PDA

View Full Version : K2


johnboy
18-09-2015, 11:51 AM
http://eos.redrc.net/2015/09/chassis-focus-michal-orlowski-5/

neallewis
18-09-2015, 07:01 PM
It looks awesome in the flesh, really nice design features. Will work well.

lost?
18-09-2015, 07:10 PM
Dear santa..... As ive been a good lad, this year could i have........

buggy#0
18-09-2015, 07:28 PM
The bodyshell looks a bit odd; as though someone took a KF2 shell but forgot it was going to be put on a 4WD, so they lumped some extra lexan on the edges. It kind of reminds me of the SX/SX2 shell.

It does look nice though, and it appears to have a very low CG. In practice it pulled out of the corners like no other car, it stays very flat under load, almost like a TC. Looked to have a little bit of understeer, as he was the only car (that I noticed at least) that wasn't able to sharply rotate around the apex at the end of the main straight. Could've just been a product of being quite stiffly sprung, it seemed to have a lot of rebound over the little doubles and small jumps too.

neallewis
18-09-2015, 07:46 PM
I'll watch orlowski tomorrow, only watched Dave Poulters so far. I doubt anyone has under steer at this track. I've removed six rows of pins and glued sidewalls in 4wd.
Car looks long and thin. Reminds me of Darc Durango.

buggy#0
18-09-2015, 08:14 PM
Michał said they were trying to get some more steering from it, but it ended up with less, which explains the lack of rotation.

I didn't see it grip roll a lot though, and he only had 3 rows off on the front and one off on the rear. 8th on the first day is a very strong start.

steveproracing
18-09-2015, 09:14 PM
Both roll bars look so thick on michals car though. Plus stiffish springs on front. That has to be contrabuting to the understeer. But as ever with setup its balance.

schmacher
19-09-2015, 12:26 AM
guess i could use the sx3 body on it

madmulc
27-09-2015, 08:32 PM
Any news on when it will be released?

mark christopher
27-09-2015, 08:49 PM
Probably after the world's before Xmas

hansie
28-09-2015, 01:30 PM
Hello all,

I have been running schuey 4WD buggy's since the release of the SX3.
So I have a nice supply of spares for my current K1 (soon to be retired).
Do we know which parts will carry over from the K1?
I am hoping arms, hubs, diffs, steering blocks, etc.

Regards,

Hans

h0m3sy
25-10-2015, 11:26 AM
Any word on a release date for the K2?

johnboy
25-10-2015, 02:08 PM
Any word on a release date for the K2?

Word on the grapevine is the middle of Nov

lost?
25-10-2015, 02:22 PM
some shops stating available mid november to pre order.

honrico Diablo
16-11-2015, 04:23 PM
http://www.racing-cars.com/pp/Car%20Showroom/CAT_K2.html

johnboy
16-11-2015, 04:44 PM
Looks really good Schumacher released another top car.

Sorry old faithful K1 time for retirement.

micholix
16-11-2015, 05:59 PM
This Cat looks so good, i may have to change the brand for the 4wd!?

I was allready nearby, to buy a K1, when it came out, than i decided to stay with my dex, but now i think, i cant resist anymore....:wub

Actually, i like, they use some parts from the sv and sx on this car, i still have a nearly new svr and some spares, so i can carry some of the parts over, if i get one of these?

mark christopher
16-11-2015, 07:58 PM
allot were running them at worksop, looked good and Danny took ftd I believe. had a good look round his and looks really nice bit of kit

gear box tops are the same rear arms are sv2 I think by the looks , front arms same, front caster block different
front inboard mounts same, new ball cups should never pop off


New - Alloy chassis side stiffeners.
New - Multiple battery fitting options. Saddle and shorty options.
New - Captive ball joints.
New - Reverse rotation, mid motor layout.
New - Split top decks for greater flex characteristics and easier maintainance.
New - Compact steering system for improved in-line weight placement with adjustable, dynamic ackerman.
New - Super consistent, industry leading QUAD pad, vented slipper with easy access and NEW Ultra Fine adjustment spring.
New - Optimised narrow chassis shape to improve roll stability. Improved ground clearance on roll.
New - Aerial mount.
New - Ultra low motor mount.
New - Rear pivot straps.
New - Battery thumb screws.
New - Transmission housings.
New - Longer wheelbase.
New - Centre-line motor position for lower polar moment.
New - Front yokes with adjustable roll centre heights.
New - Stronger outer rear hinge pin.
New - 2.5mm aluminium chassis.
New - 3.0mm aerospace grade carbon fibre top decks.
New - Moulded side pods for superb dirt protection.
New - Stronger front, inner hinge pins with new mounting system.
New - Easy access centre belt pulley.
New - Sleek, ultra narrow body shell.
New - Large “CLAW” high down force rear wing package.
Optimised 2 belt transmission with efficient low tension Bando belts running on large CNC machined pulleys.
Big bore shocks with big bore “CORE” springs, titanium nitride shafts, threaded collars and twin o-ring sealing.
Medium flex front suspension arms as standard.
Gear Differential with hardened steel gears and super hard outputs. Excellent Diff Life!
Optional ball diff available.
Strong steel universal driveshafts.
28 Rubber sealed, super precision ball bearings throughout.
Horizontally split transmission housings for easy diff access and maintenance.
Class leading suspension geometry with durable components and a huge range of optional alloy parts, offering adjustments to setup your CAT K2 to all track conditions.
Adjustable rear roll centres, inboard toe-in/toe-out, anti-squat and track width (using optional speed secret parts).
Adjustable front roll centres, rake angle and track width (using optional speed secret parts).
Strong, rigid 4mm aero space carbon fibre shock brackets

cmgreen
16-11-2015, 09:36 PM
:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup:

dwp102
16-11-2015, 09:48 PM
Does the motor rotate the same way still?!

badger5
16-11-2015, 10:12 PM
The motor rotates the same was as the SX3 so opposite of a K1

micholix
17-11-2015, 05:30 AM
As i'm realy want one of this Cats and i have to order from germany, i do have some questions, before i put the button to order...:)

Does the mounting system and cf strap for the shorty battery come with the kit, or is this an option? I couldnt find that in the discription?
Is it worth, or naccesery to upgrade to the aloy upper transmission housings?
And could someone please tell me, what parts i should order to carry as spares in my pit box, too?

This would be my first cat, so i dont have spares, exept a view from my svr, i saw, they could be interchangeable!?


Thanks in advance and

johnboy
17-11-2015, 06:28 AM
As i'm realy want one of this Cats and i have to order from germany, i do have some questions, before i put the button to order...:)

Does the mounting system and cf strap for the shorty battery come with the kit, or is this an option? I couldnt find that in the discription?
Is it worth, or naccesery to upgrade to the aloy upper transmission housings?
And could someone please tell me, what parts i should order to carry as spares in my pit box, too?

This would be my first cat, so i dont have spares, exept a view from my svr, i saw, they could be interchangeable!?


Thanks in advance and


Alloy upper gear box tops worth getting
Shorty battery strap kit is an extra but only £5.99
Spares the normal you would carry for any car.
You will like the cat I've been running the K1 and if the K2 is an improvement on that then will be a great car.

badger5
17-11-2015, 07:23 AM
I think you will find that the strap to mount a shortly in the transverse position is in the kit but to fit a shorty length ways is an option.

The front alloy upper gearbox top adds strength as the plastic one can break in a heavy crash.
The rear alloy upper gearbox top isn't really needed for strength but allows the rear shocks to be fitted on the rear of the wishbones.
The alloy front suspension pivot block also adds strength.
The Core RC Spring kits are very good and a reasonable price, normally kit pistons are good.

Looking at the kit set up for astro, the kit front springs are white while the rears are black. So the softest on the front and hardest on the rear?

micholix
17-11-2015, 08:27 AM
Thanks for that infos!:thumbsup:

Some more questions did come up.
Do you change the internal gearing often and if so, what is a common internal gearing? Or is the kit standard a good point to stay with?
On the manual, the shock covers are listed as an option, are they worth to get, too?

Thx again and

cmgreen
17-11-2015, 08:36 AM
Does the motor rotate the same way still?!

No, see pics :)

mark christopher
17-11-2015, 08:47 AM
Does the motor rotate the same way still?!

Yes the motor rotates the same as all motors, the pinion will rotate anticlockwise when looking from the pinion end.

mark christopher
17-11-2015, 08:51 AM
No, see pics :)

The motor rotates the same as any other motor. As in the pinion will rotate anticlockwise when looking from the pinion end.

cmgreen
17-11-2015, 09:04 AM
The motor rotates the same as any other motor. As in the pinion will rotate anticlockwise when looking from the pinion end.

Trick question I fell for LOL

johnboy
17-11-2015, 12:11 PM
[QUOTE=badger5;932267]I think you will find that the strap to mount a shortly in the transverse position is in the kit but to fit a shorty length ways is an option.

That's what I was referring to and the fella I was answering understood what my answers was.

micholix
17-11-2015, 12:19 PM
HolyMoly, that will be an shoping list by ~ € 700,-!
How to explain that my wife....:D

I could declare it as my personal christmas present!:woot:

mark christopher
17-11-2015, 07:26 PM
The motor rotates the same was as the SX3 so opposite of a K1


nope the motor rotates exactly the same in both cars....

badger5
17-11-2015, 07:41 PM
nope the motor rotates exactly the same in both cars....

In relation to the wheels the motor spins in the opposite direction to the K1.

There are other ways for you to put you point across, at the moment you're doing nothing for this thread. All understood what was meant!

Ross
17-11-2015, 09:05 PM
In relation to the wheels the motor spins in the opposite direction to the K1.

There are other ways for you to put you point across, at the moment you're doing nothing for this thread. All understood what was meant!

:thumbsup::thumbsup:

mark christopher
18-11-2015, 03:37 PM
In relation to the wheels the motor spins in the opposite direction to the K1.

There are other ways for you to put you point across, at the moment you're doing nothing for this thread. All understood what was meant!

Now you add a few extra words your comment is correct. How you and others answered originally implied that the motor needed to be reversed.
So as you say, there are other ways to put your point across. :thumbsup:

micholix
19-11-2015, 07:05 PM
I've preordered mine, hopfully it arrives at the beginning/mid of next week!?

Did anyone got his K2 allready?
If so, how are the first impressions?

marley
20-11-2015, 07:10 AM
I've preordered the k2 hopefully it'll arrive tomorrow or Monday. It's my first 4wd so can anybody suggest a good stating point for motor turn and gearing. I run on a medium-large size Astro track and I gear my 2wd kf at 76 spur 24-25 pinion with a 7.5 motor if that's any help. I was planning on building the kit pretty much from the manual and then working from there but are there any essential additions/upgrades that I should fit straight away. Thanks Andy

badger5
20-11-2015, 07:25 AM
Hi Andy, for Torch I would suggest the vented shock caps so you can run the shocks in emulsion set up, smoothes the car out over the bumps quite a lot.
The front alloy upper transmission housings a good to have for strength but not essential first off. I also use the alloy rear camber link on my K1 and KF2.

A 7.5 or 6.5 would be good motor wise, can't remember gearing but I expect something like a 22t pinion would be a good starting point for a 6.5.

Let me know how you get on, I'm getting mine delivered to where I'm working at the moment (Isle of Islay) and will build here. Look forward to seeing you at Torch and Newbury in December when I get home. :thumbsup:

Rich Roberts

marley
20-11-2015, 09:25 AM
Cheers for the info Rich, I've wanted a 4wd for a while and couldn't resist when I saw the K2 as it looks pretty cool.

nicVEGAchildJR
20-11-2015, 05:11 PM
i run on my K2 a 83T spur and a 21-22 pinion depending on track size

Lee1972
20-11-2015, 06:39 PM
I'm sure I've seen recently on here or the Internet a link to Michael Orlowski's set up for his K2 when he raced at the world's but can't quite remember where it was can anyone help?

nicVEGAchildJR
20-11-2015, 06:40 PM
its on schumacher website.

http://www.racing-cars.com/images/Technical_Info/Schumacher/Current%20Cars/CAT%20K2/Set%20Up%20Sheets/CAT_K2_MO_Worlds.pdf

Lee1972
20-11-2015, 06:43 PM
its on schumacher website.

http://www.racing-cars.com/images/Technical_Info/Schumacher/Current%20Cars/CAT%20K2/Set%20Up%20Sheets/CAT_K2_MO_Worlds.pdf

Thanks :thumbsup:

marley
20-11-2015, 07:02 PM
Does anybody know what spur the kit comes with?

tyreman
20-11-2015, 07:07 PM
83t.

marley
20-11-2015, 08:10 PM
83t.

Cheers :thumbsup:

knighthawk
21-11-2015, 06:52 AM
its on schumacher website.

http://www.racing-cars.com/images/Technical_Info/Schumacher/Current%20Cars/CAT%20K2/Set%20Up%20Sheets/CAT_K2_MO_Worlds.pdf

Is it just me or is this a blank sheet

badger5
21-11-2015, 07:27 AM
If your looking at this on an iPad or something similar then yes, but on a PC you will see the info. Something to do with the version of Adobe used to create the document.

Can anyone tell me what the kit springs are? Mine should be with me on Tuesday but going by one of the setup sheets they were white front and black rears? Softest on the front and hardest on the rear, which would seem a bit odd and extreme.

micholix
21-11-2015, 07:57 AM
If your looking at this on an iPad or something similar then yes, but on a PC you will see the info. Something to do with the version of Adobe used to create the document.

Can anyone tell me what the kit springs are? Mine should be with me on Tuesday but going by one of the setup sheets they were white front and black rears? Softest on the front and hardest on the rear, which would seem a bit odd and extreme.

The online manual says, or better its listed on the exploded view, front black and rear red springs.

Lee1972
21-11-2015, 11:43 AM
Is it just me or is this a blank sheet

It's you, works perfectly fine on my Android phone :p

nicVEGAchildJR
21-11-2015, 08:48 PM
If your looking at this on an iPad or something similar then yes, but on a PC you will see the info. Something to do with the version of Adobe used to create the document.

Can anyone tell me what the kit springs are? Mine should be with me on Tuesday but going by one of the setup sheets they were white front and black rears? Softest on the front and hardest on the rear, which would seem a bit odd and extreme.


Front springs are core rc black 4.1
Rear springs are core rc red 2.0

micholix
24-11-2015, 04:38 PM
Does anyone got his kit allready?
If so, are there any special built tips?
I was reading over on rctech, that you have to be carefull, when you built the ti rods and new ball studs, because the new ball studs are different in length!
Mine should arrive tomorrow, or latest the day after and i'm looking forward to the built at the weekend.:)

I do have one more question, i allways liked two hole pistons on my dex410 and i've ordered some for the k2 too, would it be good/better, to built the k2 with the kit standard pistons, or does have soemeone please a good starting shock setup for an indoor carpet track, with two hole pistons?

david85williams
24-11-2015, 04:47 PM
Hello,

Yes I built mine last night. Seems Schumacher made a few little errors with the instruction manual. Just be careful with the tie rods and pay attention to the ball stud lengths. Also the ball stud washers look very similar to standard washers. Make sure you have the correct ones to allow the ball stud to articulate correctly.

The only other problem I found was the kit shock oil wasn't enough to fill all 4 shocks. I thought I would start with the 35wt kit oil.

Space for electrics is very cramped if you want to keep the forward battery position available or use saddles.

I built mine with the kit pistons so I can't help with that question.

All the best with your build and enjoy!

bigalbi
24-11-2015, 05:04 PM
@Micholix

Michal Orlowski's Carpet setup is now available to download on Schumacher's website in the K2 setup sheets link if that's any help for a carpet start point?

micholix
24-11-2015, 06:27 PM
Thanks guys for that infos, i will take my time and i'm pritty excited to built this cat, as it is my first schumacher kit, that i built brand new...:woot:

I had a look at the setup sheets on the website, It looks like, i have to order some front and rear roll bar kits too, but for the first, i play with what i have.
The shop, i orderd the kit from, didnt listed it before, but i'll order some spares anyway soon...:)

How about the livetime of the belts?
Do they hold up well, or should i stock some in my pit box?

What i have or want is, arms, hinge pins(inner and outer), upper trans housings, front hub carrier and front blocks, did i forgot something?

Mostly it is, what you have in the box, you dont need and what you need, you dont have... ;)

tyreman
24-11-2015, 06:42 PM
There is an extra page with regards to the captured ball ends just follow that and you'll be fine.
Don't worry about the roll bars for now as they were mainly used for the EOS (according to Trish)
Just bear in mind that the setups that are on there are for the EOS carpet when they were using mini pins on the front, with the wide cut staggers they didn't use the front roll bar.

micholix
24-11-2015, 06:52 PM
There is an extra page with regards to the captured ball ends just follow that and you'll be fine.
Don't worry about the roll bars for now as they were mainly used for the EOS (according to Trish)
Just bear in mind that the setups that are on there are for the EOS carpet when they were using mini pins on the front, with the wide cut staggers they didn't use the front roll bar.

Thanks again for the info!

Ok, then i've ordered the wrong front tires, as i will get the mini pins for the front...:cry:
I've to look, if my LHS does stock wide front staggers, as these are not very common 4wd front tires here in austria, or i didnt see them!?:confused:

iank55
24-11-2015, 07:16 PM
What battery position are people going for initially?

Are the parts to mount it down the left in the box?

Cheers,
Ian

micholix
24-11-2015, 07:22 PM
What battery position are people going for initially?

Are the parts to mount it down the left in the box?

Cheers,
Ian

Hi Ian,

I'll run it with saddle packs, as i dont have shortys yet.

The mounts to run a.shorty length wise, is an option part #U4779.

Edit: i've got that info from mr. Chris Ashton, over in rctech:

Shorty in line – maximum agility, less stability, good for technical tracks.
Shorty transverse rear – maximum rear grip and stability
Shorty transverse front – maximum steering, good stability
Saddle – safe handling, more weight.

N7ELA
24-11-2015, 07:40 PM
Does anyone got his kit allready?
If so, are there any special built tips?
I was reading over on rctech, that you have to be carefull, when you built the ti rods and new ball studs, because the new ball studs are different in length!
Mine should arrive tomorrow, or latest the day after and i'm looking forward to the built at the weekend.:)

I do have one more question, i allways liked two hole pistons on my dex410 and i've ordered some for the k2 too, would it be good/better, to built the k2 with the kit standard pistons, or does have soemeone please a good starting shock setup for an indoor carpet track, with two hole pistons?

Make sure you rough up the slipper pads before installation as normal...

micholix
24-11-2015, 07:48 PM
Make sure you rough up the slipper pads before installation as normal...

Oh, thanks!

I much appreciat all that help!

I feel like a newbee, with all my questions....:eh?:

marley
25-11-2015, 06:51 AM
Hello,

The only other problem I found was the kit shock oil wasn't enough to fill all 4 shocks. I thought I would start with the 35wt kit oil.

They are pretty tight with the diff oil as well, when I got my KF it came with a bottle the same size as the kit shock oil and that only had to fill one diff.

david85williams
25-11-2015, 08:25 AM
They are pretty tight with the diff oil as well, when I got my KF it came with a bottle the same size as the kit shock oil and that only had to fill one diff.

I ended up using my own oil. I thought the bottle provided was going to be tight. I put 10,000cst in rather than the kit 12,500cst.

micholix
26-11-2015, 11:56 AM
Yea, my cat arrived!:thumbsup:

Nice Weekend is save....:D

danmurphy
27-11-2015, 02:36 PM
Can anyone clarify.. On the setup sheet for the camber link washers, are we including the 'ball stud washer' as 1mm or not?
Cheers.

micholix
27-11-2015, 02:47 PM
Can anyone clarify.. On the setup sheet for the camber link washers, are we including the 'ball stud washer' as 1mm or not?
Cheers.

Hi,

I've built just till step 14, the washers for the rear inner ball studs where included, i dont know about the others, but i think they should be, too!

Hope that helps?

PS.: Nice built so far! I'm impressed...:thumbsup:

Edit: sorry, i didnt understand your question correctly, i have not messured the thickness, but they looked like the same thickness as the aloy once...

N7ELA
27-11-2015, 04:14 PM
Can anyone clarify.. On the setup sheet for the camber link washers, are we including the 'ball stud washer' as 1mm or not?
Cheers.

Yes if it's a 1mm washer include it.

micholix
27-11-2015, 04:18 PM
Yes if it's a 1mm washer include it.

Yes, i mussured them, they are 1 mm!

Cruise
27-11-2015, 05:38 PM
As you can´t leave them out the ball stud washer is not counted as
camber link washer.

Cruise

micholix
27-11-2015, 08:30 PM
I think, this washer compensates the high of the hexagon on standard ball studs, so you start counting at the camber link washers, as Cruise sayed.

johnboy
28-11-2015, 02:10 PM
My K2 ready for its first run tomorrow.
As normal with Schumacher an excellent build and top quality car.

micholix
29-11-2015, 09:03 AM
Assambling the k2 was a incomparable joy:wub, i'm quit a bit sad, it didnt took longer!:cry:
Fit and finish is incredible and everything went together perfect!

Nice too, that the shock protectors are comming with the kit allready!:thumbsup:

Two things i noticed at the assambling:
I forgot to set the belt tensioner, the manual did not show when to set, or i missed that step!?
It is a bit of a pain, to set, after the complete building, you cant reach the nut with an nut driver very well because of the battery post at the rear and the chassis brace and side pod at the front...

One thing i noticed too was, as i instaled the steering servo, when you steer, or turn the servo horn up to the very front, there is some binding at the steering rack/arm(u4742) and the short socket(u4743), so the tires didnt turn fully to one side!
I cut/grinded a litte bit off of the socket and the problem was solved...

I do have one more question:
Could someone please tell me, how tight the belts should be adjusted?

micholix
29-11-2015, 11:55 AM
...

One thing i noticed too was, as i instaled the steering servo, when you steer, or turn the servo horn up to the very front, there is some binding at the steering rack/arm(u4742) and the short socket(u4743), so the tires didnt turn fully to one side!
I cut/grinded a litte bit off of the socket and the problem was solved...

...

I noticed, my servo was to much offset, or better, it was to much at the inside, so i will put some of those servo mounting shims behind it, to get it a little bit further out and line up the link.

johnboy
29-11-2015, 07:04 PM
First time out today with the car on slippy wooden floor and carpet at York.
First impressions are very good. The car is certainly a step up from the K1

micholix
29-11-2015, 09:11 PM
First time out today with the car on slippy wooden floor and carpet at York.
First impressions are very good. The car is certainly a step up from the K1

Congrats jonyboy and nice to hear!

I'm looking forward to the first run, i still have to fit the electrics.

felix777
30-11-2015, 05:00 PM
what configuration are we all tending to build them in?

johnboy
30-11-2015, 05:34 PM
what configuration are we all tending to build them in?

From what I ran and seen others run shorty across the chassis to the front

AmiSMB
01-12-2015, 06:45 PM
I noticed, my servo was to much offset, or better, it was to much at the inside, so i will put some of those servo mounting shims behind it, to get it a little bit further out and line up the link.

I had the same issue with a Sanwa servo in mine. I used some servo spacers that I had in my box (I am an R/C horder). I found I needed to space it out 6mm. I like running an aluminium servo horn and space the ball accordingly.

I ran shorty rear at the Off road Wars at the weekend and the car was really good. I had the FAB installed, 7.5 degree yokes, kit 35wt oil rear and Losi 37.5wt oil front using kit pistons and springs and all settings as per the manual. Car was very consistent.

marley
02-12-2015, 06:27 AM
Finished my build last night, all went well other than the 6 m3x16mm screws that hold the side pods on were missing :thumbdown:

danmurphy
02-12-2015, 09:44 AM
Finished my build last night, all went well other than the 6 m3x16mm screws that hold the side pods on were missing :thumbdown:

If you contact Schumacher by phone or email [email protected] they are very prompt at sorting out any issues like this. :thumbsup:

I ran mine on carpet last night, although I had to compromise on the rear tyres due to the track rules, the car felt really smooth, responded well to my setup changes whilst trying to reduce front end grip and had good rotation on a short and tight track.
Really pleased with it :thumbsup:

tyreman
02-12-2015, 11:24 AM
Finished my build last night, all went well other than the 6 m3x16mm screws that hold the side pods on were missing :thumbdown:

I do complete stainless screw replacement kits for £11.99 shipped
Www.screwz4rc.co.uk

madmulc
02-12-2015, 01:09 PM
If you contact Schumacher by phone or email [email protected] they are very prompt at sorting out any issues like this. :thumbsup:

I ran mine on carpet last night, although I had to compromise on the rear tyres due to the track rules, the car felt really smooth, responded well to my setup changes whilst trying to reduce front end grip and had good rotation on a short and tight track.
Really pleased with it :thumbsup:

Hi Dan, By any chance did you run at Stoke On Trent last night?

danmurphy
02-12-2015, 03:16 PM
Hi Dan, By any chance did you run at Stoke On Trent last night?

Yeah that was me!

aberscoob
18-12-2015, 03:21 PM
If you are using the alloy rear hubs you have to use the middle row of holes as using the top row causes the wheels to rub on the turnbuckle!

You could always use the old pop-on ends I suppose.

85648

I will be running the car for the first time this weekend after building it the day after it was released! :D

david85williams
21-12-2015, 08:25 AM
I find they can rub even with the kit hubs. Seems a bit of an oversight by Schumacher...

badger5
21-12-2015, 12:57 PM
The rear links also rub on the transmission housings if you use the allow rear link on the inner holes. I've had to go back to the older type links on the rear, seems like the captive ball joints are a bit too big! I hope Schumacher come up with a solution to this as I like to use the captive ball joints.

micholix
21-12-2015, 05:34 PM
Hello K2 owners, i'm still looking for a nice colour sheme for my cat.
I do have my main colour, it's a dark blue metalic.
My airbrush skills are poorly, so it should be not to difficult to paint....:blush:(but i would be thankfull of every kind of picture!)

Would you be so kind and post some pics of your cats for some inspiration.


Thx in advance and

Noob
21-12-2015, 05:42 PM
Anyone know who sells front pivot blocks but in black, U3556 ?

Dkfream
23-12-2015, 06:26 PM
Moss models has a set in stock, seen them today when I was down there

Noob
23-12-2015, 07:58 PM
Thanks dude, emailed message :thumbsup:

micholix
30-12-2015, 10:51 AM
Finaly, i'm finished my painting and i'm realy happy with it!:)

Lee1972
30-12-2015, 11:23 AM
Finaly, i'm finished my painting and i'm realy happy with it!:)

Nice job :thumbsup:

micholix
30-12-2015, 01:23 PM
Thx Lee1972!

HeavyD99
30-12-2015, 08:19 PM
@micholix, the depth of the blue looks amazing, but I hope you plan to run it with white wheels! Maybe it's me, but I just can't see dark painted buggies on the track anymore. Mine is at the painters currently, fluorescent colours for me!

micholix
30-12-2015, 08:46 PM
@micholix, the depth of the blue looks amazing, but I hope you plan to run it with white wheels! Maybe it's me, but I just can't see dark painted buggies on the track anymore. Mine is at the painters currently, fluorescent colours for me!

Thanks HeavyD99,

Yes, i do have some white weels, too.:D
First i wanted a combination with that blue-white and some brite lemon green, but decided to stick only with the blue and white, to keep it simple to paint for me, as it just was my third airbrush experience.

It is not that deep dark it may looks like on the screen, it was a cloudy day today and my cell phone does not make the best pictures, too.
The main colour is a transparent ultramarine, backed with silver and i did more layers at the edges to make them darker, the flat areas are a bit brighter.
May you can see it better from a photo from the top?

If i have to much trouble to see it, may i will do a painting with the green too? Eyes are getting worser as i'm 40+...:wtf:

micholix
31-12-2015, 11:26 AM
I was doing some adjustments on the camber linkages and steering and i noticed some sloop on the inner steering linkages, but only on the left hand side.
I never ran my car yet, so may i have a bad bearing, or the steering pivots does have to much play in the bearing!?
I reasambled the hole steering parts, as i first thought, i forgot a shims, or did something wrong, but everything is just like the manual sayes...

Could someone please be so kind, and check that on his car?


Thanks in advance, your help would be much appreciated.

knighthawk
31-12-2015, 05:10 PM
Has anyone tried running the car with the shorty lipo mounted transverse ?

Volition
04-01-2016, 09:52 AM
Hey guys,

Trying to find a slipper eliminator- I have the rcmadness one but its shred as I did not threadlock a screw and it backed out and got in the way.

Ideally like an alloy one.im going to try the Exotek yz2 one, but was wondering if you guys have a solution.

Running 17.5t stock