moggers
13-07-2015, 08:49 PM
TRF211XM Build Hints & Tips
80974
OK, finally managed to build the new TRF211XM which I’ll be giving it’s first shakedown on an astro track later this week. Overall the build went very well, but I wanted to share some tips which are not all that new, but really helped me out and hopefully helps out others.
First off, what additional items did I add to the build:
The standard black Gear Diff O-Rings have been replaced by Kyosho O-Rings. This will help stop the gear diff from leaking oil over time.
80975
In the standard Gear Diff, the 211XM is supplied with plastic gears. Although this would make the diff incredibly light, I’m not sure on it’s strength for off-road, so have replaced the gears with steel gears. This does make the overall gearbox a little heavier, but for me well worth it.
80976
I decided to replace the standard blue shock O-Rings with aftermarket replacements. If you want leak free shocks, something I recommend.
80977
The standard Slipper Pads replaced with Team Associated pads.
80978
The Slipper Spring replaced with Team Associated spring. I will be testing this against the standard kit spring to compare slipper consistency.
80979
The standard layshaft Counter Gear is steel. Maybe a little overkill, but went for the lightweight replacement gear.
80980
The build:
First off, the build quality is what you’d expect from Tamiya………outstanding! :thumbsup:
The new chassis is incredibly light and very strong. Very impressed how Tamiya have managed to get the strength out of something so light, but it works!
A nice surprise was the alloy gearbox housing……wasn’t expecting that!
80981
80982
Tip 1:
When building the Ball Diff, the instructions show to flip the diff over BEFORE inserting the diff screw! I was told about this before but still got it wrong. It’s not very clear in the instructions and easy to get wrong.
Tip 2:
The shim for the Ball Diff and gearbox layshaft are very similar. Make sure you get this correct otherwise you’ll have a tight box! :confused: The thicker 0.5mm shim is for the ball diff and the thinner 0.2mm shim is for the layshaft.
Tip 3:
You will need to Dremel away a small part of the rear wishbones due to the Diff outdrives hitting the wishbones when compressing the rear suspension. This is also highlighted in the instructions.
Everything else went very smoothly as per instructions.
80983
80984
Lipo Layouts:
Just to show a couple of layouts I’ll be testing over the next couple of weeks, but primarily I’ll be running Saddles in the 211XM.
80985
80986
80987
This kit ain’t heavy:
The kit fully built but without wheels or electric is incredibly light…. only 671g. And that’s with steel gears in the diff and 30g weight upfront!! :o
80988
80989
It’s nearly ready for it’s maiden shakedown:
80990
I’ve recently raced the YZ-2 and KF2 and can’t wait to compare the 211XM against both. Although the kit does include a bodyshell, I’ve thrown that out and will be using the ProLine Phantom shell and LMR Avior wing.
The kit setup already looks very good and I don’t think I’ll be adjusting much apart from shock oils and springs. My base setup is below and I'll post updates to this later and how the car performs at it’s first race meeting later this week :)
I'll continue to modify the car. I've fitted temporary hex axle fitments on the rear to allow me to run 12mm hex wheels and I'll look at converting the front axles to hex fittings, but that's for later :)
This is my base setup for it's shakedown and will post further updates once it's been thrashed :woot:
80997
80974
OK, finally managed to build the new TRF211XM which I’ll be giving it’s first shakedown on an astro track later this week. Overall the build went very well, but I wanted to share some tips which are not all that new, but really helped me out and hopefully helps out others.
First off, what additional items did I add to the build:
The standard black Gear Diff O-Rings have been replaced by Kyosho O-Rings. This will help stop the gear diff from leaking oil over time.
80975
In the standard Gear Diff, the 211XM is supplied with plastic gears. Although this would make the diff incredibly light, I’m not sure on it’s strength for off-road, so have replaced the gears with steel gears. This does make the overall gearbox a little heavier, but for me well worth it.
80976
I decided to replace the standard blue shock O-Rings with aftermarket replacements. If you want leak free shocks, something I recommend.
80977
The standard Slipper Pads replaced with Team Associated pads.
80978
The Slipper Spring replaced with Team Associated spring. I will be testing this against the standard kit spring to compare slipper consistency.
80979
The standard layshaft Counter Gear is steel. Maybe a little overkill, but went for the lightweight replacement gear.
80980
The build:
First off, the build quality is what you’d expect from Tamiya………outstanding! :thumbsup:
The new chassis is incredibly light and very strong. Very impressed how Tamiya have managed to get the strength out of something so light, but it works!
A nice surprise was the alloy gearbox housing……wasn’t expecting that!
80981
80982
Tip 1:
When building the Ball Diff, the instructions show to flip the diff over BEFORE inserting the diff screw! I was told about this before but still got it wrong. It’s not very clear in the instructions and easy to get wrong.
Tip 2:
The shim for the Ball Diff and gearbox layshaft are very similar. Make sure you get this correct otherwise you’ll have a tight box! :confused: The thicker 0.5mm shim is for the ball diff and the thinner 0.2mm shim is for the layshaft.
Tip 3:
You will need to Dremel away a small part of the rear wishbones due to the Diff outdrives hitting the wishbones when compressing the rear suspension. This is also highlighted in the instructions.
Everything else went very smoothly as per instructions.
80983
80984
Lipo Layouts:
Just to show a couple of layouts I’ll be testing over the next couple of weeks, but primarily I’ll be running Saddles in the 211XM.
80985
80986
80987
This kit ain’t heavy:
The kit fully built but without wheels or electric is incredibly light…. only 671g. And that’s with steel gears in the diff and 30g weight upfront!! :o
80988
80989
It’s nearly ready for it’s maiden shakedown:
80990
I’ve recently raced the YZ-2 and KF2 and can’t wait to compare the 211XM against both. Although the kit does include a bodyshell, I’ve thrown that out and will be using the ProLine Phantom shell and LMR Avior wing.
The kit setup already looks very good and I don’t think I’ll be adjusting much apart from shock oils and springs. My base setup is below and I'll post updates to this later and how the car performs at it’s first race meeting later this week :)
I'll continue to modify the car. I've fitted temporary hex axle fitments on the rear to allow me to run 12mm hex wheels and I'll look at converting the front axles to hex fittings, but that's for later :)
This is my base setup for it's shakedown and will post further updates once it's been thrashed :woot:
80997