View Full Version : Servo saver to fit a SV2/KF/KF2?
AdrianH78
06-05-2016, 11:18 AM
Hi
Just wondering if anyone can recommend a servo saver that can sit in the tight bulk head on a SV2 in my case, but I think the assembly is the same as a KF & KF2 :)
Thanks
Adrian
ianjoyner
06-05-2016, 12:37 PM
Have you been breaking the horn / servo? With an alloy horn and decent servo you shouldn't really need one.
Groomi
06-05-2016, 01:34 PM
http://www.racing-cars.com/pp/Old_Cars_and_Parts/Riot/U2882.html
U2882 from Schumacher. I run it on all my Cougars.
If you use any of the plastic spacers for your servo mount, then you may need to just file a slight bevel to the top edge of the servo saver, otherwise they squeeze in just fine.
AdrianH78
07-05-2016, 07:52 AM
http://www.racing-cars.com/pp/Old_Cars_and_Parts/Riot/U2882.html
U2882 from Schumacher. I run it on all my Cougars.
If you use any of the plastic spacers for your servo mount, then you may need to just file a slight bevel to the top edge of the servo saver, otherwise they squeeze in just fine.
Very nice, thank you :) :thumbsup:
AdrianH78
07-05-2016, 07:57 AM
Have you been breaking the horn / servo? With an alloy horn and decent servo you shouldn't really need one.
I don't seem to be having much luck with servos currently so need to do everything in my power to protect them, just in case it is me! :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.