TM2 V2 Centre CVD Replacement

[Bizz]

Hey guys,

Have noticed that the pin that attaches to the slipper/spur assembly on the centre CVD on my TM2 V2 is looking extremely worn, part number is T04044 - 83mm Center CVD.

Having a nightmare trying to find a UK sourced part, anybody got any ideas as my usual Inside Line/MB Models/JE doesn't find anything, they've got them on eBay from the states if all else fails.....

Ta much in advance :)

[InsideLineModels]

Hi, we can get that in for you if you want to give us a call.

The reason we don't stock it is because most people upgrade to the machined steel gear and updated shaft when it gets to the point of replacing parts.

The upgrade parts are TS413 and TU0456. Together they come to £40. The T04044 driveshaft is £30.50

If you want any help feel free to call

Regards
Kev

[Clive Loynes]

Hey guys,

Have noticed that the pin that attaches to the slipper/spur assembly on the centre CVD on my TM2 V2 is looking extremely worn, part number is T04044 - 83mm Center CVD.

Having a nightmare trying to find a UK sourced part, anybody got any ideas as my usual Inside Line/MB Models/JE doesn't find anything, they've got them on eBay from the states if all else fails.....

Ta much in advance :)

You could take a look at this.

https://www.facebook.com/768872353145927/photos/pcb.1016833005016526/1016831861683307/?type=1&theater

Should last for twelve months then. ;-)

[ianjoyner]

I've been running Clive's C-Drive fitted to the upgraded shaft listed by Kev most of this year and the wear has been drastically reduced.