PDA

View Full Version : RC10 Graphite


toooldskool
07-09-2015, 08:52 AM
the rebuild of my Graphite is coming along , it's not 100% as original as I will be using modern electronics and have used a couple of bits off other cars I have lying around.
I have an old type slipper and wondered if people recommend using a more modern http://i1285.photobucket.com/albums/a595/Clive_Apperley/P1010913_zpsibpbxxbh.jpg (http://s1285.photobucket.com/user/Clive_Apperley/media/P1010913_zpsibpbxxbh.jpg.html) type

Peakey
07-09-2015, 11:51 AM
Can't you put a B4 shaft in it or something and use a new slipper? Or am I going mad and heard something totally different :confused:

toooldskool
07-09-2015, 06:07 PM
yes that is what i'm thinking of doing, just wondered if that was the norm or people carried on with the old type slipper

xfactor
07-09-2015, 07:01 PM
You will not be able to fit a B4 layshaft in a original Stealth box I believe.

The B4 Layshaft is what early RE-RE worlds kits needed as the shaft was machined too short allowing the back slipper plate to hit the motor plate.The B4 shaft was machined in a different place allowing clearance of the slipper plate. Now included in second batch RE-REs

The Worlds RE-RE idler is I believe a different size including different size bearings.

Part number WORLDS RE-RE IDLER GEAR= 6569

Part number ORIGINAL STEALTH IDLER=6570

I maybe wrong but contact CML to clarify the above, but I think Im right.

The single slipper will more than handle 10.5-9.5 I would not go much below this. I know people running 10 double brushed with lipo with single slipper pad and it handles it no problem.

Hope this helps..............:thumbsup::thumbsup:

toooldskool
07-09-2015, 08:41 PM
Thanks for the good info,10.5 planned so will continue with old slipper

xfactor
07-09-2015, 08:56 PM
:thumbsup: That will be ok matey......:thumbsup:

toooldskool
12-11-2015, 12:00 PM
ready to roll 10.5 brushless and lipo

http://i1285.photobucket.com/albums/a595/Clive_Apperley/002_zpsoj0ygxl9.jpg (http://s1285.photobucket.com/user/Clive_Apperley/media/002_zpsoj0ygxl9.jpg.html)
http://i1285.photobucket.com/albums/a595/Clive_Apperley/003_zpszwqcijly.jpg (http://s1285.photobucket.com/user/Clive_Apperley/media/003_zpszwqcijly.jpg.html)

xfactor
12-11-2015, 12:06 PM
Oooooh YES !!!!!

AWESOME JOB...........:thumbsup: