PDA

View Full Version : Cougar 2 project


Retro RC
23-04-2015, 09:51 AM
Ok guys here is the start of project number1 for me my original cougar.

I bought this car back in 1990 when they first came out and has raced in many forms in its life including a shotgun conversion for a while. It had the long front shock tower conversion before that, and ended as it is now with MMS gear box works rear arms and hubs, ball raced steering, version 1 slipper, proto type cougar 2 shock towers and front arms.

I also have a cougar 2 team car on its way from the UK atm.

I'm going to be building 2 buggies a shelfer and a runner. The shelter will be basically a new build to full works spec..... Only need roller or ball raced drive shafts to have it complete, and the runner will be a modded team car.

I'll also be building a nib bosscat works but that's another thread to come:thumbsup:

Look forward to you feedback and any hints suggestion etc

Adrian

Danf1275
23-04-2015, 06:50 PM
Love the Cougar, got a few myself.

Is Fiberlyte battery retainer current production - need one for my Works.

Looking forward to following this.

Peakey
23-04-2015, 06:54 PM
Love to see all the NIP parts laid out someone's been spending lol, can't wait to see it finished.

Retro RC
23-04-2015, 07:17 PM
Love to see all the NIP parts laid out someone's been spending lol, can't wait to see it finished.

Lol there's still more to come and then something a little special through fathead all going well😜

Retro RC
23-04-2015, 07:20 PM
Love the Cougar, got a few myself.

Is Fiberlyte battery retainer current production - need one for my Works.

Looking forward to following this.

Yes fibre lite can cut them for you just tell them you want a Jeroen cougar 2 battery strap or if your in the Southern Hemisphere pm fathead on here and he will help you out👍

xfactor
23-04-2015, 08:06 PM
Cant beat purple nuts........:D

Cant see any though.......:(


:thumbsup::thumbsup::thumbsup:

type49rs
23-04-2015, 08:24 PM
Cant beat purple nuts........:D

Cant see any though.......:(


:thumbsup::thumbsup::thumbsup:

I'm sure if you beat your nuts hard enough they would turn purple:woot:

type49rs
23-04-2015, 08:31 PM
Ok guys here is the start of project number1 for me my original cougar.

I bought this car back in 1990 when they first came out and has raced in many forms in its life including a shotgun conversion for a while. It had the long front shock tower conversion before that, and ended as it is now with MMS gear box works rear arms and hubs, ball raced steering, version 1 slipper, proto type cougar 2 shock towers and front arms.

I also have a cougar 2 team car on its way from the UK atm.

I'm going to be building 2 buggies a shelfer and a runner. The shelter will be basically a new build to full works spec..... Only need roller or ball raced drive shafts to have it complete, and the runner will be a modded team car.

I'll also be building a nib bosscat works but that's another thread to come:thumbsup:

Look forward to you feedback and any hints suggestion etc

Adrian

Awesome project Adrian. I do have one small suggestion......send it to me:thumbsup:
Where on earth did you find a NIB Bosscat works? I'm pretty sure Wayne had one but I don't know whatever happened to it.....or any of his other stuff for that matter.

fathead
23-04-2015, 08:35 PM
Funny you should mention Waynes stuff, I have a decent lead on the stash.....


Woooooo can't wait to get my mitts on this Cougar to measure up! (and the Bosscat too)

Retro RC
24-04-2015, 12:29 AM
Funny you should mention Waynes stuff, I have a decent lead on the stash.....


Woooooo can't wait to get my mitts on this Cougar to measure up! (and the Bosscat too)

SSSSSSSSHHHHHHHH don't tell anyone yet damo

Retro RC
24-04-2015, 12:33 AM
[QUOTE=Retro RC;909507]Ok guys here is the start of project number1 for me my original cougar.

I bought this car back in 1990 when they first came out and has raced in many forms in its life including a shotgun conversion for a while. It had the long front shock tower conversion before that, and ended as it is now with MMS gear box works rear arms and hubs, ball raced steering, version 1 slipper, proto type cougar 2 shock towers and front arms.

I also have a cougar 2 team car on its way from the UK atm.

I'm going to be building 2 buggies a shelfer and a runner. The shelter will be basically a new build to full works spec..... Only need roller or ball raced drive shafts to have it complete, and the runner will be a modded team car.

I'll also be building a nib bosscat works but that's another thread to come:thumbsup:

Look forward to you feedback and any hints suggestion etc

Adrian[/QUOTE

Awesome project Adrian. I do have one small suggestion......send it to me:thumbsup:
Where on earth did you find a NIB Bosscat works? I'm pretty sure Wayne had one but I don't know whatever happened to it.....or any of his other stuff for that matter.
I got lucky john, found it on Aussie eBay was missing the chassis battery straps and sticker set, I've got a fibrelyte chassis and battery straps just can't find the sticker set.......yet, I will be building it up as it's not a complete original set and the fact I got it so cheap helps too:D

Retro RC
24-04-2015, 02:10 AM
Cant beat purple nuts........:D

Cant see any though.......:(


:thumbsup::thumbsup::thumbsup:

Better take a closer look it's not just my nuts that are purple :thumbsup::thumbsup::thumbsup:

kenios
24-04-2015, 05:55 PM
try this website, i don't know if they still have them, i will look further for others.

http://oneofftees.com/zencartPGFX/index.php?main_page=product_info&products_id=10&zenid=8dd2c2fa3890f30dcdd22ba9178f142a

regards,

kenios

kenios
24-04-2015, 06:06 PM
well, i bought these for my cougar II restauration and they are of good quality, i think the ones from panda gfx are also quite good but i don't know for sure. these are from tamkyo repro decals , very good seller !!

http://www.ebay.com/itm/Schumacher-Cougar-2-Repro-Decal-Sticker-Pink-Blue-NEW-/111643363772?pt=LH_DefaultDomain_3&hash=item19fe7689bc#ht_344wt_865

kenios

can't post pictures here??

Retro RC
24-04-2015, 06:18 PM
Thanks kenios

Danf1275
25-04-2015, 06:18 PM
well, i bought these for my cougar II restauration and they are of good quality, i think the ones from panda gfx are also quite good but i don't know for sure. these are from tamkyo repro decals , very good seller !!

http://www.ebay.com/itm/Schumacher-Cougar-2-Repro-Decal-Sticker-Pink-Blue-NEW-/111643363772?pt=LH_DefaultDomain_3&hash=item19fe7689bc#ht_344wt_865

kenios

can't post pictures here??

Fun game - spot the spelling mistake on decal sheet

Retro RC
25-04-2015, 06:26 PM
Lol mad mean and maddy

Danf1275
25-04-2015, 08:38 PM
Lol mad mean and maddy

Hadn't spotted that one - one I saw was more glaring

purplenut
25-04-2015, 09:39 PM
Cant beat purple nuts........:D

Cant see any though.......:(


:thumbsup::thumbsup::thumbsup:
I will second that!!!

xfactor
25-04-2015, 10:06 PM
I have original Cougar 2 decals left over from Cougar 2 Team and Cougar 2 Works re-store on here. I also have original TEKIN decals in Purple, White and Red. I also have a original Red OAKLEY wing decal. If any good give me a pm with a offer.:thumbsup:

Mark.

Retro RC
27-04-2015, 06:37 PM
Thanks for the offer mark, I'm not to worried about sticker sets for the cougar the shelfer will probably just have a clear body anyway,

I'll be starting the rebuild this weekend all going well, the rest of my bits and pieces should be here this week:thumbsup:

Maskellator
27-04-2015, 07:08 PM
Haha hey Retro, I was talking to Fathead the other day and wondered where the Cougar he was talking about was coming from! Long time no see buddy. You still racing?

Peakey
27-04-2015, 07:27 PM
Am I on the wrong oOPle or has this been changed to oOPle.nz without me knowing :confused:

fathead
27-04-2015, 08:18 PM
:woot::D



I may have a cougar project soon too.........

Retro RC
27-04-2015, 08:49 PM
Am I on the wrong oOPle or has this been changed to oOPle.nz without me knowing :confused:

Lol we're like polish workers in the UK once we're here your stuffed. I have to laugh Justin I haven't talked to a lot of these guys in years.... Get onto an international forum and they all come out of the wood work:lol:

fathead
28-04-2015, 10:38 AM
I blame it on the vintage nats :cool:

Retro RC
29-04-2015, 10:17 AM
Pretty stoked I now have or have on their way all the parts I need for this project, it will be both a cougar 2 works shelfer and runner, so I get the best of both worlds something pretty to look at :drool:and something pretty to abuse:thumbsup:

Once I sort out getting pics from my iPhone onto here:blush: I'll post a few more up:D

Peakey
29-04-2015, 11:44 AM
Pretty stoked I now have or have on their way all the parts I need for this project, it will be both a cougar 2 works shelfer and runner, so I get the best of both worlds something pretty to look at :drool:and something pretty to abuse:thumbsup:

Once I sort out getting pics from my iPhone onto here:blush: I'll post a few more up:D

Photobucket app :thumbsup:

Retro RC
05-05-2015, 08:07 AM
Fun game - spot the spelling mistake on decal sheet

I sent these guys a pm to tell them about their spelling mistakes and they said they were deliberate......yeh right why the f would you do that lol

Peakey
05-05-2015, 09:01 AM
There will be a C2 Works shaped box making it way over to you very very soon buddy :thumbsup:

Retro RC
05-05-2015, 09:34 AM
There will be a C2 Works shaped box making it way over to you very very soon buddy :thumbsup:

Sssshhhhh :thumbsup:

Retro RC
16-05-2015, 06:09 AM
Ok so the last of my bits and pieces turned up today so now it's just a matter of stripping everything down getting the works chassis off to be templated for something special and then the build and rebuild can begin 👍

fathead
16-05-2015, 09:26 AM
;):thumbsup:

Retro RC
25-06-2015, 10:32 PM
Looks like I'm finally gunna start my build should have my special item out of fat head soon then it's all go.👍

fathead
13-04-2016, 01:36 AM
http://img.photobucket.com/albums/v690/fatheadnz/CNC/12991124_569561033211617_1952212995021502842_n_zps opa9bdww.jpg (http://smg.photobucket.com/user/fatheadnz/media/CNC/12991124_569561033211617_1952212995021502842_n_zps opa9bdww.jpg.html)

Retro RC
13-04-2016, 03:17 AM
http://img.photobucket.com/albums/v690/fatheadnz/CNC/12991124_569561033211617_1952212995021502842_n_zps opa9bdww.jpg (http://smg.photobucket.com/user/fatheadnz/media/CNC/12991124_569561033211617_1952212995021502842_n_zps opa9bdww.jpg.html)

Ooooooo what's that in the background .......... Looks like a mould for something I'm after 😎

fathead
04-08-2016, 09:23 PM
Some more progress, almost ready to pull a test chassis

http://img.photobucket.com/albums/v690/fatheadnz/CNC/13925523_618670761633977_2603838420772248751_o_zps ba4405il.jpg (http://smg.photobucket.com/user/fatheadnz/media/CNC/13925523_618670761633977_2603838420772248751_o_zps ba4405il.jpg.html)