Mardave meteor upgrade axles.

[wildoliver]

To continue the latest trend of meteor parts wanted!

I'm after one or 2 sets of the upgrade axles especially rears that fasten the wheels on with nuts, I can easily make the fronts as I did when I sheared mine racing, but the rears are too complex.

Can anyone help me finish off my 2 back in the day racers?

[Miggers]

You can use Cobra rear axles.

Put a long(about 12-15 mm if memory serves)M3(again,if memory serves)grub
screw(threadlock it in)into the wheel reataining screw thread and use a nut/washer
to hold the wheels on.

Again if memory serves(he is 56 you know),you'll need a spacer on the axle between the outer bearing and the drive pin,white Tamiya nylon axle bushings fit perfectly.

You'll still be inside the BRCA 10" limit for width.

[wildoliver]

Many thanks for that!

[greenplane]

Hi there i have a full set almost new
Could post them out today total including trackable postage £10
Thanks
Mike

[wildoliver]

Hi Mike its a deal! Do you only have one set or could you scrape a second together?

Is it possible to have a picture of them just to make sure they are the right ones?

Many thanks

Oliver