PDA

View Full Version : Rory Culls 93 worlds car


Peakey
28-01-2016, 09:07 PM
Well this car sort of found me rather than me hunting for it. I was contacted on Facebook by a guy wanting to pick my brain about some cars that he had got from his uncle.
After a few messages he stated sending my pics of the cars and then this one pic came through and I spotted somthing in the background, which turned out to be a Rory Cull shell as that was his cousin. And a few more messages and then the pics of a couple of Yokomo's came through that were in desperate need of tlc and then I spotted this
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/19848F9E-0BA6-47CA-AC82-13D5285D956A_zpsxgjbmafl.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/19848F9E-0BA6-47CA-AC82-13D5285D956A_zpsxgjbmafl.jpg.html)

So this really got my attention so on further examination it turned out to be a 93WCS! Then it hit me and I remembered the thread on here about Rory's paint scheme and looked for it and this picture
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/192EEABF-50A3-4176-BF7A-078D657A3C1A_zpsxtptt05g.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/192EEABF-50A3-4176-BF7A-078D657A3C1A_zpsxtptt05g.jpg.html)

So a couple more messages and it turned out he had the shell too! Well obviously I tried to buy it then but he wouldn't sell it but said if he did I had first dibs.
So Saturday I got another message saying he was thinking of selling another car he had but was unsure as he liked it then joked he should sell the other cars. Well I jumped at the chance and a deal was done but not just for the worlds car but for Rory's old works 93 too!! Plus a couple of other bits that he had which turned out to be loads.
In the box I got a massive stash of wheels
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/C2F01666-C824-400F-8607-25541A72FF42_zpss8yuwyt7.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/C2F01666-C824-400F-8607-25541A72FF42_zpss8yuwyt7.jpg.html)

A NIP Protech body set
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/50AD8FC8-E50C-4D89-933C-1F4BD19420BA_zpsdlqgqgnj.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/50AD8FC8-E50C-4D89-933C-1F4BD19420BA_zpsdlqgqgnj.jpg.html)

2 used shells and selection of undertrays the protech on the right is the actual shell that was run at the 93 worlds on the WCS
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/69FAFFFD-847C-43BC-A3E1-0D577823D8E7_zps6ho0vrry.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/69FAFFFD-847C-43BC-A3E1-0D577823D8E7_zps6ho0vrry.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/8B98A435-09E6-49F1-87DC-661F8D03CBB0_zpsuc9bgsre.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/8B98A435-09E6-49F1-87DC-661F8D03CBB0_zpsuc9bgsre.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/3C223585-9FCC-4FE0-90C4-8A82350F6EFA_zpssdfap542.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/3C223585-9FCC-4FE0-90C4-8A82350F6EFA_zpssdfap542.jpg.html)

So the car itself like I said they both need tlc which they will get
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/4977E629-A5BE-452F-91FE-9252D0671933_zpsfgx1lhwr.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/4977E629-A5BE-452F-91FE-9252D0671933_zpsfgx1lhwr.jpg.html)

There's a little more left of te works 93 but that's a whole other car
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/70EAFF2F-191E-4FBA-B41C-28333780914D_zpso10qb5ua.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/70EAFF2F-191E-4FBA-B41C-28333780914D_zpso10qb5ua.jpg.html)

Looks like Masami wasn't the only one having trouble with stones at Basildon. This has a custom rear tower and camber link maybe Craig Dresher's dad made them as I know he use to make them parts for there cars.
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/18B47AC9-16E6-4E41-ACA0-EBB76892C675_zpsfmyhueus.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/18B47AC9-16E6-4E41-ACA0-EBB76892C675_zpsfmyhueus.jpg.html)

It's also had the step smoothed out of the bulkhead
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/95304E38-4A21-4229-8167-21757C62CF52_zpsctorl9s6.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/95304E38-4A21-4229-8167-21757C62CF52_zpsctorl9s6.jpg.html)

Few more pics
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/F42AB4C7-5047-4C07-AA4B-15C87194C643_zpslhhtlugd.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/F42AB4C7-5047-4C07-AA4B-15C87194C643_zpslhhtlugd.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/379C63CB-7359-46DC-B815-30A8B8A40E9F_zpseyatwokh.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/379C63CB-7359-46DC-B815-30A8B8A40E9F_zpseyatwokh.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/934DA054-B369-422E-B1DC-C6796D03CA9C_zpskugf1z9k.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/934DA054-B369-422E-B1DC-C6796D03CA9C_zpskugf1z9k.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/C69A016D-C15C-4661-B90E-369E86F05418_zpswgrrdx04.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/C69A016D-C15C-4661-B90E-369E86F05418_zpswgrrdx04.jpg.html)

Apparently Rory finished 19th which is a dam sight better than I would of done :lol:
I am over the moon to have somthing with this history in my collection and I hope you all like the pics :thumbsup:

Vintage Rocks!
28-01-2016, 10:47 PM
A racer with excellent provenance! I'm very jealous

Retro RC
28-01-2016, 10:58 PM
You bl**dy jammy bugger well done on another good find

Peakey
28-01-2016, 11:35 PM
Thanks guys I do feel privileged to own a piece of history

daz75
30-01-2016, 11:04 AM
Seen better days I'm always amazed when people sell cars like this why on earth would you get rid of a car that you raced in the world champs mad

How much did it cost ;)

RJJ
30-01-2016, 11:20 AM
Very cool and another epic find Justin

racingdwarf
30-01-2016, 11:53 AM
Nice find you lucky git! They look a lot more tired and un loved than when I last would have seen those cars and shells track side, quite a bit of work for you there.

Peakey
30-01-2016, 04:42 PM
Seen better days I'm always amazed when people sell cars like this why on earth would you get rid of a car that you raced in the world champs mad

How much did it cost ;)

I know I'm surprised that he let it go to e fair and it was alot cheeper than you may think, less than I offered you :p

Very cool and another epic find Justin

Thanks Rav and you know me I like to hunt :D

Nice find you lucky git! They look a lot more tired and un loved than when I last would have seen those cars and shells track side, quite a bit of work for you there.

It's a great find and I am lucky, the hard part is going to be replacing it with the correct parts it had.

Welshy40
31-01-2016, 06:20 AM
Blimey, i raced most probably against both cars in those pictures, yup basildon track was a nightmare at the warm ups as they had to use gravel due to the rain. Amazed he didnt keep them. Justin your a jammy git, really jammy.:lol:

OldTimer
31-01-2016, 11:36 AM
Looking forward to see them in a restored condition, should look awesome.

I can remember racing at the Warm Up meeting at Basildon to, and camping there with a leaky tent lol :woot:

daz75
31-01-2016, 12:06 PM
I know I'm surprised that he let it go to e fair and it was alot cheeper than you may think, less than I offered you

:D mine ain't in bits and rusted to xxxx tho :thumbsup:

xfactor
31-01-2016, 01:14 PM
Awesome J,

If it was me, I would leave them exactly as they are and store them in a cabinet. Totally original with the dirt,dust and rust. I would leave them......

Well done getting them matey.............:thumbsup:

Peakey
31-01-2016, 02:25 PM
:D mine ain't in bits and rusted to xxxx tho :thumbsup:

This has some decent history behind it and yours is in bits well parts that should be on it aren't :p

Awesome J,

If it was me, I would leave them exactly as they are and store them in a cabinet. Totally original with the dirt,dust and rust. I would leave them......

Well done getting them matey.............:thumbsup:

Thanks mark I won't clean it I think but it'll get rebuilt to how it would of left the track :thumbsup:

xfactor
31-01-2016, 02:28 PM
:thumbsup:

On buggies like this matey its what I would do. All the history matey.:thumbsup:

Love em !!

daz75
31-01-2016, 04:48 PM
This has some decent history behind it and yours is in bits well parts that should be arent

Parts are there tho mine raced against a world champ does that count :D:p

Peakey
31-01-2016, 06:40 PM
Parts are there tho mine raced against a world champ does that count :D:p

So did mine and he made 19th with it which is a dam sight better than I could :lol:

JamieB76
31-01-2016, 09:18 PM
Agree with rebuild no cleaning.. How much you selling the wheels for?

Peakey
31-01-2016, 09:34 PM
Agree with rebuild no cleaning.. How much you selling the wheels for?

£15 a pair but I might of sold the lot to a guy I'll let you know :thumbsup:

DerbyDan
01-02-2016, 11:24 AM
Find of the decade Justin!

What to do with them.... its a very good question!

I'd be so tempted to rebuild the Works & race the car... I'm guessing this would have been a car that Rory would have run at UK national events... so would have less provenance than say the WCS - but one perhaps that Rory himself would have had more affection for?

The WCS is a tricky one - the car (or what remains of it) Looks to have received some home-made parts (poss crafted by Craig Drescher's dad?) Since the car had raced at the Worlds. The photo of the car on the grid seems to show the 'standard' 93WCS rear end - with white bulkhead cap & 'eared' horizontal inner camber link set-up, The home made parts converts that rear end to something similar to the set-up that 1st appeared on the 94 YZ-10. Do you revert it back to the spec of the car on the grid at the Worlds - or simply rebuild the car as it currently stands, adding the missing parts to make it a rolling chassis again?

Welshy40
01-02-2016, 11:34 AM
So did mine and he made 19th with it which is a dam sight better than I could :lol:

Rory was Mr consistant and was what put him into all the national A finals he entered into. Great driver and great find, id do it up and wouldnt race it, rare big time.

daz75
01-02-2016, 11:51 AM
The pic at the world's also has white shock towers

Peakey
01-02-2016, 12:22 PM
It's definitely got the white cap on but it's also running the black rear tower there's a better pic here

http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/BC0D75A7-1954-4B98-8BAA-70BC3E19AE26_zpsocccn80t.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/BC0D75A7-1954-4B98-8BAA-70BC3E19AE26_zpsocccn80t.jpg.html)

As for rebuilding that will take some planing and searching I think but it will never get raced again to be fair

DerbyDan
01-02-2016, 01:38 PM
Do you know I've never seen the Model Cars Magazine report of the 93 Worlds... that's a great scan & awesome to see that image of Craig's WCS from the event... so much emphisis was put on Masami's Worlds winning car that it seems finding images of any of the others are so few & far between.

Its quite clear that the rear tower on Rory's car was/is black but the rear upper link connection looks to me, to be the std 93WCS arrangement;)

http://img.photobucket.com/albums/v228/DerbyDan/Yokomo%2093%20WCS/RoryCullWCSa_zps130kxugf.jpg

Peakey
01-02-2016, 07:38 PM
You've got better eyes than me Dan! I can't make the ZD-30 camber link but I can see there's nothing over the bulkhead cap.
From looking at the cars in the artical most of the WCS's had standard front ends the most change I can see it carbon front towers but it seems to be the rears that have been modded so they may of been struggling to get the rear sorted?

daz75
02-02-2016, 04:59 PM
Wonder if mine has loads of carbon on it due to being a ex team drivers car or something would love to know who my dad bought it off at the time assuming it was second hand

Peakey
02-02-2016, 07:28 PM
Wonder if mine has loads of carbon on it due to being a ex team drivers car or something would love to know who my dad bought it off at the time assuming it was second hand

It would help if you found some pics of yours from when you had it if you could find some. If it was second hand maybe it came with another shell?

daz75
03-02-2016, 12:33 AM
Was a long time ago mate not sure about photos don't remember a different shell either lol

Peakey
16-04-2016, 11:07 AM
I took the car out the garage the other night and then decided to do a little with it. So after a lot of thought I just decided to give it a little tidy up and start to rebuild it the main problem I can see I'm going to have is the M2 slipper so if anyone has s M2 slipper plate then that would be a great help.

http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/F65E7853-8283-4901-8EAD-14C1CE2F265B_zpsikepzmbt.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/F65E7853-8283-4901-8EAD-14C1CE2F265B_zpsikepzmbt.jpg.html)

Modded rear hub
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/64AB9D9F-1FBB-48E2-B15A-9F9FB8112EC8_zpsljnpz2je.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/64AB9D9F-1FBB-48E2-B15A-9F9FB8112EC8_zpsljnpz2je.jpg.html)

Luckily the lightweight rear diff is in
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/02630782-CC78-4E9C-B837-01C97408B097_zpsbcn0n6bl.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/02630782-CC78-4E9C-B837-01C97408B097_zpsbcn0n6bl.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/4612656B-1067-4758-81A9-2BDF49EBE074_zpsea6o4wrj.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/4612656B-1067-4758-81A9-2BDF49EBE074_zpsea6o4wrj.jpg.html)

So it's had a little clean and tidy up
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/713E6272-75E5-4B73-9469-EFFE858DB547_zpsjqwaarw3.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/713E6272-75E5-4B73-9469-EFFE858DB547_zpsjqwaarw3.jpg.html)

Improvised front diff for now till I find the correct one
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/9B9518B2-2C09-460A-AECD-52EB86A6F2D3_zpsxamafn7e.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/9B9518B2-2C09-460A-AECD-52EB86A6F2D3_zpsxamafn7e.jpg.html)
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/A79DDCE9-4A74-44A6-B2D8-0A57360408A3_zps42kpns42.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/A79DDCE9-4A74-44A6-B2D8-0A57360408A3_zps42kpns42.jpg.html)

No more rusty shafts or roll bar
http://i1345.photobucket.com/albums/p662/peakey29/Rory%20cull%20WCS/F1C5B41E-9C67-4D19-8A3D-DFAB983E7FCD_zpswzklyc1q.jpg (http://s1345.photobucket.com/user/peakey29/media/Rory%20cull%20WCS/F1C5B41E-9C67-4D19-8A3D-DFAB983E7FCD_zpswzklyc1q.jpg.html)

That's as far as I got for now but if anyone has a M2 slipper plate or could point me in the direction of one would be a great help, or if they made a M2 hardened gear like they did with the M3 that's changable that would be perfect. The same if anyone has a M2 lightweight WCS front diff knocking around (I know massive long shot but worth a try)

DanB4
18-04-2016, 10:41 AM
I had all that mate remember all NIP, pretty much gave it away!

zzzubbb
18-04-2016, 02:10 PM
JP, Nice work, what did you use to clean up the ARB and shafts?

Peakey
19-04-2016, 12:38 PM
JP, Nice work, what did you use to clean up the ARB and shafts?

I used Autosol buddy and ran the driveshafts and wing mounts in a drill :thumbsup:

zzzubbb
19-04-2016, 12:45 PM
Buddy,

M2 spur adapter here (http://www.end-of-line-rc.com/yokomo-main-gear-adapter-24t-m2-pitch?search=Zc&page=2)..

Dadio
19-04-2016, 03:15 PM
thats cleaning up nicely ,caustic soda also takes the oxide of aluminium but don't leave the parts in too long as it will eat them eventually ,good for bits you can't spin up in a chuck to polish ,wire wool's good too.

mporter2000
19-04-2016, 06:13 PM
Whats good for cleaning black plastic?

Peakey
19-04-2016, 06:47 PM
Buddy,

M2 spur adapter here (http://www.end-of-line-rc.com/yokomo-main-gear-adapter-24t-m2-pitch?search=Zc&page=2)..

Thanks Neil but that's not the one, I need the slipper back plate which is ZD-671 which is 22 tooth M2 pitch

Peakey
19-04-2016, 06:48 PM
Whats good for cleaning black plastic?

Depends what it is, I cheated and just changed the rear cap and the arms I just used baby wipes

Peakey
19-04-2016, 09:05 PM
These are the parts I'm in need of if anyone knows of any

ZD-5031 front and rear pulleys M2 pitch FOUND
ZD-501 front out drives
ZD-674 Front One-Way Drive Pulley is 22 Tooth M2 pitch
ZD-671 22 Tooth slipper hub M2
ZD-653 front belt M2 Pitch 262 Tooth

daz75
19-04-2016, 11:24 PM
Not entirely sure what the part number is on the below but is this anything you need

http://pages.ebay.com/link/?nav=item.view&id=262395634528&alt=web

Peakey
20-04-2016, 07:37 AM
Thanks Daz but I think there the works 91 pack, I have found the pulleys so that's 1 off the list

Dadio
20-04-2016, 08:04 AM
Whats good for cleaning black plastic?

For plastics you can start with trying a dishwasher ,obvoiusly not on lexan/polycarbonate or anything electrical though ,put the parts in the cutlery tray when the wife's out .

daz75
20-04-2016, 11:05 AM
Is there any one who can make copies of belts from originals?

Retro RC
20-04-2016, 11:25 AM
Yup anything you want really as long as you know the profile and number of teeth

http://www.beltingonline.com/rubber-timing-belts-40/

Peakey
20-04-2016, 05:01 PM
And apart from M2 as there special order with a min quantity 😩

daz75
20-04-2016, 07:04 PM
And apart from M2 as there special order with a min quantity 😩

Doh what's the minimum?

Peakey
20-04-2016, 07:47 PM
Depends on the size and then ther supplier apparently can be from 500 upward :thumbdown:

daz75
20-04-2016, 07:51 PM
Depends on the size and then ther supplier apparently can be from 500 upward :thumbdown:

Lol more than there are 93WCS apparently would they fit anything else

Retro RC
20-04-2016, 09:38 PM
Ouch :thumbdown:

Peakey
20-04-2016, 11:12 PM
Lol more than there are 93WCS apparently would they fit anything else

No they were specific to the WCS but......... I may of found a belt I've got a guy in Korea checking his stash so fingers crossed. I've also found the diff pulleys so the lists already getting smaller.