View Full Version : RC10
xfactor
22-07-2015, 10:02 AM
Hi all,
Peakey
22-07-2015, 11:02 AM
Wow 2 years, Looking forward to this :)
Just so you know RPM still have the motor covers but you can't order them on line apparently you have to email them and pay by money order or something like that. Some sort of tax fiddle I think but a few people have had them recently I think there like $10 each.
xfactor
22-07-2015, 11:11 AM
Hi J,
The white RPM gear cover has been re-released for the Worlds and Classic.
Peakey
22-07-2015, 11:11 AM
Here's the email I had back for part number ASC6311
We are offering those motor plates for $10USD each, plus $7 shipping for 4 guards shipped to the UK ($47 USD total for 4 guards). Please send either cash in USD or an international money order made out to the owner of RPM - Mr. Richard Royall. Since we don't normally sell direct, we have no way of accepting personal checks, credit card or PayPal payments at this time. I apologize for any inconvenience this may cause. Please send your remittance to:
RPM R/C Products
14978 Sierra Bonita Lane
Chino, CA 91710
USA
Once we receive your remittance, we will send your requests parts out to you the following business day. Please be sure to send your remittance via traceable method for your own piece of mind and security. Also, please be aware that the guards we have available are black in color.
Take care and thank you for your interest and support of RPM products. If you have any other questions or comments, please feel free to send us another e-mail.
xfactor
22-07-2015, 11:17 AM
Heres the boy :D With re-release white RPM gear cover purchased from MBmodels..........:thumbsup:
Click to enlarge
Peakey
22-07-2015, 11:38 AM
Ive been toying with the idea of getting one of these for a while now I might just have to take the plunge 😕
xfactor
22-07-2015, 01:52 PM
Nothing has been used all as NEW and completely original.
Peakey
22-07-2015, 02:13 PM
Have you got all your hard where for it? These a guy on Facebook that does a nice selection Team KKK
http://www.teamknkhardware.com/apps/webstore/products/show/5538080
You can get a lot of stuff in 4lb of shipping 😉
J77MYF
22-07-2015, 03:44 PM
I have an original RC10 Graphite Team Car. Might have to dig mine out too.
jameswilkinson7
22-07-2015, 05:12 PM
I have an original RC10 Graphite Team Car. Might have to dig mine out too.
Thats my car! :p
xfactor
22-07-2015, 05:59 PM
Ok, so here is the first pictures of the Graphite as I received it today.
The last Pictures shows my small cleaning kit for the mission ahead......:D:D
The Mrs doesnt know, so dont tell her.....;)
Click to enlarge pictures...
xfactor
22-07-2015, 06:04 PM
After all the excitement I forgot to remove the gear cover to see if there was a spur gear and slipper assembly.
So I just removed the cover. To my surprise its brand spanking :o
Click to enlarge pics...
xfactor
22-07-2015, 06:10 PM
Just to show you the differences between the Original RPM gear cover and the new re-release.
xfactor
22-07-2015, 06:16 PM
I am going to totally strip what is built on the RC10 Graphite and rebuild. This will include gearbox, diff etc.... with full rebuild pictures along the way.
I am starting tonight so more to come tomorrow......:thumbsup:
Peakey
22-07-2015, 09:15 PM
You always seem to land on your feet :thumbsup: looks good buddy. How did you get on with the shocks?
xfactor
22-07-2015, 10:04 PM
Just waiting on reply J,
BIG FAT FINGERS CROSSED.:)
Well have stripped it down tonight all of it is original. I stripped the slipper and gearbox down and all is brand new and original.
Teflon sealed bearings.
1st Edition Red slipper pad.
Layshaft
Idler
Felt between gearbox and motorplate all new.
I have washed, cleaned and polished all of it and the chassis is gleaming.I will post pictures tomorrow and THE REBUILD WILL BEGIN !!!!!
xfactor
22-07-2015, 10:07 PM
Forgot to mention.
Im after the 2 nylon nuts for the servo saver and arm. I have got a new white plastic servo saver kit but no nuts are in there. Its just the standard servo kit that comes as standard in the kit.
If anyone has 2 they would sell or know the part number that would be great.
Thank you.:thumbsup:
J'MM'N
22-07-2015, 11:35 PM
6282, if it's the 8-32 nylon nuts, they are still available.
xfactor
23-07-2015, 09:38 AM
JMMN,
Thanks matey really appreciate that. Thank you.:thumbsup:
xfactor
23-07-2015, 09:42 AM
Ok,
Last night I stripped and washed all parts. I have come to a decision on the RC10 and what to go for.
I will be fitting a Black Motor Plate rather than the GOLD.
I will be fitting Black graphite Front and Rear towers.
I was considering the fibre glass but want to keep it black and white and the graphite are a option. They are just plain not carbon pattern.
I am now posting pictures of it so far.........:thumbsup:
Stevebolt
23-07-2015, 09:47 AM
Had a graphite stealth back in the day , loved it .
xfactor
23-07-2015, 10:06 AM
So all parts cleaned ready for install. I was lucky enough to find a complete front end.
White wishbones, front hangers,front casters,front spindles,axles and hinge pins. Once stripped and cleaned have came up like new with no marks. I fitted new ballstuds,nuts,E-clips, new graphite black tower, white shock bushings and foamy things.:thumbsup:
Note the first Edition red slipper, new and never used.:woot: Diff showing driveshaft stopper washers installed.
Click to enlarge.
xfactor
23-07-2015, 07:23 PM
I was sorting out my new screws ready for the build and noticed there are 3 different styles of the same screw.
Here are the 3 differences from the dark green re-release screws to the light gold original and noticed that the other screw has a single raised dot next to the cross.
The first screw has the raised dot at approx 11.00 o'clock on a clock.. Sorry for poor picture.
Click to enlarge......
xfactor
23-07-2015, 07:30 PM
So I started the rebuild today. Following the manual its starts at the front of the Graphite. I was going with 3 washers under the post but will start with 2 until I have painted the body shell. So this is start..........:thumbsup:
Click to enlarge...
Peakey
23-07-2015, 08:07 PM
Looking good Mark, so your painting this shell then? Does that mean your going to keep it!!!!
xfactor
23-07-2015, 08:12 PM
You bet J,
This one is staying.:wub
Peakey
23-07-2015, 08:36 PM
You bet J,
This one is staying.:wub
😂😂😂😂😂😂😂😂 I'll believe that when I don't see it in the FS section :p
xfactor
23-07-2015, 08:57 PM
:lol::lol::lol::lol::lol::lol::lol: NO !!!!!
jayst
23-07-2015, 09:36 PM
ive already bagged all his cars lol :p
Retro RC
23-07-2015, 10:18 PM
You bet J,
This one is staying.:wub
I though you said that about your c2works :p
xfactor
23-07-2015, 10:22 PM
Lads Lads Lads,
hahahahahahahahahahaha please let me finish it first :thumbsup::thumbsup:
I have more to build/restore after this one also.
Gold tub WORLDS
B3 Factory Team restore
1 special one ?? ;)
xfactor
24-07-2015, 11:03 AM
Got to do a little more work on the Graphite. Pictures show rear wishbones, hinge pins and mounts cleaned. Rear bulkhead cleaned and fitted with new Wing posts, ballstuds, nuts and foamy things. Rear shock tower new graphite fitted with new screws,nuts,white shock bushings and white nylon shock nuts.
Starting to look like a RC10 Graphite now :D:D
Click to enlarge.....
MHeadling
24-07-2015, 11:14 AM
Looking good so far! Itll be finished by dinner time!
xfactor
24-07-2015, 11:28 AM
hahahahahaha,
I waiting on other bits from America and France so could be at a stand still soon:wub Think the hardest parts Im stuggling to get is the 2 white nylon 8-32 nuts for the steering/servo saver cant find them anywhere :(
Just had the Rear drive shafts turn up though :D:D:D
xfactor
24-07-2015, 07:41 PM
I have managed to do a little more to the Graphite today. New battery holder, servo mounts fitted and also a bonus fined of a brand new original RC10 aerial tube YEAH BABY !!!!! :D:D
I will be starting the best gear box ever made tomorrow.... The Stealth Gear Box...... Still by today's standards this gear box in my opinion is the best ever made. Diff is second to none and the box can still handle the power of a 7.5. 25 yrs old WOW !!!!!
Click to enlarge....
xfactor
24-07-2015, 07:56 PM
So parts I am waiting for are as follows,
1980s Lunsford Ti 7s Turnbuckle set.
Associated Shocks Front and Rear Teflon Coated.
Rear flanged Bearings.
Front Wheels.
And I still cant find 2 8-32 white blasted NUTS !!!!!!!!!:yawn::yawn:
Peakey
24-07-2015, 10:22 PM
What front wheels do you need buddy? And I'll see what I can do about the nuts oooo errrrr 😉
xfactor
24-07-2015, 10:38 PM
Hi J,
All sorted for wheels matey. Im waiting on the above to turn up. Its just those blasted white 8-32s X2 of for the servo saver and steering:lol::lol:.
Peakey
24-07-2015, 10:52 PM
I'm no good with imperial sizes but welshy has a pack of 4 40 if they might do?
xfactor
24-07-2015, 10:56 PM
4-40 are for the front wheels and shock nuts. :( 8-32 are basically the imperial size for 4mm metric......
Peakey
24-07-2015, 11:00 PM
These anygood?
http://www.ebay.co.uk/itm/like/361336378546?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=m&rlsatarget=&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover %252F1%252F710-134428-41853-0%252F2%253Fipn%253Dicep%2526icep_id%253D67%2526mt id%253D1673%2526kwid%253D1%2526crlp%253D5060020458 6_563391%2526icep_item_id%253D361336378546%2526ite mid%253D361336378546%2526icep_meta_categ_id%253D22 0%2526icep_etrs%253DN%2526icep_epid%253D-999%2526icep_ctlg%253D-999%2526icep_cond%253DNew%2526targetid%253D1063188 08466%2526rlsatarget%253D%2526rpc%253D0.07%2526rpc _upld_id%253D52799%2526device%253Dm%2526icep_msku_ flag%253Dn%2526icep_cbt%253Dy%2526adtype%253Dpla%2 526gclid%253DCOWZkKjv9MYCFUzHtAodE-EB1g%2526srcrot%253D710-134428-41853-0%2526rvr_id%253D872883699275
steve_haskins
24-07-2015, 11:39 PM
Looking good mate, 👍
Peakey
25-07-2015, 01:46 PM
Here they are
http://www.teamassociated.com/parts/details/6282/
xfactor
25-07-2015, 06:09 PM
You star J,
YOU DA MAN...........:thumbsup::thumbsup::thumbsup:
xfactor
25-07-2015, 06:11 PM
Looking good mate, 👍
Cheers Steveo,
Will look even better with one of your Viper Shells and AE Wings.......:D:D
xfactor
25-07-2015, 08:48 PM
Hi all,
Just a question really. I ordered the standard white ball cups that comes with all RC10 Teams,Worlds,Graphites,TQs, CE etc........
What has come in the packet are these. Now my question is,
Are these a Error OR are these a actual Ball cup from Associated. I have looked back to the first RC10 and they seem to all have the same white ball cup.
OR am I wrong.
Anyone Know ??
Thank you.
Click to enlarge.
xfactor
26-07-2015, 02:50 PM
Been working on the Graphite a little more so will up date pics shortly......:thumbsup:
xfactor
26-07-2015, 04:14 PM
So managed to get the Best Gearbox built up THE STEALTH BOX. I went for a new Black motor plate over the Gold as I have a plan for that one ;).
Pictures showing gearbox internals, felt, motor plate ready for slipper install.
Click to enlarge...
xfactor
27-07-2015, 09:26 AM
showing slipper and gear box fitted.
xfactor
01-08-2015, 08:45 PM
A little more work carried out on the Graphite. New carbon brace, body post and original RPM White gear cover fitted.
Click to enlarge........
xfactor
01-08-2015, 08:53 PM
I managed to get hold of a set of new Lunsford 7s Ti turnbuckles and new white ballends........:thumbsup:
Click to enlarge......
xfactor
01-08-2015, 08:59 PM
Next up Driveshafts and Hubs. I was lucky to get a brand new in packet driveshaft set.:D
Click to enlarge.......
xfactor
07-08-2015, 08:12 PM
Just a little update really.
I have managed to build and fit the rear shocks. Im waiting on front shock bodies to turn up. Once they are here I will build up install and post pictures.
I have also managed to get 3 piece front wheels new and new rear wheels. I will be collecting a new Viper body and wing from Mr Penguin himself tomorrow so should have that painted up by the end of the week...... Not sure on paint scheme yet.
Either,
1.Cliff Lett Moo
2. Traditional straight lines....:confused:
Peakey
07-08-2015, 08:18 PM
The nits are in the post dude he forgot to post them 😕 I've not forgot 👍
xfactor
07-08-2015, 08:25 PM
Thank you J,
:thumbsup::thumbsup:
xfactor
14-08-2015, 11:47 AM
Hi all,
Just to say the Graphite is complete now. I have got a Penguin Viper Shell that I still have to paint. After opening the Viper, I must say the shell is excellent quality and Wing also included, which is installed on the Graphite.
Im really pleased with the finish and the rear bumper finishes the rear off a treat............
I have a choice of new in packet wheels. 3 Piece front wheels, Kit lite weight wheels and Original 2 inch front wheels. I went with kit for the pics......
Once I have painted the Viper shell, I will mount and post pics........
Posting pics now for those who are interested...........:thumbsup:
xfactor
14-08-2015, 12:00 PM
Pictures of the RC10 Graphite Stealth........
Click to enlarge Pictures.....
Chillout47
14-08-2015, 12:39 PM
Wow, that's a very nice looking car.
xfactor
14-08-2015, 12:58 PM
Thank you Chillout,
Still have the body to paint, once I have painted I will post that......:thumbsup:
Peakey
14-08-2015, 01:19 PM
Looks really good mark as always :thumbsup:
MHeadling
14-08-2015, 02:51 PM
Wow! Looks great, nice job! :thumbsup:
xfactor
14-08-2015, 02:54 PM
Cheers Marko...........:thumbsup:
ralphee
14-08-2015, 03:01 PM
Mark, shes the mutts nuts, the dogs danglies, the pooches peennn....ahem, wow, really great job mate, another killer build, your a man after my own heart, cant wait to see the bodyshell buddy!
Lee
xfactor
14-08-2015, 03:54 PM
Mark, shes the mutts nuts, the dogs danglies, the pooches peennn....ahem, wow, really great job mate, another killer build, your a man after my own heart, cant wait to see the bodyshell buddy!
Lee
HAHAHAH Cheers Lee, Should be around a week away. Not sure on design yet. Either Cliff Lett MoOO or Straight Line design......:confused:
toooldskool
23-08-2015, 10:49 AM
just got a project car coming to me off the bay, will be referring to this thread a lot. I think i'm going to go for a "patina" look rather than complete restore but things may change
xfactor
23-08-2015, 11:33 AM
:thumbsup: Post pics toooldskool when you get it nice one..:thumbsup:
toooldskool
23-08-2015, 01:51 PM
http://i1285.photobucket.com/albums/a595/Clive_Apperley/_26_zpsicy4a8zq.jpg (http://s1285.photobucket.com/user/Clive_Apperley/media/_26_zpsicy4a8zq.jpg.html)
pic off advert
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.