View Full Version : 22 4.0
daz75
24-01-2017, 02:35 PM
So eveyone is now doing 2 car types dirt and carpet apart from tlr so when do we reckon they will jump on the band wagon?
cutting42
24-01-2017, 04:29 PM
They already do really. You can only buy a dirt version and have to buy a laydown conversion to get a carpet car.
daz75
24-01-2017, 05:37 PM
They already do really. You can only buy a dirt version and have to buy a laydown conversion to get a carpet car.
Yes but even that has now changed to a dirt laydown
I mean 2 separate cars
/tobys
24-01-2017, 05:43 PM
There are still the carpet laydown and the dirt laydown gearbox options (with the former being optimised for lower ride heights via the HRC front end mod and the special alloy rear hubs, the latter being run with the "kit" front end and rear hubs).
IMO the logical trend would be to try and create a modular chassis with easy to fit and inexpensive options to optimise for a variety of conditions rather than tailoring for specific track types and conditions. I think that this is broadly what Schumacher are trying to achieve with their new 2wd platform...
daz75
24-01-2017, 06:05 PM
There are still the carpet laydown and the dirt laydown gearbox options (with the former being optimised for lower ride heights via the HRC front end mod and the special alloy rear hubs, the latter being run with the "kit" front end and rear hubs).
IMO the logical trend would be to try and create a modular chassis with easy to fit and inexpensive options to optimise for a variety of conditions rather than tailoring for specific track types and conditions. I think that this is broadly what Schumacher are trying to achieve with their new 2wd platform...
The first release of the laydown conversion is being discontinued though so unless you already have it your screwed
/tobys
24-01-2017, 06:14 PM
yeah its a shame for some folks, especially those that just run on carpet or indoor astro; I think their (TLR) reasoning is that that the dirt laydown conversion covers a wider range of track conditions than the original laydown (which is very challenging in anything but high grip conditions).
So its probably a good move overall by TLR. I've not seen the cost of the new conversion but I don't think you get the alloy rear hubs so if its the same price, its a poorer deal for the racer.
I would like to get a Dirt Laydown gearbox but they a) never seem to be in stock and b) are so expensive (similar cost to the Exotek alloy gearbox I think).
daz75
24-01-2017, 07:26 PM
yeah its a shame for some folks, especially those that just run on carpet or indoor astro; I think their (TLR) reasoning is that that the dirt laydown conversion covers a wider range of track conditions than the original laydown (which is very challenging in anything but high grip conditions).
So its probably a good move overall by TLR. I've not seen the cost of the new conversion but I don't think you get the alloy rear hubs so if its the same price, its a poorer deal for the racer.
I would like to get a Dirt Laydown gearbox but they a) never seem to be in stock and b) are so expensive (similar cost to the Exotek alloy gearbox I think).
Yeah think they are the same price but with no alloy bit of a xxxx take
Allan1875
24-01-2017, 08:17 PM
Most of the TLR team are running the dirt laydown on high grip.
/tobys
24-01-2017, 09:47 PM
Most of the TLR team are running the dirt laydown on high grip.
@Allan - the UK or US TLR team? I've seen the US guys seem to run it all the time but wasn't sure about over here...
Darren Boyle
25-01-2017, 01:10 AM
I would like to get a Dirt Laydown gearbox but they a) never seem to be in stock and b) are so expensive (similar cost to the Exotek alloy gearbox I think).
TLR Dirt laydown gearbox conversion is £149.99, the Exotek alloy laydown gearbox is just £84.95, not really too similar.....
/tobys
25-01-2017, 09:21 AM
I was referring to the dirt laydown gearbox itself, not the entire conversion, think it retails for about £60? So it would be about £20 or so difference (%age wise, a not insignificant difference but in monetary terms, not much difference). In the US, the difference is even less, around $10.
My point being that with the Exotek being all alloy construction, it seems good value in comparison but I don't know really how the Exotek compares in terms of positioning vs TLR Carpet Laydown and Dirt Laydown gearboxes.
Maybe you could offer some insight Darren?
Darren Boyle
25-01-2017, 10:38 AM
If you are just comparing the gearbox cases, the Exotek also includes the motor plate, gear cover and carbon battery strap in that price too.. making it even better value.
/tobys
25-01-2017, 10:45 AM
Thanks Darren, it's more the on track performance I'm interested in - particular the Exotek vs TLR dirt laydown. Which, in your experience or opinion, performs the best in lower grip conditions?
Cheers.
Allan1875
25-01-2017, 02:24 PM
@Allan - the UK or US TLR team? I've seen the US guys seem to run it all the time but wasn't sure about over here...
Both teams. Ellis and Chris have been using dirt laydown on astroturf for quite a while.
daz75
25-01-2017, 02:52 PM
Both teams. Ellis and Chris have been using dirt laydown on astroturf for quite a while.
Any ideas why?
Allan1875
25-01-2017, 03:17 PM
Any ideas why?
They just prefer the way it handles. I've not tried it myself yet so difficult to comment.
Darren Boyle
25-01-2017, 11:27 PM
Thanks Darren, it's more the on track performance I'm interested in - particular the Exotek vs TLR dirt laydown. Which, in your experience or opinion, performs the best in lower grip conditions?
Cheers.
No-one outside of the team has tried the dirt laydown yet and since the team drivers are also barred from using the Exotek version leaves no-one in the UK having tried both yet....
/tobys
26-01-2017, 06:51 AM
@Darren - Ahh ok, thanks for clarifying - much appreciated.
daz75
26-01-2017, 03:51 PM
One way to screw over your resellers is to do things like this
http://www.tlracing.com/Products/Default.aspx?ProdID=TLR231064
Sounds like people will be holding off buying 22 3.0 if it's due April
whats due April I must be missing something on the TLR website?
daz75
29-01-2017, 04:00 PM
whats due April I must be missing something on the TLR website?
It got pull said it was a 22 4.0 chassis
discostu
29-01-2017, 10:57 PM
Any ideas why?
Both Ellis and Chris are using a different car to what is available aswell and have been for a couple of weeks
Allan1875
30-01-2017, 09:53 AM
Both Ellis and Chris are using a different car to what is available aswell and have been for a couple of weeks
Different in what way?
daz75
30-01-2017, 10:11 AM
Different in what way?
In a 22 4.0 way :D
discostu
30-01-2017, 05:42 PM
Different in what way?
It's not for me to say if TLR are anything to go buy you'll see it some time never 👍👍👍
daz75
02-02-2017, 09:34 PM
Got to be coming or why would the stop selling something they've only just brought out
http://www.rctech.net/forum/attachments/electric-off-road/1409882d1486070895-official-tlr-22-3-0-race-kit-thread-laydown_discontinued.jpg
http://www.horizonhobby.co.uk/autoonline/j29_tlr/j29_kits/tlr03013/tlr-22-4.html (http://www.tlracing.com/Products/Default.aspx?ProdId=TLR03013)
http://www.horizonhobby.co.uk/autoonline/j29_tlr/j29_kits/tlr03013/art/tlr-22-4-black.jpg
daz75
02-03-2017, 05:29 PM
Not really a shock
Annoying tho
As I sold my 3.0 a while ago instead of investing in one of the rather expensive laydown gearbox options and currently do not have a 2WD buggy, I cannot say that I am annoyed by TLR's announcement of the 4.0, which will likely not hit the shelves before May. Had they decided to give the 22T 3.0 the treatment they gave to the buggy, I most probably would not have gone for the Xray as quite a few of my racing buddies drive a fleet of TLR cars and trucks. If I had bought the 3.0 and put in one of those pricey gearboxes only recently, I would be annoyed for sure, though.
Other than that, TLR did a great job by addressing virtually everything I disliked on the 3.0. With the addition of the gear diff in th kit, they would have scored a 10/10 in my book. I had already thrown an eye on the Cougar KC, but now I seem to be crosseyed! :p
stefke
03-03-2017, 11:44 AM
4.0 = 3.0 as it should have been from the start :(
daz75
03-03-2017, 12:30 PM
Wonder how easy it is to swap from stand up to laydown
Wonder how easy it is to swap from stand up to laydown
As long as your wires are long enough, this should basically not be a big issue. Of course, completing both gearboxes with internals and shock towers with shock mounts will speed things up quite a bit. I used to switch between the standard and the original lowrider gearbox on my B5M relatively often before deciding that the B5MLR did not work for me on outdoor tracks.
4.0 = 3.0 as it should have been from the start :(
For us astro and carpet racers yes, but I can see the 3.0's usefulness for the substantially larger US medium grip clay community and the track conditions the TLR designers experienced when they developed the 3.0.
It is still a great car in lower grip conditions, as is my son's VBC Racing Firebolt that gathers dust in our cellar. I was surprised at how good that buggy was a really loose and bumpy dirt track. Times change, though, and some companies are faster to adopt than others.
GRIFF55
03-03-2017, 04:06 PM
nice looking car.
daz75
03-03-2017, 04:48 PM
Being an old school racer and driving a xx that my dad made little changes too does all stuff he's talking about in the video actually make any difference or is all just bs
If you want to race competitvely, reduce your lap times and know how to find a good set-up for the surface you are running on, all these features will bring you a great step or even leap forward. Even if the car should not feel any faster at first, lap times don't lie. If you switch from an old-school XX to a mid motor car and run on a track with a decent amount on grip, you'll notice the difference instantly. Switching from a B5M to a YZ-2 for me was almost as big an improvement as converting my 1st gen B-Max2 to the MR version.
To sum things up: Properly designed laydown cars are a noticable improvement over std mid-motor cars, and all the features of the 4.0 improve adjustability and address the few design shortcomings the 3.0 used to have. I doubt that you'd be disappointed if you'd give the 4.0 (or any other big manufacturer's current 2WD) a try. Also, the current breed of cars is much more durable than anything before the original TLR 22, so it would be kind of you to send your classic XX into its well deserved retirement. ;)
Really like the look of this - mainly because I use to race Losi all the time back in the day and fancy some nostalgia :) anyone know if a gear diff is available before I put a deposit down?
daz75
03-03-2017, 05:36 PM
If you want to race competitvely, reduce your lap times and know how to find a good set-up for the surface you are running on, all these features will bring you a great step or even leap forward. Even if the car should not feel any faster at first, lap times don't lie. If you switch from an old-school XX to a mid motor car and run on a track with a decent amount on grip, you'll notice the difference instantly. Switching from a B5M to a YZ-2 for me was almost as big an improvement as converting my 1st gen B-Max2 to the MR version.
To sum things up: Properly designed laydown cars are a noticable improvement over std mid-motor cars, and all the features of the 4.0 improve adjustability and address the few design shortcomings the 3.0 used to have. I doubt that you'd be disappointed if you'd give the 4.0 (or any other big manufacturer's current 2WD) a try. Also, the current breed of cars is much more durable than anything before the original TLR 22, so it would be kind of you to send your classic XX into its well deserved retirement. ;)
I bought a 22 3.0 not that long ago and while of course it faster than my old xx (not by as much as you thibk) I'm wondering if I'd really notice any difference between a 3.0 and 4.0 I suspect not
daz75
03-03-2017, 05:37 PM
Really like the look of this - mainly because I use to race Losi all the time back in the day and fancy some nostalgia :) anyone know if a gear diff is available before I put a deposit down?
There was some take a specific gear diff for the 22 3.0 in another thread so not sure if that would fit here too
I bought a 22 3.0 not that long ago and while of course it faster than my old xx (not by as much as you thibk) I'm wondering if I'd really notice any difference between a 3.0 and 4.0 I suspect not
On high-grip with a gear diff and once you adjusted your driving style I bet you will. You'll carry much more corner speed if you dare going through corners as fast as the car is capable. Some of it will come naturally from the car, the other part is up to the driver. My TLR driving buddies were happy when they switched from the 2.0 to the 3.0, but I could still hold the faster ones at bay with my YZ-2. There were approx. 0.8 sec between the hot laps of my 3-gear YZ-2 and my 3.0 on a tight indoor track (Racing Arena Limburg), and my experience was the same on astroturf. When my buddies switched to the delrin laydown gearbox, things were as before I had the laydown advantage, i.e. the faster guys were faster than me again. Other more talented and younger drivers experienced similar things with their Kyoshos when switching from the RB6 to the RB6.6, i.e. returning to the front of the fast pack from just trying to hang on.
That being said, the 3.0 will still be a good car when the 4.0 is released and more than capable in the right hands, just not as fast on a high-grip track. If there is lots of sand on your track or it does not dry up, the 4.0 with a stand-up gearbox may or may not be faster, but more adjustable. With a stand-up gearbox, cars in my experience accelerate better than laydown cars, but are considerably slower through the corners.
Like it or not, today it is about having the right car and the right set-up for the right track, much more so than when we still used to run Holeshots on virtually every circuit on the continent.
There was some take a specific gear diff for the 22 3.0 in another thread so not sure if that would fit here too
The aluminium planetary gear diff should be out any day, part no TLR332067.
/tobys
03-03-2017, 06:27 PM
Really like the look of this - mainly because I use to race Losi all the time back in the day and fancy some nostalgia :) anyone know if a gear diff is available before I put a deposit down?
https://www.rccarshop.co.uk/spares/tlr332067-tlr-complete-2wd-gear-diff-aluminium-gear-all-22-p
daz75
03-03-2017, 07:16 PM
Thanks for the insights mes not used the laydown on my 3.0 yet want to see what the 4 gear is like before I swap it
daz75
03-03-2017, 07:17 PM
https://www.rccarshop.co.uk/spares/tlr332067-tlr-complete-2wd-gear-diff-aluminium-gear-all-22-p
Holy cow £66 :thumbdown:
Holy cow £66 :thumbdown:
Not a bargain for sure, but I guess machined alminium comes at a price. The Losi RTR gear diff LOSA2954 has been notorious for leaking, but can be improved with other O-rings. The Serpent gear diff is said to be a direct fit and to be a quality item, but also not really cheap and in its early days also had leaking issues. Maybe you can get your hands on a used non-leaking Serpent diff when other TLR drivers switch to the new aluminium one.
Thanks for the insights mes not used the laydown on my 3.0 yet want to see what the 4 gear is like before I swap it
You're welcome! With a 4-gear gearbox your buggy will shift more weight to the rear when accelerating and to the front when breaking. This is great for increasing forward bite on a slippery track, but not so good when you want to slow down just before entering a sharp turn. Once I switched to 3-gear gearboxes on my YZ-2 and T5M, I did not look back, neither in the dry nor in the wet.
daz75
09-03-2017, 05:42 PM
Not much excitement for this then?
If you are running on a slippery track regularly and/or prefer to let your car roll rather than brake hard before entering a turn, you might actually like the 4-gear, but if you are looking for more on-power steering and corner speed, I doubt it will help you.
If you are looking for corner speed an are a die-hard TLR/Losi fan, I'd say wait for the 4.0 and don't put too much money into the 3.0 any more. Other than that you could be happy with YZ-2 CA, Schumacher KC or the like right now. I really found test drives helpful in the past, in fact a test ride made me buy the YZ-2 when I was set not to buy a new kit for another half year or so back in the day... :D
Some of Horizon Germany's team drivers got their 4.0 kits already and I was lucky to grab the transmitter of one of them today a couple of times and tinker a littlw with the car in the pits. Apart from the springs and gear diff, the 22 initially was box stock. After some adjustments and adding the servo weight and 20 g of sticky weights behind the motor, the car was really great to drive, easy and fast. When the time is ripe for another 2WD, this kit is definitely on my shortlist! :thumbsup:
Cosworth
29-04-2017, 07:16 PM
Built one today for a friend who wanted it done but didn't have the time.
My first time building a Losi kit. Goes together nice and looks a good piece of kit. Diff slightly notchy but hopefully that will go after a few runs. Happy days.
Jimmy Whitehall
04-05-2017, 10:14 AM
A notchy diff from a 4.0 kit could be due to the bearing not seating correctly on the out-drive.
It seems like there was a bad batch of out-drives as I have heard of multiple people having the same issue...
tyreman
04-05-2017, 03:43 PM
It's down to initially overtightning if you run it in the notchyness will go, nothing wrong with the outdrives.
I've read on rctech that there was a bad batch of outdrives and they are sorting them out at the mo.
Received, built and raced my 22 4.0 over the past weekend.
Thanks to DMS Racing for the super quick shipping.
Seemed to be a pretty straight forward build with no headaches along the way. Worth tapping some of the stiffezel parts with a smidge of black grease, especially the rear wishbones and side pods. Also worth double checking the instructions and whats in the box as there are quite a few tuning parts included in the kit to adjust, trail, toe, kick angle, anti-squat and roll center so it's worth pulling out the parts that suit the track or your driving style from the get go.
During the build I swapped out some of the kit items to improve reliability, strength, reduce weight and well just because they look nicer than the stock part (in my opinion);
JConcepts Fin Titanium Turnbuckles, Mono wheels and 6.5" rear wing,
Exotek allow front camber block,
Avid shock springs and pistons,
RDRP caged thrust race and diff balls
For power I installed a Vampire SR1+ ESC and AB+ V2 7.0 motor and 4600mah 80c shorty pack while a Corally CV-4008 is installed for fast precise steering.
Compared to my previous 22 2.0 the 22 4.0 instantly felt more nimble when it came to direction changes, while there was also plenty of forwards traction on the grass despite using the laydown gearbox.
Does anyone know if the UK team set-up's are uploaded anywhere now-a-days and if so where as I'd be interested to see what is being used where.
daz75
07-06-2017, 09:50 PM
Good to see someone post about the new car is there not a big uptake? Front tow looks a bit excessive 😁
Good to see someone post about the new car is there not a big uptake? Front tow looks a bit excessive 😁
I was kind of hoping it might encourage a little more action on the thread.
It's running a degree of toe out, but the photo makes it look like there is much more.
magictorch
10-06-2017, 09:51 AM
Just got one, built but not ready for the track yet.
Nice build, infinitely adjustable so plenty for the tinkers to play with, my first proper 2wd since the durango 210
As soon as I have a couple of race days under my belt I will be able to comment on performance but if its anything like my friends 3.0 with laydown it should be very competitive.
Did you set it up as per the manual carpet/astro set up sheet?
/tobys
10-06-2017, 11:55 AM
thought i'd share some pics...
still getting to grips with the setup on mine, not running as well as my 3.0 LD yet - build was good though and the gearbox and shock tower changes are a big step forward.
Just got one, built but not ready for the track yet.
Nice build, infinitely adjustable so plenty for the tinkers to play with, my first proper 2wd since the durango 210
As soon as I have a couple of race days under my belt I will be able to comment on performance but if its anything like my friends 3.0 with laydown it should be very competitive.
Did you set it up as per the manual carpet/astro set up sheet?
I went LRC, shocks forward and lay down gearbox withb standard height diff as my first meeting was on grass.
If I were running on astro I would have automatically raised the diff, +3.5mm rear hubs, hrc front block and shocks forward.
I'll try and post a setup sheet this evening.
brooksy
04-07-2017, 06:04 PM
Anybody got any updates on the new 4.0 as regards to performance and how it handles straight from the box?. I'm running an xb2 at the mo but after seeing Toby's(/tobys) at West Bridgford on Sunday I'm seriously looking at changing to one. I've not had a losi for many years and never really liked the look of the 2.0/3.0 but this one could sway me.
Phill
tyreman
04-07-2017, 07:00 PM
The only options I would buy straight away is the weight kit TLR331028 and the front roll bar TLR334039 everything else is in the box.
The gear diff is a good tuning option but not essential straight away.
Also we are running AE springs as well.
NeilRalph77
04-07-2017, 07:16 PM
I love mine every bit as much as the 3.0, definitely a progression of something that was already very good, my initial thoughts straight from the box were jesus it's got some steering, but it's awesome now I've dialled some out. I can't think of another car I'd rather be driving!
brooksy
04-07-2017, 07:24 PM
The only options I would buy straight away is the weight kit TLR331028 and the front roll bar TLR334039 everything else is in the box.
The gear diff is a good tuning option but not essential straight away.
Also we are running AE springs as well.
Good to know the AE springs fit as I have a full set. I'm liking the fact you also have two gearbox options for high and low grip tracks. The XB2ce is no good on grass or low grip at all. Really struggling with it even though I've made lots of changes to it.
The 4.0 seems to be really good with the lay down box on grass,the one I saw was handling the grass(or lack of it)pretty good.
brooksy
04-07-2017, 07:32 PM
I love mine every bit as much as the 3.0, definitely a progression of something that was already very good, my initial thoughts straight from the box were jesus it's got some steering, but it's awesome now I've dialled some out. I can't think of another car I'd rather be driving!
Only thing at the mo is not many people are posting up on here with setups,so I'd be starting from scratch,is there a fb page for TLR here in England. Good to know the cars an improvement on the 3.0.
tyreman
04-07-2017, 07:38 PM
Only thing at the mo is not many people are posting up on here with setups,so I'd be starting from scratch,is there a fb page for TLR here in England. Good to know the cars an improvement on the 3.0.
Setups that the UK team can be provided, they get posted on the TLR forum, not sure if everyone can see them though..
tyreman
04-07-2017, 07:43 PM
double post
Gnarly Old Dog
04-07-2017, 07:47 PM
What AE springs would you suggest having Brian and in what conditions do you run the high/low diff option?
Cheers
tyreman
04-07-2017, 08:07 PM
What AE springs would you suggest having Brian and in what conditions do you run the high/low diff option?
Cheers
For the most part I have been running AE blue on the front and AE green on the rear, up until this past weekend at Oswestry when I ran the diff at 0 height and std hubs with shocks on the rear and AE black spring ( dry buy very loose due to sand coming through astro) I have run the car at +3.5 diff height and on the hubs as well.
tyreman
04-07-2017, 08:09 PM
This is the base setup we are now using and tweak it for each track.
http://screwz4rc.co.uk/wp-content/uploads/2017/07/22-4.0-Setup-june-17.pdf
tyreman
04-07-2017, 08:12 PM
This is what I used in dry low grip conditions.
Note ball diff was used.
http://screwz4rc.co.uk/wp-content/uploads/2017/07/22-4.0-Setup-Sheet-Oswesrty-low-grip.pdf
daz75
04-07-2017, 08:32 PM
No pics showing tyreman
tyreman
05-07-2017, 07:53 AM
http://screwz4rc.co.uk/wp-content/uploads/2017/07/22-4.0-Setup-Sheet-Oswesrty-low-grip.pdf
tyreman
05-07-2017, 05:28 PM
Hopefully you can see these ones.
http://screwz4rc.co.uk/wp-content/uploads/2017/07/fullsizeoutput_287.jpeg
NeilRalph77
05-07-2017, 07:05 PM
Yeh that's pretty much where I'm at aswell.
brooksy
06-07-2017, 05:25 PM
Setups that the UK team can be provided, they get posted on the TLR forum, not sure if everyone can see them though..
Cheers for that,I'll take a look.
brooksy
09-08-2017, 07:52 PM
Well,I've taken the plunge and bought one. Should be here tomorrow. Looking forward to getting it up and running. Not had a losi since the xx days.
Well,I've taken the plunge and bought one. Should be here tomorrow. Looking forward to getting it up and running. Not had a losi since the xx days.
It's a nice build, worth using a little grease on some of the screws as the stiffezel is, well pretty stiff and changing the diff height once built isn't a two minute job but other than that I found it an enjoyable build.
Found its been working well on grass and low/high grip astro tracks with minimal changes.
Prefer the feel of Avid springs over the TLR ones, it's difficult to explain but they just feel less harsh on track and have put some weight under the servo comparable with the TLR weight kit and that's about it.
/tobys
11-08-2017, 06:48 AM
Hi mate
if you are at the Bingham regional next week, pop over for a chat about the car, things we've learnt so far etc. My personal recommendation would be to build with lay down, high diff, for starters - you then have a gearbox option either side of it.
Cheers
Toby
brooksy
11-08-2017, 11:37 AM
It's a nice build, worth using a little grease on some of the screws as the stiffezel is, well pretty stiff and changing the diff height once built isn't a two minute job but other than that I found it an enjoyable build.
Found its been working well on grass and low/high grip astro tracks with minimal changes.
Prefer the feel of Avid springs over the TLR ones, it's difficult to explain but they just feel less harsh on track and have put some weight under the servo comparable with the TLR weight kit and that's about it.
Cheered for the info. I'm sure I'll be on here more often asking questions. Hopefully I'll start the build tonight/tomorrow.
brooksy
11-08-2017, 11:41 AM
Hi mate
if you are at the Bingham regional next week, pop over for a chat about the car, things we've learnt so far etc. My personal recommendation would be to build with lay down, high diff, for starters - you then have a gearbox option either side of it.
Cheers
Toby
Hi Toby,I'll be there. I was going to put the lay down on as I'll be running it indoors at West Bridgford during the winter on carpet. It'll be good to get some info of you as regards the gearbox height for different surfaces.
I've seen the TLR video on YouTube that explains what everything does but I'll need to watch it a few more times🤔
brooksy
12-08-2017, 01:42 PM
Well,car is nearly there,just the electrics to do. Nice build but the plastics are very hard to screw in to. Not complaining though😂
brooksy
13-08-2017, 12:11 AM
Finished the build with electrics. Question For you though,I can't get the rear ride height down any lower than 19mm. The spring collar is all the way to the top and the shocks are in the middle on both top and bottom. Has anybody else had this problem and if so how/have you resolved it?.
Phill
Finished the build with electrics. Question For you though,I can't get the rear ride height down any lower than 19mm. The spring collar is all the way to the top and the shocks are in the middle on both top and bottom. Has anybody else had this problem and if so how/have you resolved it?.
Phill
I use Avid springs on mine and can get down to around 15-16mm on Schumacher Mini Spikes and a little lower on Darts.
I have also heard that some racers are using the Associated B6 lowering spring cups, or similar.
brooksy
16-08-2017, 11:24 PM
I use Avid springs on mine and can get down to around 15-16mm on Schumacher Mini Spikes and a little lower on Darts.
I have also heard that some racers are using the Associated B6 lowering spring cups, or similar.
I've put ae springs on,they're slightly shorter and got it down to 18mm but would like to have the option to lower it further,especially on carpet.
I'll have to give it a run at that,It's the height I usually set my cars to for Astro.:thumbsup:
tyreman
17-08-2017, 10:35 AM
I've put ae springs on,they're slightly shorter and got it down to 18mm but would like to have the option to lower it further,especially on carpet.
I'll have to give it a run at that,It's the height I usually set my cars to for Astro.:thumbsup:
I ran mine at Silverstone on eos carpet on Tuesday and started with 15mm ride height but it was too low when landing off the jumps, so I raised it to 17mm there was no difference in handling and it was fine over the jumps.
Big E
17-08-2017, 03:28 PM
If you want to get them lower just cut 2mm off the shock bottom ball joint.
E
brooksy
17-08-2017, 03:40 PM
If you want to get them lower just cut 2mm off the shock bottom ball joint.
E
Cheers Ellis,completely forgot about that idea.
TRFfan
18-08-2017, 11:04 AM
cut 2mm off the shock bottom ball joint is a option, also the short yokomo springs will do the trick
:)
Yokomo B-MAX2/B-MAX4III Big Bore Shock Front Spring Astroturf or Carpet Surface
brooksy
18-08-2017, 12:41 PM
cut 2mm off the shock bottom ball joint is a option, also the short yokomo springs will do the trick
:)
Yokomo B-MAX2/B-MAX4III Big Bore Shock Front Spring Astroturf or Carpet Surface
Gone with Ellis' idea...it's cheaper:thumbsup:
Origineelreclamebord
18-08-2017, 01:06 PM
The ride height was already a problem with the TLR 22 3.0. When Wesley van Helmond still drove for TLR I made these low-offset spring cups for him:
https://www.shapeways.com/product/A3HE5GXGD/0042-tlr22-3-0-low-offset-spring-cup-set?optionId=59440146
https://images1.sw-cdn.net/product/picture/710x528_13695422_8426392_1459359823.jpg
There might also still be a pair of these in our old stock (to save on postage), so if you're interested just PM me :)
brooksy
18-08-2017, 04:45 PM
It's finished and ready to roll👊🏻
brooksy
20-08-2017, 07:02 PM
Had a quick run with the car today after a Mid East 4wd meet at BMR.
There were a few top guys still running around with their cars after the A final so I thought it would be good to have a run with them. I was really impressed with how stable the car was over bumps as the track is bumpy down the straight but has very high grip Astro on it. It was quick over jumps and landed really well so on first impressions I'm really pleased with it.
Had a few tips off Toby for some setup changes but I'm more than happy.
brooksy
03-09-2017, 06:26 PM
First run out with the car today,very good out of the box I have to say. After a few tweeks and speedo setup change car was on point. Very consistant laps and quick too. I managed a couple of third in rounds behind two very quick guys so more than happy with it.
I'll have a better idea of how it goes in a couple of weeks when I run the last outdoor meeting. A lot of the lads from my regional will be there.
brooksy
17-09-2017, 07:00 PM
Well,last outdoor meeting of the year has come and gone. Managed to Q5 in the B at RHR today.
Car was faultless as I managed to get to the front and take the win. Well happy with the car,now for indoors on EOS carpet.
brooksy
12-10-2017, 12:53 PM
Another(few)questions for you🤔
Has anybody had the need or tried the stand up gearbox on the 4.0?. If so,what surfaces and grip levels did you try it on and how did it go?.
I may run it at the next Worksop if spaces are available,so just testing the water for setups.
tyreman
12-10-2017, 03:18 PM
It was tried by one of the team last year and he scraped the A final, when he ran the laydown car he was comfortably in.
brooksy
16-10-2017, 08:50 AM
Cheers for that. I’ll try it in practice if I get in. If I feel it’s not fast enough I’ll drop the lay down on.
Next question is about the servo.
I’ve got a low profile savox in at the moment,I’ve tried fitting a full size savox in and it’s catching on the steering arm. Does anybody run a full size servo and what make is it?.
NeilRalph77
16-10-2017, 11:17 AM
My full size fits and works fine, where's your catching? And are you using any servo spacers? Manual says 0 and that's fine on both mine.
brooksy
16-10-2017, 01:32 PM
No spacers fitted and it still doesn’t fit. I don’t know if you can see from the picture but the full size savox is higher than the low profile where the arm fits. I think it’s that stopping it fitting. Might have to buy a different make of servo.
NeilRalph77
16-10-2017, 02:45 PM
Mine with a 1258.
/tobys
16-10-2017, 05:36 PM
Xpert full size servos fit fine. And of course, Spektrum do too!
brooksy
16-10-2017, 08:07 PM
Mine with a 1258.
I must have done something wrong with my steering then. I’ll have to take it apart this week and have a look. I tried fitting it twice this last week and couldn’t fathom why it wouldn’t go. Cheers for the pic Neil.
RandomConflict
17-10-2017, 06:39 AM
Is the issue you’re having when the top of the servo horn/steering link hitting the underneath of the front bulkhead? If so, mine caught a little, but removed some material from the bulkhead and now it’s fine. You could also use some servo spacers to bring the servo forwards slightly, and this should give more clearance
brooksy
17-10-2017, 01:14 PM
No,that’s not the problem. As you can see from the pic,their is plenty of clearance between the servo horn and steering rack with the low profile servo,but when I try to put the full size in it won’t go because of how close it is.
AfroP
17-10-2017, 03:06 PM
maybe not shimming it correctly when mounting the servo to the servo mounts?
part number TLR231027
on page 11 or 12 of the manual.
or try a different size shim to see if you can get it right
brooksy
17-10-2017, 03:45 PM
no shims on it🤔.
brooksy
17-10-2017, 04:02 PM
This is how close it is to the steering rack without the horn on😳. I notice some of you guys are using the ally parts where the servos screws on. Could that be the difference????
NeilRalph77
17-10-2017, 05:11 PM
Have you tried with the horn on? it looks closer in these pics than it actually is, probably got over 1mm clearance with the plastic parts and maybe 0.5 with the ali she looks snug but it doesn't touch through any part of the steering range, its where the horn sits vertical where its the closest. Maybe it's having the bell cranks flipped that's causing the issue? I've never flipped mine so I couldn't comment on that.
NeilRalph77
17-10-2017, 05:13 PM
How dirty is that car???? I'm ashamed!!!!
tyreman
17-10-2017, 05:26 PM
It looks like the mounting lugs on the servo are further back on the black edition just look at how much further forward the back of your servo is, it should be inline with the back of the part of the servo mount, some of the early Spektrum ones were like this.
tyreman
17-10-2017, 05:27 PM
One way to rectify this rather than replace your servo is to get the alloy servo mounts so you can mount the servo on the back of the mounts.
Not done this myself but would be cheaper than buying another servo.
brooksy
17-10-2017, 07:51 PM
Looking at Neil’s car it should go. The servo He has doesn’t look any different to my Black Edition. Maybe the fact that I’ve flipped the bell cranks is a factor. I’m at work now so I’ll give it a go tomorrow when I’m up. I’ll try it as the steering is now and in its standard position and report back. Cheers for the replies lads,much appreciated.
brooksy
18-10-2017, 01:44 PM
I’ve had a look at it today and had to put the steering back to the original kit set up. The servo horn was totally locking up against the steering rack with it the other way. This is a pic of it. JUST enough clearance!.
brooksy
21-10-2017, 07:10 PM
Third time on the carpet with the car today at West Bridgford and it was flying. I put 3000wt in the diff and it was spot on. Some top drivers there and I would have been happy with a B final. Managed to get it in the A at the back and ended up 8th.
Next question
Has anybody got any suggestions about set up for Worksop,medium grip sports hall,cork like running surface?
Tyreman,your setup seems to have disappeared off here for low grip???
Has anybody got any suggestions about set up for Worksop,medium grip sports hall,cork like running surface?
Tyreman,your setup seems to have disappeared off here for low grip???
There is a good selection of setups here - http://site.petitrc.com/setup/losi/SetupSheetLosi224.0/
You could try my Boughton setup as that is pretty low grip astro, or Brian's Oswestry setup is also listed.
brooksy
23-10-2017, 12:16 AM
There is a good selection of setups here - http://site.petitrc.com/setup/losi/SetupSheetLosi224.0/
You could try my Boughton setup as that is pretty low grip astro, or Brian's Oswestry setup is also listed.
Cheers for that,I’ll check them out.
brooksy
05-11-2017, 09:50 PM
Ran the 22 4.0 today at Worksop and it was mint, managed to qualify B8. Every round I got more confident to push it and got faster and faster. The final went even better...until the last two laps!. I got up to 2nd but had too many mistakes on the last two laps which took me down to 4th in the end. This car does not disappoint.
dibble34
06-11-2017, 08:30 PM
Third time on the carpet with the car today at West Bridgford and it was flying. I put 3000wt in the diff and it was spot on. Some top drivers there and I would have been happy with a B final. Managed to get it in the A at the back and ended up 8th.
Next question
Has anybody got any suggestions about set up for Worksop,medium grip sports hall,cork like running surface?
Tyreman,your setup seems to have disappeared off here for low grip???
Hi, can I ask what shock oils you were running?
brooksy
06-11-2017, 11:03 PM
Hi, can I ask what shock oils you were running?
I’m afraid I’m old school,I ran 35wt in the front and 30wt in rear.
Phill
magictorch
08-11-2017, 10:11 AM
Hi, just ordered a gear diff for my 4.0
What do you guys recommend as a good starting point for oil?
Running on carpet med/high grip generally tight technical tracks with bare wood ramps and a little exposed sports hall floor.
Any recommendations will be greatly appreciated as its not a 2 minute job to swap out.
Cheers
/tobys
08-11-2017, 10:22 AM
3000wt is a good starting point for carpet.
brooksy
08-11-2017, 02:47 PM
As Toby says,3000wt is good. I was surprised when I put it in as its seemed really thin when turning the diff in the car but it was fine on high grip EOS carpet.
magictorch
08-11-2017, 05:56 PM
cheers guys.
thanks for the advice:thumbsup:
dibble34
08-11-2017, 07:47 PM
For what it’s worth I was on eos carpet at the weekend with 15k in the diff and the car would not rotate enough. I defo plan to try 3k next time.
RandomConflict
09-11-2017, 09:19 AM
3K is a good starting point. Was running that for quite a while, but found when front tyres were new, the car would over rotate a little to much. Have now gone upto 7K both indoors and out, and the back end just feels a little more stable for me, can push the throttle harder on exit without the fear of it letting go. I also found 7K to be a bit safer outdoors on Astro at Coventry Model Car Club once the sand had come up slightly. If I wanted a touch more steering, I’d drop down to 5K
dibble34
09-11-2017, 12:24 PM
3K is a good starting point. Was running that for quite a while, but found when front tyres were new, the car would over rotate a little to much. Have now gone upto 7K both indoors and out, and the back end just feels a little more stable for me, can push the throttle harder on exit without the fear of it letting go. I also found 7K to be a bit safer outdoors on Astro at Coventry Model Car Club once the sand had come up slightly. If I wanted a touch more steering, I’d drop down to 5K
Ah that is interesting, I might try 7k first then. Thanks for the info :)
Doovde
11-11-2017, 09:01 AM
Does anyone know if the rear camber block for the 4.0 will fit the 3.0 or if there is an aftermarket alternative other than the schelle?
tyreman
11-11-2017, 06:16 PM
Yes the new camber block will fit the old car.
magictorch
12-11-2017, 04:55 PM
Quick update
I ran the car on friday night with 5k oil in the gear diff.
Car felt great, similar to the ball diff but with more drive out of the corners, pushed a little more but super safe.
I will try 3k out of curiosity
dibble34
19-11-2017, 07:00 PM
I tried 5k and defo better rotation than 15k. I had a lot of rear inside wheel lifting on a tight carpet track, but was the only one running a 22 4.0. I laid the front shocks down and that helped. Anyone else seen this? Wondered what other changes I could have tried.
RandomConflict
19-11-2017, 11:11 PM
Possibly stiffer rear shocks and a roll bar. On EOS carpet I’m running 30wt oil and AE Blue springs on the back (2.3 lbs), and the thickest roll bar. It was the roll bar which made the biggest difference though! I then could stand the shocks up on the front to gain steering through the corner
dibble34
20-11-2017, 08:15 AM
Thanks, that was the only thing I didn’t try! Changed front shock springs, front roll bar etc. I shall try that for next time :)
Pistol123
18-01-2018, 01:41 PM
Hi there, I switch to a TLR 22 4.0 last June when the kits arrived in the UK. I have been registered on here for a while but until now never been able to get my account activated. Great to finally be on access this site and post.
I race at Colchester (grass track) and Coastal (bumpy astro) and am slowly getting my car set up with the help from Ellis Stafford (big E), George (No.46) and John Brown (jcb)and looking to up my game and experience this year and enter a few EOE Regional rounds.
Very pleased with the TLR so far, although the last 6 months have very much been a learning curve - well pestering George :thumbsup:.
Mark Boos
25-01-2018, 11:05 AM
So are there any carpet speedsecrets/ setups from BigE and the others?
So far I'm one of a few TLR drivers here in Germany and unfortunately there is not a lot info.
I realy love the car so far. I'm running the manual carpet setup minus the sway bars, flipped the bell cranks and Run Yokomo Racing Performer springs black in Front and orange in the rear.
Had two 3rd, a 5th and a 6th place so far out of about 20 starters in the 13.5 blinky class.
brooksy
04-02-2018, 04:04 PM
Ellis is running Carisma now. I run mine kit set up for carpet with 3000wt in the gear gift and it’s spot on. I’m usually in or around the top 10 of about 50 drivers and that’s in Mod.
mark-rc
12-02-2018, 09:19 PM
I've been running the 22 4.0 since September and have tried a few 'team setups' but I haven't got the feeling from the car that I wanted.
So I decided to try the long VLA and tune the setup to suit.
For me, it's totally changed the car,
it now jumps more level 'the rear doesn't kick up' both off jumps and over bumps. This is my current setup and for me the car has been great running this.
https://farm5.staticflickr.com/4761/39632010034_cd75632ae5_b.jpg (https://flic.kr/p/23o9pPQ)20180212_210232 (https://flic.kr/p/23o9pPQ) by Mark Redmond (https://www.flickr.com/photos/140244276@N02/), on Flickr
mark-rc
26-04-2018, 01:17 PM
This is my set up that I used to finish 2nd in the A final in the North West Regionals at Ulverston 'Very short pile astro'
https://farm1.staticflickr.com/863/41715701661_2189362f30_b.jpg (https://flic.kr/p/26ygSKx)2018-04-26_02-01-56 (https://flic.kr/p/26ygSKx) by Mark Redmond (https://www.flickr.com/photos/140244276@N02/), on Flickr
I ran long VLA at Boughton Raceway last year and found it to be good where you have a a lot of medium to high speed corners.
Also ran flipped bellcranks and the TLR234007 spindles from the 22 2.0, a well worth while modification which helps to make the steering feel very smooth and consistent on high bite surfaces.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.