x6 motor heat sink

[dmsnick]

dose any one know if there is any companys that do a motor heat sink designed for the x6 if not do you know of one that will fit thanks.

[niggs98]

i used the nosram brushless cooling kit which has a massive heatsink. this is also available in blue to match all the espeed bits ;)

[Darren Boyle]

Nick,

The Large one from Nosram/LRP as Niggs says is about the most popualr but all the standard heatsinks from the likes of 3 Racing and Integy all fit well

[dmsnick]

nice one darren ill pick one up with my x6 squared when it gets hear cant wait!!!!:thumbsup:

[jono83]

i used the nosram brushless cooling kit which has a massive heatsink. this is also available in blue to match all the espeed bits ;)
ditto but jus use the heatsink as the fan is massive

this one but the nosram version
http://i604.photobucket.com/albums/tt129/jono051283/lrpmotorcooler.jpg

[alexb4]

Can anyone put a link to a where i can buy one of these lrp heatsink as i want one for the x6 thanks

[matdodd]

DMS have the LRP ones I got one last week, Ive not used it yet and it looks abit different to the one above but should do the job :thumbsup:

[panch]

Edit do a couple of these I use the first one..most shops can get these for you..:thumbsup:

http://www.hpiracing.co.uk/searchresults/heatsink/24,1

[Colinevan]

Has anyone got a pic of the heatsink fitted at all.

Thanks

Col.

[YoungChazz]

We continue sporadic work on something to bolt onto those two holes in the motor plate. Ellis has developed a part that we are investigating now.

Possible late January.

[alexb4]

Hi just recived my lrp fan same as the lrp pic posted on here but the motor pinion wont get near the spur to mesh up as the gearbox stops the motor slideing because the heatsink gets in the way, how do you guys get them to fit ? Alex

[Body Paint]

a. Take the fan off completely and slide the heatsink around till it fits

b. Take the fan off and slide the heatsink around and screw a 30mm fan onto the veins

Depends how much cooling is needed :thumbsup:

[YoungChazz]

We sent a preliminary design off to the shop to see if Ellis' design will be practical from a cost standpoint. It's a beautiful combination of heat sink and fan mount. The fan is perfectly mounted to blow right on the motor.

Last week they gave us a preliminary price that looks doable, so we asked Ellis to do C.A.D. for manufacturing. Christmas and all, Big E sent the C.A.D. the other day. Paul took a look, said "OK," and sent it on to the shop for a comprehensive quote.

If this works, you'll get a dialed heatsink anodized in Ellis' blue and the fan with all mounting hardware in one package. And, of course, it will fit and work perfectly.

Still a long way to go, and, as you can see from the front page, we have been busy...