PDA

View Full Version : xx4 bulkhead black or white ?


Rob Fitzgerald
15-12-2006, 11:37 PM
I have some front bulkheads in my parts box with the same part number (1201)

one is black one is white - are these the same thing ?

TIA

PaulRotheram
15-12-2006, 11:46 PM
Nuh, the white one is more durable, it's alot more flexable and will last longer. The black one is just standard plastic/graphite i believe and was changed to the white version after lots of breakages.

barnyard
16-12-2006, 12:01 AM
it depends which black ones you have

gen 1 were replaced foc by losi because they shattered big style

gen 2 were near impossible to break but after a few meetings needed changing because the hingepin hole stretched big enough to fit your finger in (ok a bit of an exageration but you get the point).

gen3 white in colour - half way between the 2 will break with a big enough impact but lasts much longer before needing to be replaced due to slop

Rob Fitzgerald
16-12-2006, 10:03 AM
Thanks guys

Slimboyfat
16-12-2006, 11:22 AM
white one is the one to have, black one is very brittle and not worth bothering with.

Chrislong
16-12-2006, 01:25 PM
Is the kickup the same between the black and the white?

FifteenthNeo
17-12-2006, 07:58 PM
Is the kickup the same between the black and the white?

What is the kick up angle, does anyone know?

Also, I believe Trinity used to make alloy bulkheads that fitted the XX4 and the Streat weapon. Wouldnt that stop the need for the B3 brace mod?
http://img.photobucket.com/albums/v169/neo010969/48_1.jpg

tyreman
17-12-2006, 09:31 PM
What is the kick up angle, does anyone know?

Also, I believe Trinity used to make alloy bulkheads that fitted the XX4 and the Streat weapon. Wouldnt that stop the need for the B3 brace mod?
http://img.photobucket.com/albums/v169/neo010969/48_1.jpg

It would but then you would need to replace the chassis as they would just snap the front off.
The kickup is 0deg or 5deg, but the ones used on the XX4 are 10deg.

XXXCRRacer
18-12-2006, 04:36 AM
Use the white bulkhead. It is stronger, but I run the B2 front brace on my XX4.

Col
18-12-2006, 09:27 PM
What is this B2/B3 font brace conversion? How does this work and what does it do?
(I'm only asking for 2 reasons - I've just broke a white bulkhead and I can't find one online at the mo...)

Gayo
18-12-2006, 11:57 PM
Everything you need to know is here :
http://www.4wdrc.com/techbrace.htm

Col
19-12-2006, 10:32 PM
it all makes sense....
Cheers