PDA

View Full Version : Tamiya TRF511 Re-Build/Re-Store.


xfactor
19-03-2018, 02:24 PM
Hi all,

For those who are interested, I thought I would do a complete Re-Build/Re-Store of my TRF511.

I have been collecting for a while now a lot of new in packet parts.

These are,

TRF Complete Screw Kit including Tamiya Blue Screws
New Chassis
New Top Decks
New Complete Blue Parts (the complete 511).
New in Packet TRF 511 Shocks
New wishbones
New Diffs
New Belts
New centre slipper
New in packet Tamiya TRF 511 Original Body and Undertray set.

To name a few.

Once I get the chance, I will do a complete picture step by step build.:thumbsup:

suparajicon
19-03-2018, 03:12 PM
that`s great!

I was thinking of building one too, I think I¨m just missing shocks..body..and small parts like bearings..
Oh, and the layshaft..that can be hard to get maybe..

MHeadling
19-03-2018, 03:17 PM
Sounds good to me!!

I do love a 511, had about 6/7 over the years, rebuilt one a few years back and its on the shelf with the rest of my old school rc cars

MHeadling
19-03-2018, 03:21 PM
One of my old upgrade pack 511

MHeadling
19-03-2018, 03:21 PM
Internals

MHeadling
19-03-2018, 03:22 PM
My current car that's on the shelf, raced it in shorty layout about 2 years back, went pretty well for an old car

xfactor
19-03-2018, 05:25 PM
that`s great!

I was thinking of building one too, I think I¨m just missing shocks..body..and small parts like bearings..
Oh, and the layshaft..that can be hard to get maybe..

Hi suparajicon,

Yes, some of the parts from you, but most from all around the world :thumbsup:

xfactor
19-03-2018, 05:25 PM
My current car that's on the shelf, raced it in shorty layout about 2 years back, went pretty well for an old car

Yes Marko,,,,,,, Its where its at matey.......:thumbsup::thumbsup::thumbsup:

xfactor
19-03-2018, 08:33 PM
So here we go.

Diffs front and rear completely stripped, rebuilt and dust side stickers fitted. New Belt adjusters fitted also.

Centre slipper completely rebuilt.

New genuine Tamiya belts ready to join the above together.

As new instructions and genuine set up sheet...

More pictures of the new parts collected tomorrow, then the step-by-step build will begin.....


CLICK TO ENLARGE PICTURES.....

xfactor
19-03-2018, 09:21 PM
Pictures show, the New in packet Standard Chassis and Top Decks.....

Thanks to suparajicon (A while back).........:thumbsup:

The best bits tomorrow......:D

CLICK TO ENLARGE....

xfactor
21-03-2018, 07:00 PM
And the BEST BITS !!!

Complete TRF511 Blue parts New In Packets...... Enough Said....:D

Look at that GLOW of TRF BLUE......


CLICK TO ENLARGE PICS.

GRIFF55
22-03-2018, 09:01 PM
Where did you find the screw kit?

xfactor
23-03-2018, 05:02 PM
Where did you find the screw kit?

Hi GRIFF,

Screws are from Austria and DMSracing.:thumbsup:

xfactor
23-03-2018, 05:04 PM
New in Packet TRF Shock Set, including Gold Shafts.....

CLICK TO ENLARGE....

Aire valley
23-03-2018, 07:49 PM
Hi Mark....wondered where you had disappeared to after selling your Associated, and PR, kits..😟
I can see know why you needed the funds...those TRF parts don't come cheap..😉......and you have obviously been travelling the world collecting parts..!
Looks a great kit...will follow your build with interest..

xfactor
27-03-2018, 06:22 PM
Hi Aire,

Yes matey, all round the World. I still have a few Tamiya TRF blue bits to come, original Tamiya TRF511 Front and Rear shock towers and original new in packet TRF511 Decal sheet, these are from Japan and Hong Kong.........:thumbsup:

xfactor
27-03-2018, 06:25 PM
So Tamiya TRF511 full screw kit turned up today, along with blue screws and blue bits !!!!!:)

Almost there with parts now. Still waiting on a few Tamiya TRF options to come, but ready to start the build........:thumbsup:

MHeadling
27-03-2018, 06:58 PM
Looking good mate!

xfactor
27-03-2018, 07:38 PM
Cheers Marko.:thumbsup::thumbsup:

xfactor
30-03-2018, 03:30 PM
Hi all,

I've managed to start the build of the TRF511 today. I will post pictures later.....:thumbsup:

xfactor
30-03-2018, 05:18 PM
So fresh out the packets,

Chassis and Bag A blue parts, Centre Bulkhead. Steering plate with blue posts, diffs, new screws and new Tamiya blue nuts.

Also photos show installed to the new chassis.:)

Click to enlarge pics.......:thumbsup:

xfactor
30-03-2018, 05:58 PM
Centre Slipper fitted, New Belts, New Screws and Blue Screws.

Click to Enlarge.....

Aire valley
30-03-2018, 08:02 PM
Good start....cool bits..! 👍

xfactor
31-03-2018, 12:45 PM
Thank you Aire,

Managed to do a little bit more. Sent the Mrs out shopping for Easter.....:D:D:thumbsup:

xfactor
31-03-2018, 12:50 PM
The rear diff, rear hangers, top decks, rear bulkheads and new screws ready to install.....:thumbsup:

Click to enlarge pictures....

xfactor
31-03-2018, 12:56 PM
So Diff went in like a dream. Why Tamiya stopped making the TRF stuff is beyond me. Its just a work of art and the bling factor, well !! its just that TRF Blue against the carbon.... Stunning, Just Stunning.......:)

Click to enlarge pictures.....

xfactor
31-03-2018, 01:08 PM
Rear top deck fitted with Blue Screws. Rear bulkhead fitted just to hold rear diff for now until the Tamiya Shock Towers turn up.....:thumbsup:

New rear wishbone hangers fitted along with new screws......

New rear ballstud mounts fitted. As can be seen taken from Bag D......:)

Click to enlarge pictures......

JamieStewart
31-03-2018, 04:00 PM
I have some spare bearings etc - they're used but shout if they'd help - will do a reasonable price on eBay - I splashed out £50 on Acer ceramics you see - may have a latshaft new too - that's for the chap thinking of doing one up...

xfactor
31-03-2018, 05:35 PM
I have some spare bearings etc - they're used but shout if they'd help - will do a reasonable price on eBay - I splashed out £50 on Acer ceramics you see - may have a latshaft new too - that's for the chap thinking of doing one up...

Hi JamieStewart,

I'm ok for parts and bits, but thanks for the offer. I would pm him about the layshaft though..........:thumbsup:

Aire valley
31-03-2018, 07:39 PM
Looking superb Mark...:thumbsup:..
I agree about TRF, but Tamiya seem to want to concentrate on mass market , plastic, kits.... I guess that's where the money is though......how many TRFs would they sell compared to,say, Lunchboxes..!

xfactor
31-03-2018, 07:47 PM
Looking superb Mark...:thumbsup:..
I agree about TRF, but Tamiya seem to want to concentrate on mass market , plastic, kits.... I guess that's where the money is though......how many TRFs would they sell compared to,say, Lunchboxes..!

Well matey

New in Box.......

..:lol::lol::lol::lol::lol::lol::lol::lol::lol::lo l::lol::lol::lol::thumbsup:

xfactor
01-04-2018, 03:36 PM
So managed to complete the steering and New bulkheads. Steering, I went with the stand steering plastic linkage. Picture shows front wishbone hangers fitted along with the front bulkheads.....

Next up, steering and diff install......

Click to enlarge...

GRIFF55
01-04-2018, 03:45 PM
Very nice!!

xfactor
01-04-2018, 03:48 PM
So steering was completely stripped and cleaned, came up like new. A lot easier than cleaning 1990/91 white nylon parts..:D I went with the standard plastic linkage rather than the Tamiya blue alloy. Steering nice and free. Diff went in like a dream.

Again top bulkhead fitted just to keep diff in, while awaiting Tamiya Shock Tower..

Click to enlarge.....

xfactor
01-04-2018, 03:49 PM
Very nice!!

Thank you GRIFF.......:)

xfactor
01-04-2018, 04:29 PM
My !! OCD at its best. Getting the letters on the belts to match up......:D

Click to enlarge..

xfactor
01-04-2018, 04:34 PM
New Top Deck Front fitted, along with new blue screws and new body posts.....


Click to enlarge...

Aire valley
01-04-2018, 05:50 PM
It really is a lovely kit, built to your usual standard.👍...but what are those black screws doing there on the front diff housing..! 😂.....
Alan.....

xfactor
01-04-2018, 09:15 PM
It really is a lovely kit, built to your usual standard.👍...but what are those black screws doing there on the front diff housing..! 😂.....
Alan.....

Come on Alan.:thumbsup:

Its TRF Reverse matey. Blue screws on Black. Black screws on Blue.

:lol::lol::lol::lol::lol::lol::lol::lol::lol::lol: :lol:

Aire valley
02-04-2018, 07:36 PM
You're way ahead of me Mark..!😂👏...a different league...!

xfactor
02-04-2018, 08:33 PM
You're way ahead of me Mark..!😂👏...a different league...!

:thumbsup::thumbsup::thumbsup::thumbsup:

xfactor
02-04-2018, 08:40 PM
So up next the Rear End.

Hinge pins cleaned and checked. All straight and as new............:)

Bearings cleaned and Trinity royal oiled............................:)

New rear Carbon wishbones......................................:)

New TRF Blue Rear Brace...............................:)

Driveshaft stripped cleaned like new.....:)

New polished turnbuckles and Tamiya Black ends.......:)

Rear hubs as used by Lee Martin back then.......:)

New wishbone screws..........:thumbsup:

New Blue large axle washer...

Click to enlarge.....

xfactor
02-04-2018, 09:01 PM
Rear End installed. :thumbsup:

Aire valley
03-04-2018, 02:43 PM
Now its really taking shape and looking good...! 👍

xfactor
03-04-2018, 05:25 PM
So next up front end.....

New Carbon front wishbones, New TRF blue front brace, New polished turnbuckles, New turnbuckle ends, bearings royal oiled, New outer bearings, Driveshafts stripped and cleaned, came up like New, New blue wheel nuts, cleaned steering arms again like New.........:)

Click to enlarge.........

xfactor
03-04-2018, 05:39 PM
I have been searching for, genuine Tamiya Grey Ballstud Dust Covers, and YES !!! I have found some New in packet.... :thumbsup: Once here I will post pictures.

I also have a few Tamiya Hop-Ups coming. They should be here soon.

Had the Alloy Shock Bushings turn up today......:thumbsup:

Click to enlarge......

xfactor
03-04-2018, 06:23 PM
Front New Carbon Wishbones fitted to the TRF511 along with the New Blue TRF Front Brace. Now were starting to look like a TRF511.....

Awaiting New 12 degree castors for the front. Once here the Driveshafts etc.... will go on....:)

Click to enlarge.....

xfactor
03-04-2018, 07:30 PM
Diff covers Front & Rear fitted. New Roll Bar brackets and Screws. New Rear bumper fitted with New screws also.....:)

I don't understand why Tamiya didn't make the Diff covers a little longer, so the section went over the Diff pulleys. Oh well, no matter now.......

Click to enlarge pictures.....

xfactor
03-04-2018, 07:53 PM
New Front & Rear Bumpers fitted......:)

Click to enlarge pictures.......

Aire valley
03-04-2018, 09:14 PM
You're working too fast...you'll be finished soon..then what will you do...? 😂

xfactor
03-04-2018, 10:28 PM
:lol::thumbsup::thumbsup:

Still a lot to do Alan. I will be held up for a while until the other parts and hop-ups come from Hong Kong, Japan and Germany.

Plus I have the body to paint as well.:thumbsup:

Next up will be the New Shocks to build............:thumbsup:

xfactor
04-04-2018, 12:21 PM
Post man just dropped a packet through the door.....:D

New 12 degree caster blocks. So will complete front end now and then on to the shocks build......:thumbsup:

Click to enlarge....

xfactor
04-04-2018, 07:08 PM
Caster Blocks Fitted with New King Pins, Driveshafts, Steering arms, New blue wheels nuts, New polished turnbuckles with New black ends, New wishbone hinge pin screws.....:)

xfactor
05-04-2018, 11:34 AM
A few pictures of the Original TRF511 Body & Undertray with TRF Instructions..

Body date 2009 Number 54133 Stamped in Lexan side.

Undertray date 2009 Number 54133 08.

Click to enlarge pictures.....

xfactor
05-04-2018, 08:58 PM
Got a little time on the TRF 511 today.

I fitted the Battery screw down posts and Carbon Fibre battery straps. New screws and blue washers fitted also.....

New Chrome and Blue TRF stickers fitted to the straps...

I do have the TRF 502 Lipo cradles but they wont be fitted as I wont be running it......:)

The battery posts are a perfect match for the Tamiya TRF Blue....:)

Click to enlarge.....

xfactor
06-04-2018, 08:56 PM
So on to the shocks.

Shocks fresh out the box. All parts set out ready for the build....:)

Click to enlarge.....

xfactor
07-04-2018, 11:46 AM
Shocks went together again fantastic. Forgot how good these shocks were/are.

To be honest, I've never used the Tamiya Shock Oil that comes in the kits. But, I thought, I would use it for this build, as the TRF511 wont be drove by me and good enough for the shelf....:D and to be honest I'm shocked !! :D at how good it feels.

The shocks have been built to kit spec, and how the shocks show in the instructions.

Pictures show rod guides fitted to the shock cartridges and shock bodies.

TRF Gold shafts with pistons fitted.

Click to enlarge......

xfactor
07-04-2018, 11:50 AM
Up next,

Shock orings and spacers. All covered in that nice yellow Tamiya TRF shock oil.

Oil placed all over the orings, in the cartridges, bodies and shafts as not to snag any of the orings....:thumbsup:

Click to enlarge pictures.....

xfactor
07-04-2018, 11:53 AM
On to,

New rod ends and shock balls. Shock pliers used as not to mark the Gold Shafts....:thumbsup:

Click to enlarge Pic......

xfactor
07-04-2018, 11:56 AM
On to,

The New shock caps require drilling to allow the tops to vent oils. Why Tamiya didn't do this is beyond me. Oh well, no hard ship. All caps drilled in the inside centre, New screws in place ready....:thumbsup:

Click to enlarge Pictures....

xfactor
07-04-2018, 12:02 PM
So the final part,

Shocks filled with Tamiya Yellow Soft oil...:D Actually they feel really good.

New Blue adjusters with New orings fitted, New white TRF Springs (RED) all round as these came in the kit. Caps fitted and vented. Ready for the TRF511 Now.....:thumbsup:

Awaiting parts to turn up to complete the build. As soon as these turn up, I will post pictures......:)

Click to enlarge Pictures.

Aire valley
07-04-2018, 02:29 PM
So on to the shocks.

Shocks fresh out the box. All parts set out ready for the build....:)

Click to enlarge.....


You don't have OCD by any chance Mark..! 😂......if I did that, one sneeze and the parts would be all over the room..! 😱😂

xfactor
07-04-2018, 05:04 PM
You don't have OCD by any chance Mark..! 😂......if I did that, one sneeze and the parts would be all over the room..! 😱😂

Apparently I do have OCD according to the Mrs, or she thinks I'm mad. Could be both...:lol::lol::lol::lol::lol::lol::lol::lol::lo l::lol:

xfactor
11-04-2018, 12:26 PM
Just had the Original Tamiya Dust Covers turn up.......:D

Big job for later to install these...:)

Click to enlarge....

xfactor
12-04-2018, 08:55 PM
Well it was tuff, but I managed it.

Dust Covers fitted to the complete TRF511.....:)

Click to enlarge..

Aire valley
14-04-2018, 06:20 PM
That is looking really great Mark, as to be expected from you...! 👍😄

xfactor
16-05-2018, 09:19 PM
Hi all,

Just an up-date.

The parts I'm waiting for from Tamiya Japan, should be with me over the weekend or early next week.

Once in my hands, I will be able to complete the TRF511.....:)

Donutt
18-05-2018, 02:06 PM
Inspiring thread.
I've been a Tamiya fanboy of the TRF511 since it first came out.

Since then, I've grown my collection to include:

TRF501 (with all red alloy parts!)
TRF511
TRF503 (carbon chassis as well as alloy!)
DB01 (plastic version of belt drive TRF511)
DB02 (plastic version of shaft drive TRF502)
...and finally, just arrived the other week from Japan, a new in the box TRF502


AFAIK, that's the full list. I'll post pics after the weekend to let everyone have a drool.

The 503 is the only runner, but then, why wouldn't you have at least one of them running?
I kept a lot of spares for it, so it's going to be a few years before it's "halted"...

xfactor
06-06-2018, 05:10 PM
Nice one Donutt.....:thumbsup:

Lets see your Tamiya TRF Buggies...........:)

xfactor
06-06-2018, 05:11 PM
Just had the message.

Parts Ive been waiting for are here.....:D

As soon as I have them, should be Friday, I will complete the TRF511....:thumbsup:

Donutt
06-06-2018, 05:50 PM
Nice one Donutt.....:thumbsup:

Lets see your Tamiya TRF Buggies...........:)

Apologies for the delay - mad two weeks.
I'll get that done at the weekend...

xfactor
06-06-2018, 05:53 PM
:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:

Donutt
07-06-2018, 03:20 PM
Here's my TRF Family from DB01 to TRF503.

From L to R: DB02, TRF502, TRF503, TRF511, DB01, TRF501

http://tamiya.iannetta.co.uk/images/20180607_144301.jpg

I've put together a small gallery webiste to show them in closer detail.

http://tamiya.iannetta.co.uk/

xfactor
07-06-2018, 03:28 PM
Nice Donutt, Very nice.........:thumbsup:

xfactor
10-06-2018, 11:42 AM
My wait is over. I have the parts I've been waiting for, so later I will get some pictures up and will be able to complete the TRF511.....:thumbsup:

xfactor
10-06-2018, 04:28 PM
Finally,, here's the parts that I've been waiting for.

Tamiya TRF511 Genuine Front Shock Tower.
Tamiya TRF511 Genuine Rear Shock Tower.
Tamiya TRF511 Genuine Decal Set.

I will install towers and other parts later......:)

CLICK TO ENLARGE PICTURES....

xfactor
10-06-2018, 06:39 PM
Front shock tower, New screws and Tamiya Alloy Shock Bushings. Finally fitted to the Front of TRF511...........:)

CLICK TO ENLARGE....

xfactor
10-06-2018, 06:44 PM
Rear shock tower, New screws and Tamiya Alloy Shock Bushings. Fitted to the Rear of the TRF511.. Tamiya blue nuts ready for the New shock install next....:thumbsup:

CLICK TO ENLARGE PICTURES..

xfactor
10-06-2018, 06:50 PM
Front and Rear New TRF Aeration Shocks fitted, with New screws and Blue Nuts and Washers..

CLICK TO ENLARGE PICTURES......

xfactor
10-06-2018, 06:58 PM
New wing mounts and New body mount installed. Also fitted is a New aerial mount and New Servo mounts. Tamiya blue Exotek wing buttons ready for the New wing...

I also have an original New blue Tamiya kit aerial tube which will be fitted later.:)

CLICK TO ENLARGE PICTURES...

xfactor
10-06-2018, 08:14 PM
Cut out and fitted a New undertray for the TRF511. I have kept the Original in the packet with the body.

This undertray is by PENGUIN CUSTOM BODY SHELLS and is a perfect fit. Quality as normal and extra lexan at the front and rear so you can take the lexan under the bumpers (front especially)....:thumbsup:

CLICK TO ENLARGE PICTURES....

xfactor
11-06-2018, 03:09 PM
So here are the final Pictures of the complete TRF511.

New wing fitted, New front and rear wheels fitted, blue wheel nuts, original box, original instructions, original set up sheet and genuine Tamiya TRF511 decal sheet. How could I forget the genuine Tamiya Blue Aerial tube.:o

Enjoy !!.................:thumbsup:

CLICK TO ENLARGE PICTURES...............:thumbsup:

Aire valley
11-06-2018, 07:31 PM
Beautiful job Mark, as always....👍..would like to see it with body painted..!

xfactor
11-06-2018, 08:29 PM
Beautiful job Mark, as always....👍..would like to see it with body painted..!

Ok matey.

I wasn't going to paint the body, but I do have a spare TRF511 PENGUIN CUSTOMS BODY SHELL.

So will try and paint a Tamiya TRF Paint scheme this week for it....:thumbsup:

marco NL
15-09-2018, 09:54 PM
Finally,, here's the parts that I've been waiting for.

Tamiya TRF511 Genuine Front Shock Tower.
Tamiya TRF511 Genuine Rear Shock Tower.
Tamiya TRF511 Genuine Decal Set.

I will install towers and other parts later......:)

CLICK TO ENLARGE PICTURES....


Yo mate

where can I find these parts?

I also have a trf511 that I am going to rebuild

hope you have few addresses where I can buy parts

Thanks Marco

xfactor
16-09-2018, 01:21 PM
Yo mate

where can I find these parts?

I also have a trf511 that I am going to rebuild

hope you have few addresses where I can buy parts

Thanks Marco

Hi Marco,

I get my Tamiya parts off Tony at Tony's Tamiya Parts. Hes based in the UK.

He is also on Ebay under ...... Tonys Tamiya Parts ...... If you message him on Ebay with what you want he will get it. If Tamiya has it !!!

He normally traces the parts and then sends you the total cost. You then go from there...........:thumbsup:

Hope that helps...........:thumbsup:

marco NL
16-09-2018, 10:48 PM
Hi Marco,

I get my Tamiya parts off Tony at Tony's Tamiya Parts. Hes based in the UK.

He is also on Ebay under ...... Tonys Tamiya Parts ...... If you message him on Ebay with what you want he will get it. If Tamiya has it !!!

He normally traces the parts and then sends you the total cost. You then go from there...........:thumbsup:

Hope that helps...........:thumbsup:




Many Thanks Mark

I can get a lot out of hong, but they do not have everything
I'm going to contact him

You had a nice project love it

Marco

5POINTSTAR
21-12-2019, 05:00 AM
Keep us updated, rebuilds are cool as I'm doing a 501X with new electronics