View Full Version : Schumacher L1
mark christopher
21-03-2018, 02:17 PM
http://www.racing-cars.com/pp/Car%20Showroom/CAT%20L1.html
http://www.racing-cars.com/pp/Car%20Showroom/images/CAT_L1_FTQ_1000.jpg
DescriptionPart NoPrice Including 20% UK VAT.Quantity CAT L1 - KitK176£479.99http://www.racing-cars.com/pp/Car%20Showroom/images/button_buy.gif
http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif CAT L1 Specification Equipment Needed http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif
2 Channel Radio
Motor
Servo
Electric Speed Control
Tyres
Long Boss Motor Pinion
2s Shorty or Saddle Lipo
Paint for Bodyshell
Power Source: ELECTRIC Model Type: 4WD, OFF-ROAD, COMPETITION Length: 375mm Wheelbase: 280-286mm Width: 250mm Top Speed: 40 MPH+ Features
http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif http://www.racing-cars.com/pp/Car%20Showroom/images/pixel.gif Transmission
http://www.racing-cars.com/images/NEW_logo_50.jpg Alloy chassis side stiffeners.
http://www.racing-cars.com/images/NEW_logo_50.jpg 3 Gear transmission for opposite motor rotation, improves agility and steering on high traction surfaces.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lightweight layshaft and side gears.
http://www.racing-cars.com/images/NEW_logo_50.jpg Small, low rotating mass gear differentials. With 3 position height adjustment, to adjust for driveshaft plunge and mixed track conditions.
http://www.racing-cars.com/images/NEW_logo_50.jpg Durable polyurethane drivebelts.
http://www.racing-cars.com/images/NEW_logo_50.jpg FAB (Front Adjustable Brake System) with larger 22 tooth pulleys included.
http://www.racing-cars.com/images/NEW_logo_50.jpg Low CofG pinned and centre mounted motor mount.
http://www.racing-cars.com/images/NEW_logo_50.jpg Alloy front transmission housings with steering mounting for increased rigidity.
http://www.racing-cars.com/images/NEW_logo_50.jpg Alloy upper front housings with lower CofG.
http://www.racing-cars.com/images/NEW_logo_50.jpg Alloy rear lower transmission housings with improved belt tensioner.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lighter alloy rear upper housings for low CofG.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lightweight, twin pad slipper clutch with Ultra Fine adjustment spring.
http://www.racing-cars.com/images/NEW_logo_50.jpg Strong steel universal driveshafts with 5mm axles.
http://www.racing-cars.com/images/NEW_logo_50.jpg Hard anodised 12mm wheel hex.
http://www.racing-cars.com/images/NEW_logo_50.jpg Larger 5x11x4 layshaft and pulley bearings increase durability and precision.
Optional ball diff available.
Includes 33 super precision ball bearings.
Chassis
http://www.racing-cars.com/images/NEW_logo_50.jpg Hard anodised 2mm 7075-T6 alloy chassis with 4mm carbon stiffeners.
http://www.racing-cars.com/images/NEW_logo_50.jpg Vertical top decks for increased linear flex.
http://www.racing-cars.com/images/NEW_logo_50.jpg Alloy floating servo mount pinned into the chassis.
http://www.racing-cars.com/images/NEW_logo_50.jpg Adjustable shorty locating system. Enables ultra precise fitment.
http://www.racing-cars.com/images/NEW_logo_50.jpg Multiple Ackerman position alloy centre track rod.
Shorty and saddle LiPo compatible.
http://www.racing-cars.com/images/NEW_logo_50.jpg Cable management system for neater wire installs.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lightweight battery posts.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lower, smaller front bumper - housing front roll bar and suspension.
http://www.racing-cars.com/images/NEW_logo_50.jpg Front wing mount.
http://www.racing-cars.com/images/NEW_logo_50.jpg Aerox Body and Schumacher wing.
Battery thumb screws.
Suspension
http://www.racing-cars.com/images/NEW_logo_50.jpg Wishbones with new improved geometry.
http://www.racing-cars.com/images/NEW_logo_50.jpg Geometry steering yokes.
http://www.racing-cars.com/images/NEW_logo_50.jpg Rear hub carrier. Featuring new vari-length wishbone and hub geometry.
http://www.racing-cars.com/images/NEW_logo_50.jpg Hub Carriers.
http://www.racing-cars.com/images/NEW_logo_50.jpg Stronger 3.5mm diameter front inboard pins.
http://www.racing-cars.com/images/NEW_logo_50.jpg Front pivot strap inserts for front track width adjustment. And new 8°, 10°, 12° front rake adjustment.
http://www.racing-cars.com/images/NEW_logo_50.jpg Anti Roll bars included with centralising collar.
http://www.racing-cars.com/images/NEW_logo_50.jpg Strong, rigid 4mm carbon fibre shock brackets.
http://www.racing-cars.com/images/NEW_logo_50.jpg Lightweight front shock tower cover to protect your car and the track from damage.
http://www.racing-cars.com/images/NEW_logo_50.jpg Front wheelbase adjustment for improved tuning.
Shocks
http://www.racing-cars.com/images/NEW_logo_50.jpg Big bore shocks with big bore “CORE” springs, titanium nitride shafts, twin o-ring sealing, optimised shock body.
http://www.racing-cars.com/images/NEW_logo_50.jpg Ball mounted two piece shock cap for easier building, maintenance, vented option and lighter weight.
http://www.racing-cars.com/images/NEW_logo_50.jpg Threaded spring collars for better location.
Super lightweight design.
stuey
21-03-2018, 02:20 PM
Looks like a very nice car, but ouch on the RRP!
Origineelreclamebord
21-03-2018, 02:55 PM
With the beefed up wishbone I had hoped for more reinforcement elsewhere, to be honest. And nearly 500 quid... Does that include free replacement parts & tires or something? :lol:
daz75
21-03-2018, 03:02 PM
With the beefed up wishbone I had hoped for more reinforcement elsewhere, to be honest. And nearly 500 quid... Does that include free replacement parts & tires or something? :lol:
Especially when the world champ winning yoke can be had for £20 less :woot:
iank55
21-03-2018, 04:01 PM
Especially when the world champ winning yoke can be had for £20 less :woot:
Thats the RRP... the RRP on the world champ winning yoke is £509.99.
Most shops selling both kits for £50 less than RRP therefore the world champ winning yoke is still, er, more.
Both are still way more than I'm prepared to pay for a toy car tho!
daz75
21-03-2018, 04:09 PM
Thats the RRP... the RRP on the world champ winning yoke is £509.99.
Most shops selling both kits for £50 less than RRP therefore the world champ winning yoke is still, er, more.
Both are still way more than I'm prepared to pay for a toy car tho!
Same here
Looking at those pictures of the L1 I reckon they are CAD drawings not pictures of the real car
brian s
21-03-2018, 04:36 PM
see here
https://www.youtube.com/watch?v=36qule-DbT4
Navek668
21-03-2018, 04:51 PM
To be fair, the K2 was 380 rrp, the new cat has the alloy gear box tops included which were a £30 option for each, so if you can get the new kit for £440 it’s the same price as the K2, I’m fine with that tbh oh and the inclusion of the roll bar kits which were £13 each
daz75
21-03-2018, 05:06 PM
To be fair, the K2 was 380 rrp, the new cat has the alloy gear box tops included which were a £30 option for each, so if you can get the new kit for £440 it’s the same price as the K2, I’m fine with that tbh oh and the inclusion of the roll bar kits which were £13 each
Surely a cheaper car with upgrade available means club racers are more likely buy the cheaper option and upgrade if required
£430 for it at mbmodels
Carlos69
21-03-2018, 08:44 PM
For clay/outdoors an undertray would be desirable ...
Stu Dixon
21-03-2018, 09:16 PM
Looks a very nice buggy :thumbsup:
mintzant
22-03-2018, 09:08 AM
After a long time Schumacher changed front and rear arms of their buggies...
I hope new one are harder........
I’m going to try in my cat k2
AmiSMB
22-03-2018, 09:16 AM
Like the look of the car but I can see that you may need to get the optional alloy castor blocks for the front and also the need for long boss pinions which would suggest that none of mine would be able to fit due to location of the motor.
mark christopher
23-03-2018, 07:18 PM
it comes with alloy gear box tops, anti roll/sway bars, FAB, alloy steering rack in the kit.
its something like 95% new and i doubt the arms will fit the k2. most of the team ran the 10 degree kit caster blocks on the k2, 10 are on this after lots of testing.
if you watch the the live feed on facebook, its had some high speed impact testing done .
ill be upgrading without a thought!
fidspeed
23-03-2018, 07:22 PM
On order :thumbsup:
Typpo
23-03-2018, 09:28 PM
Based on the exploded diagram, the rear arms may fit. However, according to the website, it looks like the front arm inner hinge pins have a different diameter than the K2 version.
daz75
23-03-2018, 11:55 PM
So what are the pros and cons of belts over shaft driven 4wds?
cmgreen
24-03-2018, 08:59 AM
So what are the pros and cons of belts over shaft driven 4wds?
I think, Belts accelerate faster, the motor is in the correct direction to generate grip, also in the correct direction for faster corner speed.
micholix
27-03-2018, 08:42 AM
Like the look of the car but I can see that you may need to get the optional alloy castor blocks for the front and also the need for long boss pinions which would suggest that none of mine would be able to fit due to location of the motor.
At the Pictures of Orlowsky's L1 at the EOS from last Weekend, it looks like, he was using standard pinion, so may it is not naccesary to run long boss pinions ony!?
enclose is the link to RedRc Gallery:
http://eos.redrc.net/gallery/3/?envira_id=21146#envira-gallery-wrap-21146
PS.: i was there on saturday to watch the races, the Cat L1 was looking even more incredible in nature.
mark christopher
27-03-2018, 09:43 AM
Short boss do fit, long boss are more secure
AmiSMB
27-03-2018, 11:26 AM
Short boss do fit, long boss are more secure
That is good to know :)
I really like the look of the car and am interested in the fact that in the pictures there was no alterations in the front cactus tyres but am not sure if that is before they had any pins cut off before a run.
I went through some of the exploded diagrams of the current CAT range on the Schumacher website and comparing them I think that the L1 looks a very nice and simplistic design and should do well.
charlesk
27-03-2018, 11:43 AM
That is good to know :)
I really like the look of the car and am interested in the fact that in the pictures there was no alterations in the front cactus tyres but am not sure if that is before they had any pins cut off before a run.
Before they actually run it. If you look at the action shots, then the same heavy trimming was used as the other teams. Not an issue, it just means that the L1 has a lot more natural steering than it's predecessor (which is a good thing)and that the front cactus isn't great out of the pack on EOS (which we already know).
It looks nice, well thought out and quick. Only potential drawback the slightly fragile top decks, but should be a good car.
mark christopher
27-03-2018, 02:19 PM
Before they actually run it. If you look at the action shots, then the same heavy trimming was used as the other teams. Not an issue, it just means that the L1 has a lot more natural steering than it's predecessor (which is a good thing)and that the front cactus isn't great out of the pack on EOS (which we already know).
It looks nice, well thought out and quick. Only potential drawback the slightly fragile top decks, but should be a good car.
What makes you say they are fragile?
before i take the plunge,a couple of questions......the optional ball diffs,are they the ones from the k2?and as i run on low grip stuff is it possible to run rear shocks on back of wishbones?thanks.
AmiSMB
28-03-2018, 07:54 AM
I am thinking that the ball diff will be more like the KC ball diff as the K2 ones are too big. The KC ball diff pulley is different in size to the KC gear diff pulley
Kev B
28-03-2018, 07:55 AM
If you look at pics 3 and 5 on the Schumacher page you can see holes in the rear wishbones and also rear mounting of the shock tower
daz75
28-03-2018, 08:57 AM
I went through the instructions yesterday and to my novice eyes the belts all look very complicated is it easier to install setup and maintain than it looks?
AmiSMB
28-03-2018, 10:26 AM
It is easier to maintain than it looks from the exploded diagram. I think that the L1 is the simplest and tidiest layout I have seen so far in the CAT range.
charlesk
28-03-2018, 01:23 PM
I went through the instructions yesterday and to my novice eyes the belts all look very complicated is it easier to install setup and maintain than it looks?
Won't be as easy as the leading shaftdrive platforms for that, but will be easy enough esp once you get used to it. Wouldn't let that put you off.
cmgreen
29-03-2018, 08:18 AM
But it will be faster and more efficient than any shaft drive car, proven :thumbsup:
Fastest 4wd out there at the moment!
cmgreen
29-03-2018, 08:35 AM
What makes you say they are fragile?
Still no answer!
daz75
29-03-2018, 01:17 PM
But it will be faster and more efficient than any shaft drive car, proven :thumbsup:
Fastest 4wd out there at the moment!
Proven how?
cmgreen
29-03-2018, 01:56 PM
Proven how?
If you read the EOS on RED RC :thumbsup:
daz75
29-03-2018, 02:42 PM
If you read the EOS on RED RC :thumbsup:
Links???
CHEVY
29-03-2018, 03:04 PM
cmgreen stop spitting your dummy
everyone is entitled to have there free say:thumbsup::thumbsup:
cmgreen
29-03-2018, 03:42 PM
cmgreen stop spitting your dummy
everyone is entitled to have there free say:thumbsup::thumbsup:
Not spitting anything :p:p
And if you cant be bothered to find it on Red RC i cant be bothered to post it :thumbsup:
daz75
29-03-2018, 04:29 PM
cmgreen stop spitting your dummy
everyone is entitled to have there free say:thumbsup::thumbsup:
Maybe he means this one about an X-ray win :woot:
http://eos.redrc.net/2018/03/coelho-grabs-victory-at-eos-austria/
Mic_B1
30-03-2018, 09:01 AM
it comes with alloy gear box tops, anti roll/sway bars, FAB, alloy steering rack in the kit.
its something like 95% new and i doubt the arms will fit the k2. most of the team ran the 10 degree kit caster blocks on the k2, 10 are on this after lots of testing.
if you watch the the live feed on facebook, its had some high speed impact testing done .
ill be upgrading without a thought!
Anybody knows what is actually included in the kit in terms of springs and roll bars ?
The exploded diagram shows part numbers that refer to the full spring set, or full set of roll bars. It is unlikely to be all of them... But then why does it not mention the actual part number for the specific spring or roll bar included...
Thanks !
micholix
30-03-2018, 10:18 AM
I‘m actually pritty excited about the cat L1, i do realy like the touring stile center mount of the transmission and the kind of mounting of the top decks!
If i would race more often, i would get one for myself, but i still have my, at the release in 2016 bought and built, never drove K2, full with all new electrics standing at the shelf, so it is still virgin....:)
May someone is looking for a K2, with quit a lot of spares, i would be willing to talk about! ;):D
SteveA
30-03-2018, 05:35 PM
Hi all, does anyone know where to find the editable set up sheets for the L1 its not in manual or on the Schumacher websites :confused:, PETITRC have a link but it doesn't work as of yet.
I wonder if Yokomo will give a belt car another go.
knighthawk
31-03-2018, 06:31 PM
I wonder if Yokomo will give a belt car another go.
They’ve only just built an Xray Car, who knows, 😂
madmulc
03-04-2018, 11:43 AM
Does anybody know when in April the L1 will be released?
mark christopher
03-04-2018, 06:36 PM
Does anybody know when in April the L1 will be released?
yep a weekday, and ending in Y :p
daz75
03-04-2018, 08:47 PM
If the xls was anything to go by August :p
cmgreen
22-04-2018, 05:35 PM
http://eos.redrc.net/2018/04/eos-17-18-championship-winning-cars/
Well done guys! The best cars won!
daz75
27-04-2018, 10:04 PM
I assume some people must have theirs up and running by now, what's it like to build and race?
Allan1875
28-04-2018, 05:17 PM
I assume some people must have theirs up and running by now, what's it like to build and race?
I've done 2 meetings, one on grass one on Astro and the car was brilliant on both.
Build is flawless, very nice car.
Zilla
28-04-2018, 05:42 PM
Getting mine Tuesday along with a KC (got KD conversion kit on way) returning to sport and will be running at YORCC
daz75
28-04-2018, 06:27 PM
I've done 2 meetings, one on grass one on Astro and the car was brilliant on both.
Build is flawless, very nice car.
What 4wd were you using previously?
fidspeed
28-04-2018, 07:16 PM
Allan last ran TLR and I think Team C before that but al will confirm
Got ours Thursday is on build and hopefully out next Sunday 😀😀
Allan1875
30-04-2018, 02:00 PM
What 4wd were you using previously?
K2 previously.
daz75
30-04-2018, 02:23 PM
K2 previously.
Is this a big step forward over the k2?
Allan1875
30-04-2018, 07:07 PM
Is this a big step forward over the k2?
It's a massive improvement, certainly on high grip astro.
daz75
30-04-2018, 08:20 PM
It's a massive improvement, certainly on high grip astro.
:thumbsup: thanks
AmiSMB
08-05-2018, 09:56 AM
Well what can I say! This is the first time that I have bought a car which on the first run has been easy to drive and very competitive without having to do loads of changes to the setup. The car was really consistent and I was very happy with that. Did not break anything either which was lucky as I always double class but as the car is so new I do not have any spares at the moment.
Here was my setup for TORCH Summer R1 from the weekend.
RCADDICT21
09-05-2018, 03:56 PM
What parts do I need to get this bad boy up to speed? Alloy servo horn? Long pinions? Anything else?
fidspeed
09-05-2018, 04:44 PM
Currently nothing extra maybe rollbar kits and spring set for adjustability it's all good to go
Longnpinions definitely safer if you have any
Regards Dave
AmiSMB
10-05-2018, 08:16 AM
What parts do I need to get this bad boy up to speed? Alloy servo horn? Long pinions? Anything else?
Alloy servo horn and long pinions definitely. As you can see from my setup sheet I used the new blank pistons and hand drilled them and I think they are really good. Apart from that my car is completely standard and I was practising again last night and I beat my laps from Sunday with consistency which I was really pleased with. I have always wanted my 4wd to drive like the KC and now it feels like it does :) Very happy.
alessandro79
21-05-2018, 11:02 PM
L1 is good car for Dirt or is only for carpet?
OneSolidVato
06-09-2018, 06:41 AM
currently building up my first schumacher ever, have to say that i am super impressed with what i have seen so far. long time kyosho fan but have ran xray, associated and even the disastrous eb410 recently. ive got a good feeling about the L1 and think it will do well on my super grip carpet track!
i kind of went overboard with the hopups and bought pretty much everything available :blush:..
going to run the car stock first at least once and then everything will make its way onto the chassis. im thinking most beneficial items will be the aluminium diff housing and S2 towers along with the regular things like springs/swaybars..
has anyone ran the 4 or 3 pad slipper upgrade? in all my previous 4wd's i have had issues with slippers slipping and inconsistent feel when they warm up, which i have generally fixed by using fibreglass mckune pads, hoping the 4 pad schumacher solution will be the ticket here.
Allan1875
06-09-2018, 12:53 PM
currently building up my first schumacher ever, have to say that i am super impressed with what i have seen so far. long time kyosho fan but have ran xray, associated and even the disastrous eb410 recently. ive got a good feeling about the L1 and think it will do well on my super grip carpet track!
i kind of went overboard with the hopups and bought pretty much everything available :blush:..
going to run the car stock first at least once and then everything will make its way onto the chassis. im thinking most beneficial items will be the aluminium diff housing and S2 towers along with the regular things like springs/swaybars..
has anyone ran the 4 or 3 pad slipper upgrade? in all my previous 4wd's i have had issues with slippers slipping and inconsistent feel when they warm up, which i have generally fixed by using fibreglass mckune pads, hoping the 4 pad schumacher solution will be the ticket here.
Just go straight to the s2 towers, we run them everywhere.
I have ran kit slipper but I've just ordered the 3 plate slipper to see how it feels compared to kit.
AmiSMB
07-09-2018, 08:50 PM
I did not get on with the 4 pad slipper in the K2 and KF2 as I often found the inner most pad would slip under har acceleration so converted them back to 2 pad slippers. It is also advisable to use the newer slipper spring U7065 which comes with newer schumacher kits as a running change. I find that the white schumacher slipper pads to be inconsistent and are smaller than the slipper slot in the spur gear so I change them for AE slipper pads.
lynx75
09-05-2019, 11:51 AM
Is someone happy with the car please?
thanks
Mic_B1
09-05-2019, 12:01 PM
Is someone happy with the car please?
thanks
Fantastic car !
Moved from an XB4 and never looked back (well, except to see ones behind me :woot:)
lynx75
09-05-2019, 07:23 PM
Just got one along with the cougar laydown :woot:
Any advise for the build please?
Thanks
Mic_B1
09-05-2019, 08:05 PM
Just got one along with the cougar laydown :woot:
Any advise for the build please?
Thanks
LD is a great car too, I really like it. Fantastic amount of side bite compared to KC.
For the L1, the original chassis is on the weak side especially if you run Astro and high grip carpet. I would recommend the HD top decks. Also the S2 shock mounts. Get one of MO setup sheet and start from there.
lynx75
09-05-2019, 08:45 PM
LD is a great car too, I really like it. Fantastic amount of side bite compared to KC.
For the L1, the original chassis is on the weak side especially if you run Astro and high grip carpet. I would recommend the HD top decks. Also the S2 shock mounts. Get one of MO setup sheet and start from there.
Yes I will be using L1 only on astro and carpet, I will get HD top deck as soon as I can. How can I fix the tweak in the meantime please . Thanks a lot for the advice, waiting for more help :-).
These kits I will receiving in the coming weeks.
mark christopher
09-05-2019, 09:09 PM
Yes I will be using L1 only on astro and carpet, I will get HD top deck as soon as I can. How can I fix the tweak in the meantime please . Thanks a lot for the advice, waiting for more help :-).
These kits I will receiving in the coming weeks.
dont leave it, onces its where it is it stays,and changes the handling very little then fit the new top decks.
you can slaken the bolts detweek and retighten but it will go back
AmiSMB
10-05-2019, 04:03 PM
Very happy with my L1 so much better than the K2. Click here (https://torchracing.co.uk/wp-content/uploads/2018/05/GDF_TORCH_SUMMER_R1_06052018.pdf) for my setup and have just put the HD top decks on and it is really good.
lynx75
15-05-2019, 08:04 PM
Very happy with my L1 so much better than the K2. Click here (https://torchracing.co.uk/wp-content/uploads/2018/05/GDF_TORCH_SUMMER_R1_06052018.pdf) for my setup and have just put the HD top decks on and it is really good.
I will wait to get the kit I’ve ordered and build the cat l1. Any bulding tips, please?
lynx75
30-05-2019, 08:43 PM
Hi guys,
my new cat L1 is on the way, I will use the car on astro and carpet only. I have saddle packs only at the minute, I am wondering if it wont compromise the car handling rather than use the shorty battery. Any advise please?
Thanks
lynx75
14-06-2019, 09:23 PM
Ok, its time to build these kits. Which kit will be the first? Not sure yet :-)
Typpo
28-06-2019, 06:16 PM
Does the L1 shell fit on the K1/K1 Aero series?
Navek668
28-06-2019, 06:33 PM
I haven’t tried but would doubt it would fit snug or would need to be cut higher at rear end as much lower clearance at the rear on the L1, I may be wrong?
mark christopher
28-06-2019, 08:20 PM
Does the L1 shell fit on the K1/K1 Aero series?
Note without butchery and will look terrible
lynx75
02-07-2019, 09:52 AM
Help!
Hi All,
I am building the CAT L1 and the layshaft (step 11 - step 12 in the manual) has axial play. I've used the shim (the only one) provided but its playing a bit in my opinion. I cannot attached here the video because its not possible. I hope you understand anyway and give me advice.
Thanks
mark christopher
03-07-2019, 07:44 PM
Help!
Hi All,
I am building the CAT L1 and the layshaft (step 11 - step 12 in the manual) has axial play. I've used the shim (the only one) provided but its playing a bit in my opinion. I cannot attached here the video because its not possible. I hope you understand anyway and give me advice.
Thanks
its normal, you can fix by a bit of loctice on the bearings into the houseing, but the play does not effect the car at all
Typpo
08-07-2019, 01:13 PM
I haven’t tried but would doubt it would fit snug or would need to be cut higher at rear end as much lower clearance at the rear on the L1, I may be wrong?
Note without butchery and will look terrible
Thank you for the helpful responses.
lynx75
17-07-2019, 08:40 AM
its normal, you can fix by a bit of loctice on the bearings into the houseing, but the play does not effect the car at all
Thanks Mark. I will leave as it is.
Clive Loynes
20-11-2019, 10:11 AM
Just heard that the L1 prototype ballraced yokes, as modified by HBI, have done getting on for four months of heavy racing. The front end has been stripped down for inspection and the ballraces have been declared as good as new. No signs of wear.
The test period included one head-on shunt that broke a front arm but did not damage the ballraces.
The mod was requested due to finding that the original bushes became sloppy after about six meetings, as shown on the second picture below.
mark christopher
20-11-2019, 11:05 PM
The later hubs now have a harder steel insert so are lasting alot longer.
Nice work though :thumbsup:
Mic_B1
21-11-2019, 12:44 AM
Just heard that the L1 prototype ballraced yokes, as modified by HBI, have done getting on for four months of heavy racing. The front end has been stripped down for inspection and the ballraces have been declared as good as new. No signs of wear.
Where can someone find those modded yokes ?
Clive Loynes
21-11-2019, 04:14 PM
Where can someone find those modded yokes ?
There is a link to the HBI facebook page on the footer of my post.
But I think that you may already have worked that out. :thumbsup: (Michael?)
https://www.facebook.com/Hesketh-Bank-Innovations-768872353145927/
...and thanks Mark.
Mic_B1
22-11-2019, 06:49 AM
There is a link to the HBI facebook page on the footer of my post.
But I think that you may already have worked that out. :thumbsup: (Michael?)
https://www.facebook.com/Hesketh-Bank-Innovations-768872353145927/
...and thanks Mark.
:thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.