PDA

View Full Version : The Ten4 project, in case you havent seen it yet


gomachv
25-07-2015, 07:05 PM
Here is the Ten4, a B44 and a RC10 collided and this is what it morphed into! A few parts are shapeways and the store will be open soon. The shock towers will be available from me. Robinson Racing is making the pulleys and idler gears. The rest is easily optained from your hobby shop of choice.

http://www.rc10talk.com/download/file.php?id=100487&mode=view

http://www.rc10talk.com/download/file.php?id=100486&mode=view

http://i124.photobucket.com/albums/p29/mk-Zero/RC/20150511_225341_zpswlyk7xxd.jpg

http://www.rc10talk.com/download/file.php?id=100225&mode=view

http://www.rc10talk.com/download/file.php?id=100223&mode=view

Peakey
25-07-2015, 08:05 PM
Stunning work as always Jeff :woot::thumbsup:

xfactor
25-07-2015, 08:37 PM
Is this going to be sold in kit form. If so how much is it expected to be as the MRS can start saving now for Christmas.......:D

Also what will you get in the kit.

Sorry if this has been asked...... Looks stunning........:thumbsup:

Peakey
25-07-2015, 08:54 PM
It will be sold but you'll have to order the the plastics off shapeways and the rest from Jeff.

http://www.rc10talk.com/viewtopic.php?f=35&t=37839

grovenik
25-07-2015, 08:58 PM
Very nice, what's a rough cost to build one of these?

gomachv
25-07-2015, 09:25 PM
Assuming you have nothing to start with.....all prices approximate
$199 world's kit
$112 b44 and other oem parts from Tower, see list below
$40 shock towers
$100 shapeways printed parts
$50 pulleys and idlers

Prices are just estimates except I'm sure I can hit the $40 towers. The rest is out of my hands. Some may want their own take on it, so prices and items may change.


TEN4 conversion kit

OEM parts that you will need: (this is assuming a Champ Edition with Stealth, Team Car, or Worlds car)

Front Wheels:
9767 Fr wheel (or compatible)

Front Drivetrain:
3438 Low Profile 8-32 nuts
7369 Axle Pin
9647 Steering Spacers
9749 Front CVA Kit
9750 Wheel Adapter
9751 Bearing Spacers

Steering:
6252 Worlds steering set (Just need pivots)

Front Transmission:
3926 Diff Rebuild kit
6577 RH Outdrive
6578 LH Outdrive
6580 Diff Gear
6581 3/32 Balls

Rear transmission
6565 stealth case (only needed on ReRe worlds)

Rear Suspension:
6262 Turnbuckle (1.65”)

Bearings:
DTXC1437 3/8 x 5/8 (2)
DTXC1423 3/16 x 3/8 (6)
DTXC1411 5/32 x 5/16 (2)
DTXC1401 1/8 x 5/16 (2)
3/16 x 3/8 Flanged (2) (may change!)

Nose Plate:
6310 Nose Plate (must NOT be cut style, mostly needed for Worlds kits)

__________________________________________________ __________________________________________________ __________________________

As of June 21, 2015 these parts total $111.40 from Tower Hobbies without nose plate, coupons or shipping

All Parts can be sourced as needed from other manufacturers

xfactor
25-07-2015, 09:30 PM
Ok lovely. The Mrs can now start working over time.....:thumbsup::thumbsup::thumbsup:

steve_haskins
25-07-2015, 10:24 PM
Awesome,

Welshy40
26-07-2015, 09:41 AM
Looks good, almost identical to the mip design

OptimaFan
26-07-2015, 10:41 AM
Nice. Btw, on the second picture, it seems the front belt pulley gets pulled a little back and seems to make a little angle, due to belt tension?

gomachv
26-07-2015, 01:24 PM
Pulleys are just sitting there in the pic with no idler or shaft. Prototype pulleys are in the mail from Robinson Racing so I'll update soon

OptimaFan
26-07-2015, 02:36 PM
Ah, I see. I was already wondering why the belt wouldn't start jumping off the pulley, as it was angled like on the picture. But if part is a mock-up, it makes more sense.

You have good contacts @ Robinson, it seems. I once asked them for a pinion with 3.2mm hole instead of 2mm, and that was about impossible to pull off, it would cost a lot of money. While it wasn't even a custom part, just drilling a different size hole.

gomachv
11-08-2015, 01:58 PM
Here are the prototype pulleys and idlers, as well as some very trick diff gears. The final versions will be heat treated and anodized.

http://www.rc10talk.com/download/file.php?id=100725&mode=view

http://www.rc10talk.com/download/file.php?id=100726&mode=view

http://www.rc10talk.com/download/file.php?id=100724&mode=view

Brian has made a quick video of his Ten4, almost ready for a shakedown on the track

gpMBGNte9Gc

DanB4
15-08-2015, 03:42 PM
Got most parts now - just need to order the shapeways bits and I'm good to go :)

Thanks again Jeff!