chassis, rear braces and lipo holders, shock tower and waterfall brace IIRC.
Would be awesome to see somebody do a homebrew low CG tranny for one TBH.
lee
SiR_Dave
06-07-2015, 03:27 PM
Is it possible to use shorty pack sideways with the new chassis? I'm thinking modding xmw to do that.
Yes.... but it raises the battery way too much and you would have to trim some of the side supports.. which would weaken the new chassis significantly.. :cry:
MHeadling
08-07-2015, 07:18 AM
Review/unboxing video is up on Shortcourse world
http://youtu.be/CEm570s-aHs
moggers
08-07-2015, 01:33 PM
I've been a fan of Tamiya for many years, giving me great results in TC's over the years.
I ran Tamiya 4WD before but never in 2WD. Now I've pulled the trigger and can't wait to run the 211XM in anger :woot:
I'll try and share a build blog under a new thread over the next few days, but for now a few photo's of the much hyped chassis :thumbsup:
SiR_Dave
08-07-2015, 03:26 PM
Well got the new chassis mounted up with a few other goodies and was able to get about 4 packs on the new chassis.... very interesting how this chassis changed the way the car handles over the 201xmw..
Pro's
*light weight. lost almost 20g over the XMW set up and that's with the brass rear mount
*it jumps better than the XMW... even with the same set up on the car as I had with the XMW
*love the new waterfall/battery brace!! tightened up the area where the XMW had a lot of flex..
*seems to get a lot more traction than the previous alloy chassis... almost makes you want to push the car even more..
*Set ups will be close to what they were with the XMW... but I have found that the car like to have a little softer spring in the rear.. ended up going to a red spring in the rear ... but I think I'll be going up a half weight in oil to increase pack..
*if you going to just by the chassis then it's a great upgrade for XMW users that will not hurt your pocket book too much ;)
Con's
*can't get over the white chassis... it's just ugly!! and collects dirt like no other! ( Just think wearing White pants to a BBQ place and trying to keep them clean :lol:) this car screams for a chassis protector!!:thumbdown:
*people still ask you if your running a Frog, Hornet, Fox ...ect ect :confused:
MHeadling
08-07-2015, 06:45 PM
Good write up Sir Dave, pics please!
SiR_Dave
09-07-2015, 01:54 AM
Will do once I get back from vacation :thumbsup:.... also have to get more packs on this new chassis once I get back too:woot:
ralphee
10-07-2015, 06:22 AM
Sounds like a good car, i think ill bite haha! Hmm im thinking some nice blue carbon vinyl on that chassis, keep it all very TRF lol!
Lee
ralphee
10-07-2015, 06:24 AM
Whats this chassis like to dril and countersink? Thinking those blue battery stops should have a shorty placement?
Lee
The Doktor
08-08-2015, 02:46 PM
Think im good to go....
http://i339.photobucket.com/albums/n475/leemcguire74/stuff/2113_1_zpspbe0kifz.jpg
http://i339.photobucket.com/albums/n475/leemcguire74/stuff/2112_1_zpswibrgqga.jpg
http://i339.photobucket.com/albums/n475/leemcguire74/stuff/2111_1_zpskxuamvuk.jpg
akime
08-08-2015, 05:43 PM
Think im good to go....
i think, you have rear arms in wrong direction...
The Doktor
08-08-2015, 05:54 PM
i think, you have rear arms in wrong direction...
No, I dont. :thumbsup:
You can run the arms in either direction. This is the set up i used on the 201xmw, and reckon its a good starting point for the new car.
Worked well on astro, though on dirt they are best in the direction shown in the manual.
I know this is a different chassis, but the idea being start with a set up you know worked on a similar car.
guinness
08-08-2015, 11:03 PM
Do the arms have the shocks holes on both sides???
CamaroTom
13-08-2015, 07:17 PM
I just got my 2S lipo for my trf211xm build. Check out how well it fits. Its like the SMC 5800 was made for it.
Do the arms have the shocks holes on both sides???
The thinner high response rear arms do...
guinness
14-08-2015, 10:07 AM
Which one are those ??
SiR_Dave
16-08-2015, 07:04 PM
They should be the same as the OEM 502x rear arms;)
guinness
17-08-2015, 11:29 AM
What do u gain in swapping the arms around?
SiR_Dave
17-08-2015, 02:31 PM
A much longer wheel base and more weight forward
CamaroTom
19-08-2015, 10:58 AM
Hey guys I'm finally got all my parts together for my TRF211XM build.
Let me know what you think.
Sanwa Super Vortex Zero esc (using with my MT4S)
Scorpion RS-3420 5.5t (6000kv) 600/720 peak watts
Sanwa RX-482 rx with internal antenna
Sanwa SRG-BLS Version 2 servo
SMC 5800 2S square pack
For the motor it was down to the Tekin 7.5t (6150kv) or the Scorpion. I went with the 5.5t in the Scorpion because the 7.5t version was only 4300kv.
xfactor
19-08-2015, 01:10 PM
I would not run a 5.5 in the 211. I would not go below 7.5 to be honest. I think the 5.5 is way to hot for the 2wd or any 2wd. I would only run 6.5 in a 4wd.
I would think about the motor matey.:)
CamaroTom
19-08-2015, 07:27 PM
Ok thanks for the advice.
So just trying to get this straight a tekin 7.5t 6150kv motor would be ok, but not a scorpion 5.5t 6000kv?
Im not so much into to club racing as of yet, just want to build a fast, balanced, and powerful 2wd buggy at the moment
ralphee
19-08-2015, 07:30 PM
Just keep in mind buddy, this buggy is LIGHT, mine is very quick on a 10.5 indoor!
Lee
SiR_Dave
19-08-2015, 11:05 PM
Yeah... a 7.5 would be plenty of motor for this Buggy.. Like Lee said... you might save some transmission gears too taking with a lower KV motor:)
CamaroTom
21-08-2015, 12:39 AM
Too late to switch to 7.5. Fed Ex dropped this off today. It's a beautiful motor. I'll tame the motor down as needed via the SSL function on esc/tx. I want to do a few speed runs first off. Motor is making 720 peaks watts not too shabby. Are metal transmission gears available?
ralphee
21-08-2015, 02:15 AM
You can get the metal idler gear and diff planetary gears i think?
Lee
SiR_Dave
21-08-2015, 02:40 AM
There use to be metal idler gears about 2-3 years ago but I have yet to see anybody restock them in a while they where made for the Tamiya FF03 and 3Racing made them. But if you look around at other makers cars you will also see that Serpent uses a 27T idler gear as well and they make a alloy metal gear as well...;)
SiR_Dave
21-08-2015, 02:45 AM
27T Metal idler gears
http://www.ebay.com/itm/3Racing-CAC-310-Aluminum-Idler-Gear-For-Mid-Motor-27T-for-Cactus-/171866333009?pt=LH_DefaultDomain_0&hash=item2804081f51
http://www.amain.com/rc-cars/serpent-aluminum-idler-gear-27t-ser500260/p275587?gclid=CM244cOTuccCFQyoaQodzoQGzA
SiR_Dave
22-09-2015, 12:22 AM
Crickets in here:confused::cry:
ca-rj
28-08-2016, 01:27 PM
Dave, are you still running the 211XM at SDRC?
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.